Logitrans ELFRA 1001-55 Rotator With Adjustable Box Holder

Manufacturer: Logitrans Lifting Equipment

$18,265.50 each

Buy More, Save More – Unlock Bulk Savings Today!

Price: $17,136.90 (3 or more )

No codes. No phone calls. Discounts apply automatically

MFG's Part Number: ELFRA 1001-55

Price-match guarantee
16

Larger Quantities: Use Quote Form

Quantity

You need to choose the mandatory option to add this product to the cart.

Need higher volume or project pricing?
Request a quote for this model

Configure Your Product

Wireless Control

Set of Side Support Plates

Set of Clamps

Fork Span (O.D. Width)

Quick Specs
♦ Model: ELFRA 1001-55, fork over design
♦ Capacity: 2,200 pounds
♦ Lifting Height: 55"
♦ Fork Span: 22" or 27" wide x 49" long forks
♦ Box Width Range: 31.5" to 48" (set by fork span, see below)
♦ Overall Height: 68"
♦ Tilt: Up to 60 degrees as supplied; optional clamps allow tilting past 60 degrees, up to 180 degrees
♦ Tilt Window: Tilting works when the rotation center is between 27" and 46.5" above the floor
♦ Operation: Powered lift, manual push
♦ Configuration: With forks, without clamps
NOTE: Picture shown with optional clamps.

Why Use This Product
Fixed-width box handlers force awkward reaching and mean keeping a separate tool for every box size. The ELFRA 1001-55 lifts boxes to 55", high enough to present loads at tall workstations or set them on elevated staging. It also tilts boxes toward the operator within its tilt window, so contents come to the worker. A handle-adjusted box holder lets one rotator handle boxes from 31.5" to 48" wide, cutting changeover time when box sizes vary through the day. If your job is mainly tilting rather than lifting high, a shorter ELFRA model gives you the same tilting range for less.

Key Features Explained
♦ Handle-adjusted box holders: Turn the side handle to move the holders in or out to match the box, with no tools needed between box sizes.
♦ Fork span sets your box range: The 22" span fits boxes about 31.5" to 39" wide, and the 27" span fits boxes about 39" to 47" wide. Choose the span that matches the boxes you handle most.
♦ Lift height vs. tilt height: The full 55" is available for lifting and placing. Tilting works only with the rotation center between 27" and 46.5" off the floor, so plan tilting tasks within that window.
♦ Tilt angle and clamps: As supplied without clamps, tilt is limited to 60 degrees. Adding optional clamps lets you tilt past 60 degrees and fully empty boxes, with the 2,200 lb rating held even beyond 90 degrees. Tilt speed is adjustable, and a full 0 to 180 degree tilt takes a minimum of 30 seconds.
♦ Powered lift, manual push: The electric lift raises and lowers the load, and the operator pushes the unit, keeping it simple to run in tight aisles and work cells.

Best-Fit Use Cases
♦ Presenting boxes at tall workstations and elevated benches
♦ Placing boxes onto elevated staging, shelves or conveyor infeeds
♦ Kitting, inspection and replenishment from deep boxes and crates
♦ Mixed-SKU operations where box widths change throughout the day

Ready to Order
Choose the 22" or 27" fork span based on your box widths, and add clamps if you need to tilt past 60 degrees or empty boxes completely. The ELFRA 1001 also comes in 36", 47", 63" and 75" lift heights. For straddle legs that fit around pallets, see the ELFSRA 1001. Call 866-333-0728 and we’ll help you match the configuration to your boxes.

Is the ELFRA 1001-55 the Right Rotator for Your Boxes?
Picked the 55" model for its height? Lifting reaches the full 55", but tilting only works with the rotation center between 27" and 46.5" off the floor, so the extra height helps with placing, not tilting. Our buying guide explains the tilt limits, fork span and box width ranges, and how all eight Logitrans box holder rotators compare.

Button 1: Compare the ELFRA 1001-55 in Our Box Holder Rotator Buying Guide →
https://www.custommhs.com/guides/reel-lifts-rotators.html#s6

Button 2: Get a Fast Quote on the ELFRA 1001-55 →
https://www.custommhs.com/product-quote-and-freight-quote

Closing line: Tell us your box widths, the heaviest box weight, your working height and what the boxes sit on, and we’ll spec it. No obligation, and our team personally reviews every quote; it isn’t generated automatically.

