Industrial Equipment Experts Since 1980 | Mon–Fri, 7 AM–6 PM ET
No bots. Real experts. 866-333-0728
Get a Fast Quote
Get a Fast Quote

MECO Series 1000 Medium Duty Single Sided Cantilever Uprights with Base

MECO Series 1000 Single Sided Cantilever Uprights | CustomMHS

A MECO Series 1000 single sided cantilever upright is the vertical column and floor base of a medium duty cantilever rack, punched to carry arms on one face only so the rack can stand with its back to a wall and be loaded from the front. Each upright ships with its base attached. Arms and brace sets are sold separately, and a working rack needs at least two uprights joined by a brace set: two uprights make a starter bay, and each additional upright with its brace set extends the run by one bay. Series 1000 is MECO’s lighter cantilever line, built for maintenance departments, tool rooms and shops that store pipe, bar stock, tubing, conduit and lumber in bundles.

 

Get a Fast Quote →Read our Buying Guide →

Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.

Model Number Upright Height Length of Base Compatible Arms Available Separately Price View Model
6'-0" high
33" long
12", 18" and 24"
$225.95
6'-0" high
45" long
30" and 36"
$242.00
6'-0" high
57" long
42" and 48"
$266.00
7'-0" high
33" long
12", 18" and 24"
$240.00
7'-0" high
45" long
30" and 36"
$258.00
7'-0" high
57" long
42" and 48"
$281.00
8'-0" high
33" long
12", 18" and 24"
$255.00
8'-0" high
45" long
30" and 36"
$273.00
8'-0" high
57" long
42" and 48"
$296.00
10'-0" high
33" long
12", 18" and 24"
$286.00
10'-0" high
45" long
30" and 36"
$304.00
10'-0" high
57" long
42" and 48"
$327.00
12-0" high
33" long
12", 18" and 48"
$330.00
12-0" high
45" long
30" and 36"
$348.00
12-0" high
57" long
42" and 48"
$373.00

Uprights come in 6, 7, 8, 10 and 12 foot heights, each in three base lengths, and the base length decides which arms the upright can carry. A 33 inch base takes 12, 18 and 24 inch arms, a 45 inch base takes 30 and 36 inch arms, and a 57 inch base takes 42 and 48 inch arms. The base must be longer for longer arms because the base is what keeps a loaded upright from tipping forward. The column is 3 inches wide by 6-1/4 inches deep and is punched on 3 inch centers, so arms adjust up or down in 3 inch steps. The standard finish is gray enamel.

Each upright has its own total capacity, separate from the rating of the arms hung on it, and that capacity falls as the upright gets taller and as the arms get longer. A 6 foot MU633 upright is rated 8,100 pounds with 12 inch arms and 5,500 pounds with 24 inch arms; a 12 foot MU1257 upright with 48 inch arms is rated 3,000 pounds. Ratings are for evenly distributed loads. MECO requires the base to be anchored to the floor through the holes provided and states that uprights must never be attached to walls, columns or other structures. Series 1000 uprights, arms and brace sets fit only other Series 1000 parts.


Product Lines:
The model number gives the height and base. In MU845, MU is the Series 1000 single sided upright, 8 is the height in feet, and 45 is the base length in inches. There are fifteen uprights: five heights (6, 7, 8, 10 and 12 feet) in three base lengths (33, 45 and 57 inches).

Capacity per upright in pounds, by arm length:

6 foot uprights (MU633, MU645, MU657): 8,100 with 12 inch arms, 6,600 with 18 inch, 5,500 with 24 inch, 4,700 with 30 inch, 4,100 with 36 inch, 3,700 with 42 inch, 3,300 with 48 inch.

7 foot uprights (MU733, MU745, MU757): 7,900, 6,400, 5,300, 4,600, 4,100, 3,700, 3,300.

8 foot uprights (MU833, MU845, MU857): 7,600, 6,300, 5,300, 4,500, 4,000, 3,600, 3,200.

10 foot uprights (MU1033, MU1045, MU1057): 7,100, 5,900, 5,000, 4,400, 3,800, 3,400, 3,100.

12 foot uprights (MU1233, MU1245, MU1257): 6,500, 5,400, 4,700, 4,100, 3,700, 3,300, 3,000.

