Logitrans SELFSRA 1003-75 Fully Powered Rotator With Adjustable Box Holder and Straddle Legs

Quick Specs
♦ Model: SELFSRA 1003-75, straddle leg design
♦ Capacity: 2,200 pounds (1,760 pounds with Option D straddle width)
♦ Lifting Height: 75"
♦ Fork Span: 22" or 27" wide x 49" long forks
♦ Box Width Range: 31.5" to 48" (set by fork span, see below)
♦ Inside Straddle Width: A) 33" to 37", B) 37" to 44", C) 44" to 51", D) 49" to 56"
♦ Overall Height: 88"
♦ Tilt: Up to 60 degrees as supplied; optional clamps allow tilting past 60 degrees, up to 180 degrees
♦ Tilt Window: Tilting works when the rotation center is between 27" and 46.5" above the floor
♦ Operation: Powered lift, powered drive
♦ Configuration: With forks, without clamps
NOTE: Picture shows the fork over model with optional clamps.

Why Use This Product
When boxes arrive on every kind of pallet and the rotator travels between stations all shift, a manual-push, fork-over machine falls short on both counts. The SELFSRA 1003-75 combines powered travel drive with straddle legs. The operator walks alongside instead of pushing, and the legs run along the outside of the load, so solid-deck and closed-bottom pallets work as well as open ones. As the tallest model in the line, it lifts boxes to 75" to feed overhead conveyors, elevated discharge points and high staging levels, and it tilts boxes toward the operator within its tilt window. A handle-adjusted box holder fits boxes from 31.5" to 48" wide, cutting changeover time when box sizes vary through the day.

Key Features Explained
♦ Powered drive and digital controller: A 24 V, 1.2 kW drive with electronically variable speed moves the loaded rotator between stations. The touchscreen controller lets you program stops, turning angle, speed and rotation, and logs operating time, cycles, overloads and battery status.
♦ Straddle legs in four widths: The legs pass on the outside of the pallet or base, so every pallet type works. Choose the inside width to clear your widest pallet; overall width is the inside width plus about 6.5", and Option D (49" to 56") reduces capacity to 1,760 pounds.
♦ Handle-adjusted box holders and fork span: The handle sets the holders to the box, with no tools needed. The 22" fork span fits boxes about 31.5" to 39" wide, and the 27" span fits boxes about 39" to 47" wide.
♦ Lift height vs. tilt height: The full 75" is available for lifting and placing. Tilting works only with the rotation center between 27" and 46.5" off the floor. As supplied without clamps, tilt is limited to 60 degrees; optional clamps allow tilting past 60 degrees, with the 2,200 lb rating held even beyond 90 degrees.
♦ Operator certification: As a powered industrial truck under OSHA 29 CFR 1910.178, every operator must be trained, evaluated and certified by the employer before use.

Best-Fit Use Cases
♦ Handling boxes that arrive on solid-deck or closed-bottom pallets
♦ High-cycle operations with long travel between stations
♦ Feeding overhead conveyors and elevated discharge points
♦ Placing boxes onto the highest staging levels and mezzanine edges

Ready to Order
Select the straddle width that clears your widest pallet, the 22" or 27" fork span for your box widths, and clamps if you need to tilt past 60 degrees or empty boxes completely. Wireless control and side support plates are also available. At 88" overall, this model is taller than a standard 80" doorway, so check door and overhead clearances along every travel route. The SELFSRA 1003 comes in 36", 47", 55", 63" and 75" lift heights. If your pallets are all open-entry, the fork-over SELFRA 1003 costs less, and for short travel distances the manual-push ELFSRA 1001 does the same lifting and tilting for less. Call 866-333-0728 and we’ll help you match the configuration to your boxes.

Is the SELFSRA 1003-75 the Right Rotator for Your Boxes?
Picked the 75" model for its height? Lifting reaches the full 75", but tilting only works with the rotation center between 27" and 46.5" off the floor, so the extra height helps with placing, not tilting. Our buying guide compares all eight Logitrans box holder rotators so you can see whether you need both powered drive and straddle legs, or whether one upgrade covers your pallets and travel distances for less.

Button 1: Compare the SELFSRA 1003-75 in Our Box Holder Rotator Buying Guide →
https://www.custommhs.com/guides/reel-lifts-rotators.html#s6

Button 2: Get a Fast Quote on the SELFSRA 1003-75 →
https://www.custommhs.com/product-quote-and-freight-quote

Closing line: Tell us your box widths, the heaviest box weight, the width of your widest pallet and how far the rotator travels, and we’ll spec it. No obligation, and our team personally reviews every quote; it isn’t generated automatically.

CustomMHS is an authorized distributor for all brands on this page. All purchases include the manufacturer’s factory warranty

Watch Product Video