Industrial Equipment Experts Since 1980 | Mon–Fri, 7 AM–6 PM ET
No bots. Real experts. 866-333-0728
Get a Fast Quote
Get a Fast Quote

Presto Lifts WT Series Wide Base Fixed Height Tilters

Presto Lifts WT Series Wide Base Fixed Height Tilters

A wide base fixed height tilter is a hydraulic tilt top on a wider frame that tips a large bin or container toward the operator so parts at the bottom can be reached without bending in. It does not raise or lower the load. The Presto WT Series sits on a 36" x 42" base, which Presto says gives the rigidity and stability for larger containers and loads that need more side support, and it tilts 30, 45, 60 or 90 degrees depending on the model.

Get a Fast Quote →Read our Buying Guide → 

Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.

Model Number Platform Size Degree of Tilt Capacity Price View Model
36" wide x 42" long
30 and 45
2,000 pounds
$10,474.96
36" wide x 42" long
30 and 45
4,000 pounds
$10,867.80
36" wide x 42" long
30 and 45
6,000 pounds
$12,286.32
36" wide x 42" long
60
2,000 pounds
$13,944.85
36" wide x 42" long
60
4,000 pounds
$14,184.93
36" wide x 42" long
60
6,000 pounds
$15,439.71
36" wide x 42" long
90
2,000 pounds
$14,316.50
36" wide x 42" long
90
4,000 pounds
$14,621.36
36" wide x 42" long
90
6,000 pounds
$16,148.95

Every WT tilter has a 36" x 42" platform, and Presto offers custom platforms up to 60" x 60". The WT30/45 models come with an 8" lip and the WT60 and WT90 models come with a 12" lip, with optional lips up to 24". An internal 1 hp, 115 V single phase power unit drives the tilt, a hand-held control on an 8 ft coil cord is standard, and a foot control is optional. The WT60 and WT90 have powered down cylinders. Presto says the tilters can be mounted on the floor, on fixed height stands or on top of a scissor lift.

Because a fixed height tilter is set in place, the container is placed on it rather than rolled on. The platform sits 7-1/2" or 8-1/2" high, which is above the seven inches the CustomMHS lift table guide gives as the limit for pallet jack loading, so a container is set on by forklift or by hand.

Product Lines
The WT Series has nine models in three capacities and four tilt angles. The WT30/45 models tilt to either 30 or 45 degrees and sit 7-1/2" high. The WT60 and WT90 models tilt 60 and 90 degrees, sit 8-1/2" high and have powered down cylinders. Each group is offered at 2,000, 4,000 and 6,000 lb.

Selecting the Right Model
◆ WT30/45 series (30 or 45 degree tilt, 7-1/2" high, 8" lip): WT30/45-20 (2,000 lb) tilts in 19 or 29 seconds, WT30/45-40 (4,000 lb) in 20 or 30 seconds and WT30/45-60 (6,000 lb) in 29 or 39 seconds.
◆ WT60 series (60 degree tilt, 8-1/2" high, 12" lip, powered down): WT60-20 (2,000 lb) tilts in 40 seconds, WT60-40 (4,000 lb) in 42 seconds and WT60-60 (6,000 lb) in 55 seconds.
◆ WT90 series (90 degree tilt, 8-1/2" high, 12" lip, powered down): WT90-20 (2,000 lb) tilts in 60 seconds, WT90-40 (4,000 lb) in 64 seconds and WT90-60 (6,000 lb) in 83 seconds.
◆ Tilt angle: Choose 30 or 45 degrees for most totes and bins, 60 degrees for deep containers, and 90 degrees when the container must be stood on end to empty it.

How much tilt does your container need?
The deeper the container, the more tilt it takes to reach the bottom, and the WT Series offers 30, 45, 60 and 90 degrees on the same 36" x 42" platform.
See how lowered height controls loadingin the CustomMHS lift table guide for the loading rule that applies if a pallet jack will set the container.

Where Commonly Used
Wide base tilters are commonly used at assembly, packing and machine feeding stations where parts are picked from large bins, gaylords and wire baskets that need the extra platform width.

CustomMHS carries the full line of Presto Lifts WT Series wide base fixed height tilters, backed by the manufacturer’s warranty.