What is the Logitrans ELFRRM 1001 Reel Rotator?

The Logitrans ELFRRM 1001 Reel Rotator is a fork-over reel handling unit designed to transport, lift, clamp, and rotate heavy reels. It has a 1,100-pound capacity and a 69-inch lifting height, making it useful for many reel handling tasks in production and warehouse environments. The unit can handle soft and hard reels up to 50 inches in diameter. Rubber-covered pads on the gripping arms help increase friction while protecting the reel surface during handling. Its compact design supports controlled movement in areas where larger equipment may be difficult to use.

How does the ELFRRM 1001 Reel Rotator help improve facility workflow?

The ELFRRM 1001 helps improve workflow by making reel movement, lifting, clamping, and rotation more controlled. Operators can use it to move reels between storage, staging, production lines, and processing equipment with less manual strain. Electric lifting and fastening reduce the effort needed to raise and secure the reel. Manual push travel and manual rotation keep the operation straightforward while still allowing controlled positioning. This helps facilities reduce awkward handling during reel changeovers and daily material movement.

What key features does the Logitrans ELFRRM 1001 Reel Rotator offer?

The Logitrans ELFRRM 1001 Reel Rotator features electric lift, electric reel fastening, manual push travel, and manual rotation. Its tilt angle can be set in 90-degree increments using a locking system, which helps operators position reels consistently. A remote control allows reel fastening and releasing without awkward reaching. A positioning valve is available for precise, quiet load positioning when alignment is critical. The gripping arms are designed to prevent accidental opening, and reels can only be released when placed on the floor or on a pallet.

Where is the ELFRRM 1001 Reel Rotator typically used?

The ELFRRM 1001 Reel Rotator is commonly used in converting, printing, packaging, film, paper, textile, and manufacturing operations. It is useful for loading and unloading reels, rotating reels between vertical and horizontal positions, and moving reels between receiving, storage, staging, and production areas. Operators can use it to align reels with spindles, unwind stands, mandrels, reel racks, or processing equipment. The fork-over design works well for compatible pallets and for floor-level reel handling tasks. Facilities that regularly handle reels can use this equipment to improve control and reduce the risks of manual handling.

Why should a facility consider an electric lift reel rotator with manual rotation?

An electric lift reel rotator with manual rotation can be useful when a facility needs powered lifting and secure clamping but does not require fully powered rotation. The Logitrans ELFRRM 1001 helps reduce strain by using electric lifting and fastening for the heavier parts of the handling process. Manual rotation gives operators direct control when setting reel orientation in 90-degree increments. Rubber-covered gripping pads help protect reels from surface damage while maintaining a secure hold. For operations requiring safer, more repeatable reel handling, this rotator offers a practical material-handling solution.

Is the manufacturer’s warranty included with my purchase?

Yes. All products sold on CustomMHS.com include the original manufacturer’s warranty unless otherwise noted. Custom MHS is an authorized dealer for the brands we carry, which means your purchase is covered by the manufacturer's full factory warranty.

Do you offer bulk pricing or discounts on large orders?

Yes. Many products include automatic quantity price breaks. If you’re outfitting a facility or placing a larger order, email us for project pricing. We can often provide improved volume pricing and help coordinate logistics for staged deliveries or multi-location shipments. Contact: sales@custommhs.com.

Why purchase from CustomMHS.com?

CustomMHS.com supports manufacturing and distribution operations that need equipment that fits right the first time. We specialize in storage and material handling, and we help you select the correct configuration up front to avoid errors that cause delays, reorders, and costly downtime. To make price comparisons simple and fair, we reference the manufacturer’s model number on our listings and quotes whenever available. That way, you can compare the exact same item across suppliers apples to apples, so you can verify you’re getting the best deal without guessing whether the specs match.

Logitrans ELFRRM 1001 Reel Rotator, Fork Over Design

Manufacturer: Logitrans Lifting Equipment

$25,705.35 each

Buy More, Save More – Unlock Bulk Savings Today!

