Logitrans ELFSR 1001-47 Rotator With Non-Adjustable Box Holder and Straddle Legs

Quick Specs
♦ Model: ELFSR 1001-47, straddle leg design
♦ Capacity: 2,200 pounds (1,760 pounds with Option D straddle width)
♦ Lifting Height: 47"
♦ Fork Span: 22" or 27" wide x 49" long forks
♦ Box Widths, 22" Fork Span: 31.5", 33.5", 37.4" or 39.4"
♦ Box Widths, 27" Fork Span: 39.4", 41.3", 45.3" or 47.2"
♦ Inside Straddle Width: A) 33" to 37", B) 37" to 44", C) 44" to 51", D) 49" to 56"
♦ Overall Height: 60"
♦ Tilt: Up to 60 degrees as supplied; optional clamps allow tilting past 60 degrees, up to 180 degrees
♦ Tilt Window: Tilting works when the rotation center is between 27" and 46.5" above the floor
♦ Operation: Powered lift, manual push
♦ Configuration: With forks, without clamps
NOTE: Picture shown with optional clamps.

Why Use This Product
A fork-over rotator only works with open-entry pallets, and an adjustable holder adds a feature you won’t use when every box is the same width. The ELFSR 1001-47 pairs straddle legs with fixed box holders. The legs run along the outside of the load, so solid-deck and closed-bottom pallets work as well as open ones, and the holders are set to your box width, so every box seats the same way, every time. It lifts boxes to 47", above standard table height, and tilts them toward the operator, so workers at elevated benches or line-side stations reach contents without bending.

Key Features Explained
♦ Straddle legs in four widths: The legs pass on the outside of the pallet or base, so every pallet type works. Choose the inside width to clear your widest pallet; overall width is the inside width plus about 6.5", and Option D (49" to 56") reduces capacity to 1,760 pounds.
♦ Fixed box holders, four positions: Each holder mounts in one of four width positions, changed by loosening and retightening a screw. The 22" fork span covers box widths from 31.5" to 39.4", and the 27" span covers 39.4" to 47.2".
♦ One or two sets of box holders: Logitrans calls for two box holders on each side when the box weighs between 1,100 and 2,200 pounds. Holders mount at two heights and should sit at or above the load’s center of gravity.
♦ Tilt angle and clamps: As supplied without clamps, tilt is limited to 60 degrees. Adding optional clamps lets you tilt past 60 degrees and fully empty boxes, with the 2,200 lb rating held even beyond 90 degrees. Tilt speed is adjustable, with smooth acceleration and deceleration at start and stop.
♦ Powered lift, manual push: The electric lift and tilt run from a remote control, cabled as standard with wireless available, and a touchscreen controller lets you program stops, turning angle and speed. The operator pushes the unit.

Best-Fit Use Cases
♦ Handling same-size boxes that arrive on solid-deck or closed-bottom pallets
♦ Presenting parts at elevated workbenches and assembly stations
♦ Feeding conveyor infeeds and line-side stations from bulk boxes
♦ Production lines fed from one standard box or crate size

Ready to Order
Select the straddle width that clears your widest pallet, the 22" or 27" fork span, and tell us your box width so the holders are set correctly. Add a second set of holders if your boxes weigh over 1,100 pounds, and clamps if you need to tilt past 60 degrees or empty boxes completely. Wireless control and side support plates are also available. The ELFSR 1001 comes in 36", 47", 55", 63" and 75" lift heights. If your pallets are all open-entry, the fork-over ELFR 1001-47 costs less, and for powered travel, see the SELFSR 1003. Call 866-333-0728 and we’ll help you match the configuration to your boxes.

Is the ELFSR 1001-47 the Right Rotator for Your Boxes?
Choosing the 47" model for its extra height? Tilting only works when the rotation center sits between 27" and 46.5" off the floor, so a taller lift doesn’t buy a bigger tilting window. Our buying guide compares all eight Logitrans box holder rotators, including which fixed holder widths come with each fork span and which straddle width clears your pallets.

Button 1: Compare the ELFSR 1001-47 in Our Box Holder Rotator Buying Guide →
https://www.custommhs.com/guides/reel-lifts-rotators.html#s6

Button 2: Get a Fast Quote on the ELFSR 1001-47 →
https://www.custommhs.com/product-quote-and-freight-quote

Closing line: Tell us your box width, the heaviest box weight, the width of your widest pallet and your working height, and we’ll spec it. No obligation, and our team personally reviews every quote; it isn’t generated automatically.

CustomMHS is an authorized distributor for all brands on this page. All purchases include the manufacturer’s factory warranty

Watch Product Video