CustomMHS is an authorized distributor for all brands on this page. All purchases include the manufacturer’s factory warranty

Watch Product Video

Fork Size: 22" or 27" wide x 49" long ♦ Lifting Height: 55" ♦ Capacity: 2,200 pounds ♦ Powered Lift, Manual Push DURABILITY ♦ Low maintenance costs - no relays and wearing parts ♦ SAFETY ♦ Tilting function is deactivated when the rotation center is more than 46,50" or less than 27" above the floor. EFFICIENCY AND FLEXIBILITY ♦ Height adjustment, rotation and transportation in the same unit ♦ Easy to set degree of tilt and rotation speed ♦ Precise and controlled acceleration/deceleration on rotation at start/stop ♦ Tilting function is deactivated automatically, when rotating to neutral position ♦ Remote control for rotation/lifting/lowering (with cable as standard/wireless as optional extra) DIGITAL CONTROLLER ♦ Large display – easy to use, easy visual presentation, touch screen ♦ Possible to program e.g. several stops, turning angle, speed, rotation ♦ Log function, e.g. operational time, current consumption, number of operations, overload registration, battery status ♦ Shows error messages and actual position/turning angle OPTIONAL EXTRAS ♦ Depending on the type and weight of the box and the working situation the following can be chosen: ♦ Clamp which hold boxes of heights between 15” and 34.25”, when tilted (also 180°). Clamps are recommended when tilting more than 60° ♦ Side support plates

Product Information

Instruction Manual

Customization Options

Want to be sure you’re paying the lowest price?
We guarantee it.

We stand behind our pricing. If you find the same product at a lower price from an authorized dealer selling the identical model number, let us know. Fill out the form below with the competing price and a link, and we'll verify and respond within 1 business day. We want to earn your business.

If you find one of our products with lower price than ours, please use this form. We will compare the prices and will offer you the product on the same price!

Here’s how it works:

1. Found a cheaper price?
2. Ask us for a price match - Just fill out the form and we’ll check the details.

Please fill in the form below: * Required fields

* Your Name:
* Your Email:
* Price in other store: Our price: $18,265.50
* Link to the product:
Comments (optional):

Frequently Asked Questions (FAQs)

What is the Logitrans ELFRA 1001 Rotator with Adjustable Box Holder?

The Logitrans ELFRA 1001 Rotator with Adjustable Box Holder is a material handling unit designed to lift, position, and tilt boxes or crates for easier access. It is useful for operations that handle containers of varying widths and need a single machine that can adapt to changing load sizes. The adjustable box holders can be set with a handle and fit box widths from 31.5 inches to 48 inches. With a 2,200-pound capacity and the ability to tilt loads beyond 90 degrees, it helps operators reach contents without unnecessary bending or stretching. This makes it a practical choice for facilities focused on ergonomic handling and flexible box positioning.

How does the ELFRA 1001 help improve facility workflow?

The ELFRA 1001 helps improve workflow by bringing boxes, crates, and containers to a better working height and access angle. Operators can lift loads from 36 inches to 75 inches, then tilt them for easier sorting, picking, emptying, or transferring. This can reduce time spent repositioning containers by hand and help limit strain during repetitive tasks. The manual push design keeps the unit compact and easy to move between workstations. For facilities that handle mixed container sizes, the adjustable box holder helps reduce downtime between different jobs.

Where is the ELFRA 1001 Rotator with Adjustable Box Holder typically used?

The ELFRA 1001 is commonly used in assembly areas, picking departments, kitting stations, production spaces, warehouses, and light manufacturing operations. It is useful where workers need to access parts, components, packaging, or materials from boxes and crates throughout the day. Operators can use it to tilt containers for sorting, transferring, replenishing, inspecting, or supplying workstations. Its adjustable box holder makes it helpful in facilities where container sizes change from one job to another. The compact manual push design also makes it practical for moving between nearby work areas.

Why should a facility consider a rotator with an adjustable box holder?

A rotator with an adjustable box holder can help facilities handle mixed container sizes without relying on fixed equipment for each box type. The Logitrans ELFRA 1001 allows operators to quickly adjust the holder, lift the load to working height, and tilt it for better access. This can reduce bending, reaching, and manual repositioning during repetitive handling tasks. A powered lift helps reduce the physical effort required for vertical positioning, while manual push travel supports controlled movement in tight spaces. For operations requiring flexible, ergonomic box handling, the ELFRA 1001 offers a practical way to improve daily material flow.

Is the manufacturer’s warranty included with my purchase?

Yes. All products sold on CustomMHS.com include the original manufacturer’s warranty unless otherwise noted. Custom MHS is an authorized dealer for the brands we carry, which means your purchase is covered by the manufacturer's full factory warranty.

Do you offer bulk pricing or discounts on large orders?

Yes. Many products include automatic quantity price breaks. If you’re outfitting a facility or placing a larger order, email us for project pricing. We can often provide improved volume pricing and help coordinate logistics for staged deliveries or multi-location shipments. Contact: [email protected]

Why purchase from CustomMHS.com?

CustomMHS.com supports manufacturing and distribution operations that need equipment that fits right the first time. We specialize in storage and material handling, and we help you select the correct configuration up front to avoid errors that cause delays, reorders, and costly downtime. To make price comparisons simple and fair, we reference the manufacturer’s model number on our listings and quotes whenever available. That way, you can compare the exact same item across suppliers apples to apples, so you can verify you’re getting the best deal without guessing whether the specs match.

Tags: container tilter, wire basket tilter, box rotator, industrial rotator, product tilter