Logitrans SELFRA 1003-63 Fully Powered Rotator Adjustable Box Holder with 2,200 pounds capacity

Logitrans Fully Powered Rotator Adjustable Box Holder SELFRA 1003-63

Quick Specs
♦ Capacity: 2,200 lbs
♦ Lifting Height: 63"
♦ Fork Size: 22" or 27" wide x 49" long
♦ Box Holder Adjustment: 31-1/2" to 48" wide, set by hand lever
♦ Design: Fork-over
♦ Drive: Powered lift, powered drive
♦ Tilt: Holds full 2,200 lb capacity past 90 degrees of tilt
♦ Supplied: With forks, without clamps. Clamps are an optional extra
♦ Safety Interlock: Tilting is disabled when the rotation center is above 46-1/2" or below 27" from the floor

Why Use This Product
Emptying a crate is a major source of back injuries. A worker leans over a four-foot-tall box, reaches to the bottom, and lifts parts out at arm's length, dozens of times a shift. A rotator removes that motion entirely. It picks up the crate, lifts it, and tilts it past 90 degrees so the contents present themselves at the operator's working height. Nobody reaches into the bottom of anything.

What separates the SELFRA from the plain SELFR is the adjustable holder. The holders slide on a hand lever to fit box widths anywhere from 31-1/2 to 48 inches, so one machine handles a mixed fleet of crates, gaylords, and returnable containers. If every container in your building is the same size, the fixed-holder SELFR does the same job for less. If they are not, the adjustment is what makes the machine usable rather than a machine that fits one SKU.

Because it is self-propelled, this is a powered industrial truck under OSHA 29 CFR 1910.178. Operators must be trained, authorized, and re-evaluated at least every three years. The ELFRA version of this same rotator uses manual propulsion, which changes that calculation, and it is worth asking whether you need powered travel or only powered lift.

Key Features Explained
♦ Adjustable Box Holders, 31-1/2 to 48 Inches: Width is set with a hand lever rather than tools, so one unit handles multiple container sizes without changeover time.
♦ Full Capacity Past 90 Degrees: The holder carries the rated 2,200 pounds even when tilted beyond vertical, which is what lets a full crate be emptied rather than just tipped.
♦ Powered Lift and Powered Drive: The operator steers rather than pushes, which matters when the same unit moves loaded containers across a plant all shift.
♦ Tilt Height Interlock: Tilting is locked out when the rotation center sits above 46-1/2 inches or below 27 inches, keeping the load inside the stable working window.
♦ Low Maintenance Design: Built without relays or conventional wearing parts, which reduces service intervals on a machine that runs continuously.

Best-Fit Use Cases
♦ Assembly and Production Feeding: Presenting crate contents at working height so operators pick without bending into the box.
♦ Food and Beverage Processing: Tipping and pouring bulk containers into hoppers, mixers, and wash lines.
♦ Packaging and Order Fulfillment: Emptying returnable containers and gaylords at the pack bench.
♦ Receiving and Decanting: Transferring bulk inbound product into totes and bins without manual lifting.

CustomMHS is an authorized distributor for all brands on this page. All purchases include the manufacturer's factory warranty.

Watch Product Video