Logitrans ELFRR 1001 Reel Rotator, Fork Over Design
-
- Manufacturer: Logitrans Lifting Equipment
-
$29,917.80 each
Buy More, Save More – Unlock Bulk Savings Today!
Price: $28,067.49 (3 or more )
No codes. No phone calls. Discounts apply automatically
MFG's Part Number: ELFRR 1001Price-match guarantee
16
Request a quote for this model
Quick Specs
♦ Model: ELFRR 1001, fork over design (listed by Logitrans as ELFRRE 1001)
♦ Capacity: 1,100 pounds
♦ Reel Diameter: 4.7" to 50" (31.5" to 50" with three-point clamping)
♦ Gripping Arm Opening: Up to 51"
♦ Lifting Height: 69"
♦ Lowered Height: 8.9"
♦ Lifting Speed: 2" per second loaded, 2.75" per second empty
♦ Rotation: Electric and programmable, at lift heights above 32.5"
♦ Overall Size: 68" long x 38.6" wide x 75.8" tall (gripping arms 45.3" to 56.9" wide)
♦ Width Between Legs: 11.2"
♦ Aisle Width: 90" rated; Logitrans testing shows 67" is enough
♦ Weight: 904 pounds without battery
♦ Operation: Electric lift, electric clamping, electric rotation, manual push
♦ Controls: Remote control and touchscreen controller; hand brake
Why Use This Product
Turning a loaded reel by hand at height is the hardest of the four reel handling tasks to repeat all day. The ELFRR 1001 powers it. From a remote, the operator clamps the reel with rubber-padded gripping arms, lifts it up to 69", and rotates it electrically to a programmed angle, so the reel lands in the same orientation every time. Only travel stays manual, which keeps the machine well below the cost of the fully powered SELFRR Maxi 1003 when travel distances are short. It’s the model to choose when reels are indexed many times a shift and manual rotation has become the bottleneck.
Key Features Explained
♦ Programmable electric rotation: The touchscreen controller lets you preset stops, turning angle, speed and rotation, logs operating data and shows error messages, so every reel is turned the same way.
♦ Rubber-padded gripping arms: The arms close on the reel flanges with rubber-covered pads for maximum friction and a gentle grip on soft, smooth and hard reels. Two-point clamping covers reels from 4.7" to 50", and three-point clamping holds larger reels from 31.5" to 50".
♦ Release interlock: The gripping arms can’t be opened by mistake during transport, and once a reel over 176 pounds is clamped, it can only be released when it’s resting on the floor or a pallet.
♦ 32.5" minimum rotation height: Electric rotation works only above 32.5" of lift, so the arms can’t strike the floor or legs. A 48" reel rotated at that height reaches about 56.5" at the top of the flange, so check overhead clearance in your layout.
♦ Operator certification: The electric lift makes this a powered industrial truck under OSHA 29 CFR 1910.178, so every operator must be trained, evaluated and certified by the employer before use.
Best-Fit Use Cases
♦ High-frequency reel indexing at printing, converting and packaging lines
♦ Turning reels from vertical to horizontal for machine loading
♦ Lifting horizontal reels out of production machines
♦ Repeat handling where the same rotation angle is needed every time
Ready to Order
Check that your largest reel is within 50" in diameter, and weigh your heaviest loaded reel: a full reel of heavy cable can easily pass the 1,100 lb capacity. Lay out your work so reels are lifted above 32.5" before rotating. The fork-over design needs open-entry pallets. For solid-deck or closed-bottom pallets, choose the straddle-leg ELFSRR 1001. If rotation at low heights matters more than powered rotation, the ELFRRM 1001 costs less, and for powered travel, see the SELFRR Maxi 1003. Call 866-333-0728 and we’ll help you match the rotator to your reels.
Is the ELFRR 1001 the Right Reel Rotator for You?
Electric rotation is a bigger step up than electric lift, and it brings the 32.5" minimum rotation height with it. Our buying guide compares all eight Logitrans reel rotators model by model, with reel sizes, loaded reel weights and when powered rotation pays off.
Button 1: Compare the ELFRR 1001 in Our Reel Lifts & Rotators Buying Guide →
https://www.custommhs.com/guides/reel-lifts-rotators.html#s5
Button 2: Get a Fast Quote on the ELFRR 1001 →
https://www.custommhs.com/product-quote-and-freight-quote
Closing line: Tell us your largest reel diameter, the weight of your heaviest loaded reel, what the reels sit on and how many reels you rotate per shift, and we’ll spec it. No obligation, and our team personally reviews every quote; it isn’t generated automatically.
CustomMHS is an authorized distributor for all brands on this page. All purchases include the manufacturer’s factory warranty
Watch Product Video
Product Information
We guarantee it.
We stand behind our pricing. If you find the same product at a lower price from an authorized dealer selling the identical model number, let us know. Fill out the form below with the competing price and a link, and we'll verify and respond within 1 business day. We want to earn your business.
If you find one of our products with lower price than ours, please use this form. We will compare the prices and will offer you the product on the same price!
Here’s how it works:
1. Found a cheaper price?
2. Ask us for a price match - Just fill out the form and we’ll check the details.
