Logitrans SELFSR 1003-36 Fully Powered Rotator With Non-Adjustable Box Holder and Straddle Legs

Quick Specs
♦ Model: SELFSR 1003-36, straddle leg design
♦ Capacity: 2,200 pounds (1,760 pounds with Option D straddle width)
♦ Lifting Height: 36"
♦ Fork Span: 22" or 27" wide x 49" long forks
♦ Box Widths, 22" Fork Span: 31.5", 33.5", 37.4" or 39.4"
♦ Box Widths, 27" Fork Span: 39.4", 41.3", 45.3" or 47.2"
♦ Inside Straddle Width: A) 33" to 37", B) 37" to 44", C) 44" to 51", D) 49" to 56"
♦ Overall Height: 52.5"
♦ Tilt: Up to 60 degrees as supplied; optional clamps allow tilting past 60 degrees, up to 180 degrees
♦ Tilt Window: Tilting works when the rotation center is between 27" and 46.5" above the floor
♦ Operation: Powered lift, powered drive
♦ Configuration: With forks, without clamps
NOTE: Picture shown with optional clamps.

Why Use This Product
When same-size boxes arrive on every kind of pallet and the rotator travels between stations all shift, you want powered travel, straddle legs and holders that never need adjusting. The SELFSR 1003-36 combines all three. The operator walks alongside instead of pushing, the legs run along the outside of the load so solid-deck and closed-bottom pallets work as well as open ones, and the holders are set to your box width so every box seats the same way. It lifts boxes to a 36" working height and tilts them toward the operator, so contents come to the worker instead of the worker leaning into the box.

Key Features Explained
♦ Powered drive and digital controller: A 24 V, 1.2 kW drive with electronically variable speed moves the loaded rotator between stations. The touchscreen controller lets you program stops, turning angle, speed and rotation, and logs operating time, cycles, overloads and battery status.
♦ Straddle legs in four widths: The legs pass on the outside of the pallet or base, so every pallet type works. Choose the inside width to clear your widest pallet; overall width is the inside width plus about 6.5", and Option D (49" to 56") reduces capacity to 1,760 pounds.
♦ Fixed box holders, four positions: Each holder mounts in one of four width positions, changed by loosening and retightening a screw. The 22" fork span covers box widths from 31.5" to 39.4", and the 27" span covers 39.4" to 47.2". Logitrans calls for two holders on each side for boxes between 1,100 and 2,200 pounds.
♦ Tilt angle and clamps: As supplied without clamps, tilt is limited to 60 degrees. Adding optional clamps lets you tilt past 60 degrees and fully empty boxes, with the 2,200 lb rating held even beyond 90 degrees. Tilt speed is adjustable, with smooth acceleration and deceleration at start and stop.
♦ Operator certification: As a powered industrial truck under OSHA 29 CFR 1910.178, every operator must be trained, evaluated and certified by the employer before use.

Best-Fit Use Cases
♦ Handling same-size boxes that arrive on solid-deck or closed-bottom pallets
♦ High-cycle production lines with long travel between stations
♦ Floor-to-table-height transfer at standard work surfaces
♦ Emptying same-size bins and crates with optional clamps

Ready to Order
Select the straddle width that clears your widest pallet, the 22" or 27" fork span, and tell us your box width so the holders are set correctly. Add a second set of holders if your boxes weigh over 1,100 pounds, and clamps if you need to tilt past 60 degrees or empty boxes completely. Wireless control and side support plates are also available. The SELFSR 1003 comes in 36", 47", 55", 63" and 75" lift heights. If your pallets are all open-entry, the fork-over SELFR 1003 costs less, and for short travel distances the manual-push ELFSR 1001 does the same lifting and tilting for less. Call 866-333-0728 and we’ll help you match the configuration to your boxes.

Is the SELFSR 1003-36 the Right Rotator for Your Boxes?
The SELFSR 1003 adds both of the line’s biggest upgrades, powered drive and straddle legs. Our buying guide compares all eight Logitrans box holder rotators so you can see whether you need both, or whether one upgrade covers your pallets and travel distances for less.

Button 1: Compare the SELFSR 1003-36 in Our Box Holder Rotator Buying Guide →
https://www.custommhs.com/guides/reel-lifts-rotators.html#s6

Button 2: Get a Fast Quote on the SELFSR 1003-36 →
https://www.custommhs.com/product-quote-and-freight-quote

Closing line: Tell us your box width, the heaviest box weight, the width of your widest pallet and how far the rotator travels, and we’ll spec it. No obligation, and our team personally reviews every quote; it isn’t generated automatically.

CustomMHS is an authorized distributor for all brands on this page. All purchases include the manufacturer’s factory warranty

Watch Product Video