Logitrans ELFRA 1001-47 Rotator With Adjustable Box Holder | 2200 lb

Manufacturer: Logitrans Lifting Equipment

$18,003.15 each

Buy More, Save More – Unlock Bulk Savings Today!

Price: $16,894.35 (3 or more )

No codes. No phone calls. Discounts apply automatically

MFG's Part Number: ELFRA 1001-47

Price-match guarantee
16

Larger Quantities: Use Quote Form

Quantity

You need to choose the mandatory option to add this product to the cart.

Need higher volume or project pricing?
Request a quote for this model

Configure Your Product

Set of Clamps

Set of Side Support Plates

Wireless Control

Fork Span (O.D. Width)

Quick Specs
♦ Model: ELFRA 1001-47, fork over design
♦ Capacity: 2,200 pounds
♦ Lifting Height: 47"
♦ Fork Span: 22" or 27" wide x 49" long forks
♦ Box Width Range: 31.5" to 48" (set by fork span, see below)
♦ Overall Height: 60"
♦ Tilt: Up to 60 degrees as supplied; optional clamps allow tilting past 60 degrees, up to 180 degrees
♦ Operation: Powered lift, manual push
♦ Configuration: With forks, without clamps
NOTE: Picture shown with optional clamps.

Why Use This Product
Reaching into deep boxes and crates over and over is a leading source of back strain, and fixed-width box handlers mean keeping a separate tool for every box size. The ELFRA 1001-47 lifts the box to 47", above standard table height, and tilts it toward the operator, so workers at elevated benches or line-side stations reach contents without bending or stretching. A handle-adjusted box holder lets one rotator handle boxes from 31.5" to 48" wide, cutting changeover time when box sizes vary through the day.

Key Features Explained
♦ Handle-adjusted box holders: Turn the side handle to move the holders in or out to match the box, with no tools needed between box sizes.
♦ Fork span sets your box range: The 22" span fits boxes about 31.5" to 39" wide, and the 27" span fits boxes about 39" to 47" wide. Choose the span that matches the boxes you handle most.
♦ Controlled electric tilt: Tilt speed is adjustable, and a full 0 to 180 degree tilt takes a minimum of 30 seconds. The tilt motor is rated for intermittent use, not continuous running.
♦ Tilt angle and clamps: As supplied without clamps, tilt is limited to 60 degrees. Adding optional clamps lets you tilt past 60 degrees and fully empty boxes, with the 2,200 lb rating held even beyond 90 degrees.
♦ Powered lift, manual push: The electric lift raises and lowers the load, and the operator pushes the unit, keeping it simple to run in tight aisles and work cells.

Best-Fit Use Cases
♦ Presenting parts at elevated workbenches and assembly stations
♦ Feeding conveyor infeeds and line-side stations from bulk boxes
♦ Picking, sorting and inspection from deep boxes and crates
♦ Mixed-SKU operations where box widths change throughout the day

Ready to Order
Choose the 22" or 27" fork span based on your box widths, and add clamps if you need to tilt past 60 degrees or empty boxes completely. The ELFRA 1001 also comes in 36", 55", 63" and 75" lift heights. For straddle legs that fit around pallets, see the ELFSRA 1001. Call 866-333-0728 and we’ll help you match the configuration to your boxes.

Don’t see exactly what you need?
Choosing the 47" model for its extra height? Tilting only works when the rotation center sits between 27" and 46.5" off the floor, so a taller lift doesn’t buy a bigger tilting window. Our buying guide explains the tilt limits, fork span and box width ranges, and how all eight Logitrans box holder rotators compare.

Button 1: Read the Box Holder Rotator Buying Guide →
https://www.custommhs.com/guides/reel-lifts-rotators.html#s6

Button 2: Get a Fast Quote →
https://www.custommhs.com/product-quote-and-freight-quote

Tell us your box widths, the heaviest box weight, your working height and what the boxes sit on, and we’ll spec it. No obligation, and our team personally reviews every quote; it isn’t generated automatically.