Price: $24,314.40 (3 or more )

No codes. No phone calls. Discounts apply automatically

MFG's Part Number: ELFRRM 1001

Price-match guarantee
16

Larger Quantities: Use Quote Form

Quantity

You need to choose the mandatory option to add this product to the cart.

Need higher volume or project pricing?
Request a quote for this model

Quick Specs
♦ Model: ELFRRM 1001, fork over design
♦ Capacity: 1,100 pounds
♦ Reel Diameter: 4.7" to 50" (31.5" to 50" with three-point clamping)
♦ Gripping Arm Opening: Up to 51"
♦ Lifting Height: 69"
♦ Lowered Height: 8.9"
♦ Lifting Speed: 2" per second loaded, 2.75" per second empty
♦ Rotation: Manual, locks every 90 degrees
♦ Overall Size: 68" long x 38.6" wide x 75.8" tall (gripping arms 45.3" to 56.9" wide)
♦ Width Between Legs: 11.2"
♦ Aisle Width: 90" rated; Logitrans testing shows 67" is enough
♦ Weight: 904 pounds without battery
♦ Operation: Electric lift, electric clamping, manual push, manual rotation
♦ Controls: Remote control for clamping, lifting and lowering; hand brake

Why Use This Product
Pumping a heavy reel up by hand on every pick is the hardest, most repetitive part of manual reel handling. The ELFRRM 1001 takes that out of the job: from a remote control, the operator clamps the reel with the rubber-padded gripping arms and lifts it electrically up to 69". Rotation stays manual, turned by hand and locked at each 90-degree step, which keeps the price well below the electric-rotation models. It also means there’s no minimum rotation height, so reels can be turned at any lift height. It’s the smallest, least expensive step up from a fully manual rotator, and the one Logitrans recommends when reels are moved short distances or handled a few times a shift.

Key Features Explained
♦ Electric lift and clamping by remote: The remote control clamps and releases the reel and raises and lowers it. Loaded lift runs about 2" per second, with no pumping.
♦ Rubber-padded gripping arms: The arms close on the reel flanges with rubber-covered pads for maximum friction and a gentle grip on soft, smooth and hard reels. Two-point clamping covers reels from 4.7" to 50", and three-point clamping holds larger reels from 31.5" to 50".
♦ Release interlock: The gripping arms can’t be opened by mistake during transport, and once a reel over 176 pounds is clamped, it can only be released when it’s resting on the floor or a pallet.
♦ Manual rotation with no height limit: The operator turns the reel and a locking system holds it at each 90-degree position. The 32.5" minimum rotation height applies only to electric-rotation models, so the ELFRRM can turn reels at any lift height.
♦ Operator certification: The electric lift makes this a powered industrial truck under OSHA 29 CFR 1910.178, so every operator must be trained, evaluated and certified by the employer before use.

Best-Fit Use Cases
♦ Loading and unloading reels at printing, converting, packaging and film lines
♦ Lifting reels vertically off a pallet and placing them in a machine
♦ Turning reels at low heights where electric rotation can’t operate
♦ Moderate-volume reel handling over short travel distances

Ready to Order
Check that your largest reel is within 50" in diameter, and weigh your heaviest loaded reel: a full reel of heavy cable can easily pass the 1,100 lb capacity. The fork-over design needs open-entry pallets. For solid-deck or closed-bottom pallets, choose the straddle-leg ELFSRRM 1001. For electric rotation, step up to the ELFRR 1001, and for fully manual operation with no certification requirement, see the LFRRM 1001. Call 866-333-0728 and we’ll help you match the rotator to your reels.

Is the ELFRRM 1001 the Right Reel Rotator for You?
Electric lift is the smallest step up the reel rotator ladder, and it’s also the step that brings OSHA operator certification. Our buying guide compares all eight Logitrans reel rotators model by model, with reel sizes, loaded reel weights and which functions are worth powering first.

