MECO Low Profile Extra Heavy Duty Self-Dumping Hoppers

MECO low profile extra heavy duty self-dumping hoppers are forklift hoppers with a reduced overall height, so the loading edge sits lower. That matters where clearance is tight, such as areas with limited overhead room. Two sizes are offered, 3 and 3-1/2 cubic yards, both 46" high and rated for 5,000 lb. For comparison, the 3 cubic yard hopper in the standard heavy duty line is 59-1/2" high. The trade-off is width, since the low profile hoppers are 85" and 98-1/2" wide.
Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.
| Model Number | Cubic Yards | Size | Capacity | Price | View Model |
|
3 yards
|
85" wide x 69-1/2" long x 46" high
|
5,000 pounds
|
$3,075.60
|
||
|
3-1/2 yards
|
98-1/2" wide x 69-1/2" long x 46" high
|
5,000 pounds
|
$3,098.04
|
The hopper body pivots on a frame that stays on the forks, and a latch holds it upright. The operator releases the latch from the seat, the body tips forward under the weight of the contents, and it relatches automatically when empty. A hopper needs weight to dump, so a nearly empty one may not tip.
Every hopper has two ratings, weight and volume. Full-hopper weight equals cubic yards times the material’s density in pounds per cubic yard. At 5,000 lb, a full 3-1/2 cubic yard hopper stays within its rating up to about 1,430 lb per cubic yard, which covers light material and metal scrap near 906 lb per cubic yard. Denser material such as stone or gravel at 2,632 lb per cubic yard reaches the limit at only about 1.9 cubic yards. Check the hopper’s own weight plus the contents against your truck’s capacity at the actual load center, confirm the fork pocket dimensions, and use the retaining chain every time.
Selecting the Right Hopper
◆ Choose low profile when you need a lower loading edge or must fit under limited clearance
◆ Choose 3 cubic yards or 3-1/2 cubic yards by volume and by the widest space you can serve
◆ Choose by material density, using full-hopper weight equals cubic yards times pounds per cubic yard
◆ Choose a size your forklift can lift at the hopper’s actual load center
◆ Confirm the fork pocket dimensions match your forks, and that the hopper width suits your aisles
◆ Choose a standard height heavy duty hopper instead if clearance is not a problem and you want a narrower body
To work through ratings, density, and low profile formats in more detail, read our hoppers and tilt trucks buying guide.
Where Commonly Used
MECO low profile hoppers are commonly used to collect scrap and waste at machines, conveyors, and work cells with limited clearance and carry it by forklift to dumpsters, compactors, and central collection points.
CustomMHS carries MECO self-dumping hoppers. All purchases include the manufacturer’s factory warranty.