Watch Product Video

Fork Size: 22" or 27" wide x 49" long ♦ Lifting Height: 47" ♦ Capacity: 2,200 pounds ♦ Powered Lift, Manual Push DURABILITY ♦ Low maintenance costs - no relays and wearing parts ♦ SAFETY ♦ Tilting function is deactivated when the rotation center is more than 46,50" or less than 27" above the floor. EFFICIENCY AND FLEXIBILITY ♦ Height adjustment, rotation and transportation in the same unit ♦ Easy to set degree of tilt and rotation speed ♦ Precise and controlled acceleration/deceleration on rotation at start/stop ♦ Tilting function is deactivated automatically, when rotating to neutral position ♦ Remote control for rotation/lifting/lowering (with cable as standard/wireless as optional extra) DIGITAL CONTROLLER ♦ Large display – easy to use, easy visual presentation, touch screen ♦ Possible to program e.g. several stops, turning angle, speed, rotation ♦ Log function, e.g. operational time, current consumption, number of operations, overload registration, battery status ♦ Shows error messages and actual position/turning angle OPTIONAL EXTRAS ♦ Depending on the type and weight of the box and the working situation the following can be chosen: ♦ Clamp which hold boxes of heights between 15” and 34.25”, when tilted (also 180°). Clamps are recommended when tilting more than 60° ♦ Side support plates

Product Information

Instruction Manual

Customization Options

Want to be sure you’re paying the lowest price?
We guarantee it.

We stand behind our pricing. If you find the same product at a lower price from an authorized dealer selling the identical model number, let us know. Fill out the form below with the competing price and a link, and we'll verify and respond within 1 business day. We want to earn your business.

If you find one of our products with lower price than ours, please use this form. We will compare the prices and will offer you the product on the same price!

Here’s how it works:

1. Found a cheaper price?
2. Ask us for a price match - Just fill out the form and we’ll check the details.

Please fill in the form below: * Required fields

* Your Name:
* Your Email:
* Price in other store: Our price: $18,003.15
* Link to the product:
Comments (optional):

Frequently Asked Questions (FAQs)

What is the Logitrans ELFRA 1001 Rotator with Adjustable Box Holder?

The Logitrans ELFRA 1001 Rotator with Adjustable Box Holder is a material handling unit designed to lift, position, and tilt boxes or crates for easier access. It adapts to changing load sizes with adjustable box holders fitting box widths from 31.5 inches to 48 inches, supporting up to 2,200 pounds with tilting capability beyond 90 degrees for ergonomic handling and flexible box positioning.

How does the ELFRA 1001 help improve facility workflow?

The ELFRA 1001 improves workflow by lifting loads from 36 inches to 75 inches and tilting them for easier access, reducing manual repositioning and strain during repetitive tasks. Its compact manual push design allows easy movement between workstations, while the adjustable box holder minimizes downtime when handling mixed container sizes.

Where is the ELFRA 1001 Rotator with Adjustable Box Holder typically used?

The ELFRA 1001 is typically used in assembly areas, picking departments, kitting stations, production spaces, warehouses, and light manufacturing operations. It is ideal for accessing parts, components, packaging, or materials from boxes and crates, with an adjustable box holder for facilities handling varying container sizes.

Why should a facility consider a rotator with an adjustable box holder?

A facility should consider a rotator with an adjustable box holder like the Logitrans ELFRA 1001 to handle mixed container sizes flexibly. It reduces bending and manual repositioning, supporting ergonomic handling with powered lift and manual push travel for controlled movement in tight spaces.

Is the manufacturer’s warranty included with my purchase?

Yes, all products sold on CustomMHS.com include the original manufacturer’s warranty unless otherwise noted. Custom MHS is an authorized dealer, ensuring your purchase is covered by the manufacturer's full factory warranty.

Do you offer bulk pricing or discounts on large orders?

Yes, many products include automatic quantity price breaks. For larger orders, you can email us for project pricing, and we can provide improved volume pricing and help coordinate logistics for staged deliveries or multi-location shipments.

Why purchase from CustomMHS.com?

CustomMHS.com specializes in storage and material handling, helping select the correct equipment configuration to avoid errors and downtime. We reference manufacturer’s model numbers for simple and fair price comparisons, ensuring you get the best deal without guessing on specs.

Tags: Interthor Logitrans