Button 1: Compare the ELFRRM 1001 in Our Reel Lifts & Rotators Buying Guide →
https://www.custommhs.com/guides/reel-lifts-rotators.html#s5

Button 2: Get a Fast Quote on the ELFRRM 1001 →
https://www.custommhs.com/product-quote-and-freight-quote

Closing line: Tell us your largest reel diameter, the weight of your heaviest loaded reel, what the reels sit on and how often you handle them, and we’ll spec it. No obligation, and our team personally reviews every quote; it isn’t generated automatically.

CustomMHS is an authorized distributor for all brands on this page. All purchases include the manufacturer’s factory warranty

Watch Product Video

Lifting Height: 69" ♦ Capacity: 1,100 pounds ♦ Electric Lift, Manual Push, Manual Rotation, Manual Clamping ♦ Fork over Design ELFRRM 1001 (electric lifting and fastening, manual rotation and propulsion) ♦ The tilt degree can be set for every 90° (with a locking system) ♦ Remote control for reel fastening/releasing ♦ Positioning valve available (precise and quiet positioning of the load) EFFICIENCY AND FLEXIBILITY ♦ Capacity 1,100 lbs. ♦ Handles vertical reels (eye-to-sky) placed on the floor or on a pallet and horizontal (eye-to-horizon) that are clear off the floor ♦ Handles reel diameters from Ø4.7” to Ø50” (gripping arms can open 51”) ♦ Manages soft as well as smooth and hard reels ♦ Available with straddle legs. SAFETY ♦ None of the models can open the gripping arms by mistake ♦ The reels can only be released, when placed on floor or pallet ♦ The reel is fixed with gripping arms ♦ The gripping arms have rubber-covered gripping pads to achieve the largest friction and to ensure a gentle grip ♦ On models with electric rotation, it is only possible to rotate at lifting heights above 32.5”, so the gripping arms will not collide with the floor or legs. DURABILITY ♦ Strong construction ♦ Long operating life ♦ Low maintenance costs DIGITAL CONTROLLER ♦ Large display – easy to use, easy visual presentation, touch screen ♦ Possible to program e.g. several stops, turning angle, speed, rotation ♦ Log function, e.g. operational time, current consumption, number of operations, overload registration, battery status ♦ Shows error messages and actual position/turning angle

Product Information

Want to be sure you’re paying the lowest price?
We guarantee it.

We stand behind our pricing. If you find the same product at a lower price from an authorized dealer selling the identical model number, let us know. Fill out the form below with the competing price and a link, and we'll verify and respond within 1 business day. We want to earn your business.

If you find one of our products with lower price than ours, please use this form. We will compare the prices and will offer you the product on the same price!

Here’s how it works:

1. Found a cheaper price?
2. Ask us for a price match - Just fill out the form and we’ll check the details.

Please fill in the form below: * Required fields

* Your Name:
* Your Email:
* Price in other store: Our price: $25,705.35
* Link to the product:
Comments (optional):

Tags: reel rotator, industrial reel rotator, paper rotator

Logitrans ELFRRM 1001 Reel Rotator, Fork Over Design

Watch Product Video

Product Information

Frequently Asked Questions (FAQs)

What is the Logitrans ELFRRM 1001 Reel Rotator?

How does the ELFRRM 1001 Reel Rotator help improve facility workflow?

What key features does the Logitrans ELFRRM 1001 Reel Rotator offer?

Where is the ELFRRM 1001 Reel Rotator typically used?

Why should a facility consider an electric lift reel rotator with manual rotation?

Is the manufacturer’s warranty included with my purchase?

Do you offer bulk pricing or discounts on large orders?

Why purchase from CustomMHS.com?

Customer Also Bought

Logitrans LFRRM 1001 Reel Rotator, Fork Over Design

Logitrans ELFRR 1001 Reel Rotator, Fork Over Design

Logitrans SELFRR Maxi 1003 Fully Powered Reel Rotator, Fork Over Design...