Lift and Tilt Boxes of Different Widths With One Rotator

Quick Specs
♦ Model: ELFRA 1001-36, fork over design
♦ Capacity: 2,200 pounds
♦ Lifting Height: 36"
♦ Fork Span: 22" or 27" wide x 49" long forks
♦ Box Width Range: 31.5" to 48" (set by fork span, see below)
♦ Overall Height: 52.5"
♦ Tilt: Up to 60 degrees as supplied; optional clamps allow tilting past 60 degrees, up to 180 degrees
♦ Operation: Powered lift, manual push
♦ Configuration: With forks, without clamps
NOTE: Picture shown with optional clamps.

Why Use This Product
Reaching into deep boxes and crates is one of the most common causes of back strain at a workstation, and fixed-width box handlers force you to keep a separate tool for every box size. The ELFRA 1001-36 lifts the box to a 36" working height and tilts it toward the operator, so contents come to the worker instead of the worker leaning in. A handle-adjusted box holder lets one rotator handle boxes from 31.5" to 48" wide, which cuts changeover time in operations where box sizes change through the day.

Key Features Explained
♦ Handle-adjusted box holders: Turn the side handle to move the holders in or out to match the box, with no tools needed between box sizes.
♦ Fork span sets your box range: The 22" span fits boxes about 31.5" to 39" wide, and the 27" span fits boxes about 39" to 47" wide. Choose the span that matches the boxes you handle most.
♦ Controlled electric tilt: Tilt speed is adjustable, and a full 0 to 180 degree tilt takes a minimum of 30 seconds. The tilt motor is rated for intermittent use, not continuous running.
♦ Tilt angle and clamps: As supplied without clamps, tilt is limited to 60 degrees. Adding optional clamps lets you tilt past 60 degrees and fully empty boxes, with the 2,200 lb rating held even beyond 90 degrees.
♦ Powered lift, manual push: The electric lift raises and lowers the load, and the operator pushes the unit, keeping it simple to run in tight aisles and work cells.

Best-Fit Use Cases
♦ Picking parts from deep bulk boxes and crates at a workstation
♦ Feeding production lines from boxes of different sizes
♦ Mixed-SKU warehouses where box widths change throughout the day
♦ Floor-to-table-height transfer at standard work surfaces

Ready to Order
Choose the 22" or 27" fork span based on your box widths, and add clamps if you need to tilt past 60 degrees or empty boxes completely. For taller workstations, the ELFRA 1001 also comes in 47", 55", 63" and 75" lift heights. For straddle legs that fit around pallets, see the ELFSRA 1001. Call 866-333-0728 and we’ll help you match the configuration to your boxes.

Don’t see exactly what you need?
Not sure whether the 22" or 27" fork span fits your boxes, or whether solid-deck pallets mean you need straddle legs instead? Our buying guide compares all eight Logitrans box holder rotators side by side, including fixed vs. adjustable holders, fork over vs. straddle, and when powered drive is worth it.

Button 1: Read the Box Holder Rotator Buying Guide →
https://www.custommhs.com/guides/reel-lifts-rotators.html#s6

Button 2: Get a Fast Quote →
https://www.custommhs.com/product-quote-and-freight-quote

Tell us your box widths, the heaviest box weight, your working height and what the boxes sit on, and we’ll spec it. No obligation, and our team personally reviews every quote; it isn’t generated automatically.

All purchases include the manufacturer’s factory warranty

Watch Product Video