Logitrans SELFR 1003-36 Fully Powered Rotator With Non-Adjustable Box Holder

Quick Specs
♦ Model: SELFR 1003-36, fork over design
♦ Capacity: 2,200 pounds
♦ Lifting Height: 36"
♦ Fork Span: 22" or 27" wide x 49" long forks
♦ Box Widths, 22" Fork Span: 31.5", 33.5", 37.4" or 39.4"
♦ Box Widths, 27" Fork Span: 39.4", 41.3", 45.3" or 47.2"
♦ Overall Height: 52.5"
♦ Tilt: Up to 60 degrees as supplied; optional clamps allow tilting past 60 degrees, up to 180 degrees
♦ Tilt Window: Tilting works when the rotation center is between 27" and 46.5" above the floor
♦ Operation: Powered lift, powered drive
♦ Configuration: With forks, without clamps
NOTE: Picture shown with optional clamps.

Why Use This Product
When the rotator runs all shift between stations and every box is the same width, you want powered travel and holders that never need adjusting. The SELFR 1003-36 adds a powered travel drive to the fixed-holder ELFR design, so the operator walks alongside while the machine carries the box. Its box holders are set to your box width, so every box seats the same way, every time. It lifts boxes to a 36" working height and tilts them toward the operator, so contents come to the worker. The fork-over design works with standard four-way pallets, open-bottom pallets and skids.

Key Features Explained
♦ Powered drive and digital controller: A 24 V, 1.2 kW drive with electronically variable speed moves the loaded rotator between stations. The touchscreen controller lets you program stops, turning angle, speed and rotation, and logs operating time, cycles, overloads and battery status.
♦ Fixed box holders, four positions: Each holder mounts in one of four width positions, changed by loosening and retightening a screw. The 22" fork span covers box widths from 31.5" to 39.4", and the 27" span covers 39.4" to 47.2".
♦ One or two sets of box holders: Logitrans calls for two box holders on each side when the box weighs between 1,100 and 2,200 pounds. Holders mount at two heights and should sit at or above the load’s center of gravity.
♦ Tilt angle and clamps: As supplied without clamps, tilt is limited to 60 degrees. Adding optional clamps lets you tilt past 60 degrees and fully empty boxes, with the 2,200 lb rating held even beyond 90 degrees. Tilt speed is adjustable, with smooth acceleration and deceleration at start and stop.
♦ Operator certification: As a powered industrial truck under OSHA 29 CFR 1910.178, every operator must be trained, evaluated and certified by the employer before use.

Best-Fit Use Cases
♦ High-cycle production lines fed from one standard box or crate size
♦ Long travel between receiving, staging and workstations
♦ Floor-to-table-height transfer at standard work surfaces
♦ Emptying same-size bins and crates with optional clamps

Ready to Order
Choose the 22" or 27" fork span and tell us your box width so the holders are set correctly, and a second set of holders if your boxes weigh over 1,100 pounds. Add clamps if you need to tilt past 60 degrees or empty boxes completely. Wireless control and side support plates are also available. The SELFR 1003 comes in 36", 47", 55", 63" and 75" lift heights. For short travel distances, the manual-push ELFR 1001-36 does the same lifting and tilting for less, and for closed-bottom pallets, see the straddle-leg SELFSR 1003. Call 866-333-0728 and we’ll help you match the configuration to your boxes.

Is the SELFR 1003-36 Worth the Powered Drive?
Powered drive is the single most expensive step in this product family. Our buying guide compares all eight Logitrans box holder rotators, including which fixed holder widths come with each fork span, so you can see whether powered travel is the upgrade that pays off for your travel distances.

Button 1: Compare the SELFR 1003-36 in Our Box Holder Rotator Buying Guide →
https://www.custommhs.com/guides/reel-lifts-rotators.html#s6

Button 2: Get a Fast Quote on the SELFR 1003-36 →
https://www.custommhs.com/product-quote-and-freight-quote

Tell us your box width, the heaviest box weight, your working height and how far the rotator travels, and we’ll spec it. No obligation, and our team personally reviews every quote; it isn’t generated automatically.

CustomMHS is an authorized distributor for all brands on this page. All purchases include the manufacturer’s factory warranty

Watch Product Video