Series 1000 arms are rated per arm: 1,000 pounds at 12 inches, 750 at 18, 600 at 24, 500 at 30, 400 at 36, 350 at 42 and 300 at 48 inches. Brace sets come as a set of two braces for 6 to 8 foot uprights and a set of three for 10 and 12 foot uprights, in lengths from 24 to 96 inches measured center to center of the uprights.


Selecting the Right Model:
◆ Choose the arm length first, from the depth of what you store, then take the base that goes with it: 33 inch base for 12 to 24 inch arms, 45 inch for 30 and 36 inch arms, 57 inch for 42 and 48 inch arms.
◆ Choose the height from the number of arm levels you need and your ceiling, remembering arms adjust on 3 inch centers and that taller uprights carry less.
◆ Check two capacities. The arms on one upright must each stay under the per arm rating, and their combined load must stay under the upright rating for that height and arm length.
◆ Count uprights by bays plus one. A run of four bays needs five uprights and four brace sets. Space uprights so the material does not sag between arms.
◆ Order arms and brace sets with the uprights. Neither is included, and both must be Series 1000.
◆ Plan to anchor every base to the floor. Anchors are not supplied by MECO, and the upright is not to be tied to a wall.
◆ Choose single sided uprights for a run against a wall. For a run in open floor loaded from both sides, use Series 1000 double sided uprights; arms must never be hung on the back of a single sided upright.

How much weight can a MECO Series 1000 single sided cantilever upright hold?
Between 3,000 and 8,100 pounds per upright, depending on the height and the arm length. A 6 foot upright carries 8,100 pounds with 12 inch arms and 3,300 pounds with 48 inch arms; an 8 foot upright carries 7,600 pounds with 12 inch arms and 3,200 pounds with 48 inch arms; a 12 foot upright carries 6,500 pounds with 12 inch arms and 3,000 pounds with 48 inch arms. That is the total for everything on the upright, evenly distributed, and each arm also has its own limit of 300 to 1,000 pounds by length. The CustomMHS cantilever racking guide explains why arm length sets capacity (guide section 1), the three capacities to check (section 2), why the base is set by the arm (section 3), single versus double sided (section 5), why parts do not cross series (section 6), and anchoring (section 9).

Where Commonly Used:
MECO Series 1000 single sided cantilever uprights are used in maintenance departments, tool rooms, fabrication shops, building supply stores and warehouses to build wall side racks for pipe, conduit, tubing, bar stock, trim and lumber.

CustomMHS carries the full line of MECO Series 1000 cantilever racking, backed by the manufacturer’s warranty.

Frequently Asked Questions (FAQs)

What is MECO Series 1,000 medium duty cantilever racking used for?

MECO Series 1,000 medium duty cantilever racking stores long, bulky items that do not fit well on standard pallet racks. It supports materials like lumber, pipe, tubing, bar stock, and other products with uneven lengths. The open-front design allows workers to load and unload items without front columns getting in the way. That makes it a practical storage system for warehouses, shops, and industrial facilities.

How does MECO Series 1,000 cantilever racking help a facility run better?

This cantilever racking helps facilities organize long materials in a safer and more efficient way. It keeps inventory off the floor, reducing clutter and opening up valuable working space. A better-organized system also helps workers find, pick, and restock items more quickly. Over time, that can improve flow in storage areas and support cleaner daily operations.

What are the key features of MECO Series 1,000 medium duty cantilever racking?

MECO Series 1,000 medium-duty cantilever racking uses upright columns and arms to support long loads with clear access from the front. Many layouts include starter units to begin a row and add-on units to expand storage capacity. The system can often be configured with straight arms or inclined arms, depending on the material being stored. This flexibility helps facilities match the rack layout to product size, weight, and handling needs.

What types of facilities commonly use medium duty cantilever racking?

Medium-duty cantilever racking is common in warehouses, manufacturing plants, distribution centers, and maintenance departments. It is also useful in lumber yards, metal shops, and backroom storage areas with long inventory. Facilities choose it when products are difficult to stack safely on shelves or pallets. It works especially well for operations that need fast access to materials of different lengths.

Why choose MECO Series 1,000 cantilever racking for long material storage?

MECO Series 1,000 cantilever racking gives facilities a structured way to store long inventory without wasting floor space. Its design enhances visibility, helping teams check stock levels and locate materials faster. It also allows facilities to build rows that fit current demand and expand later as storage needs change. For many operations, this creates a more orderly storage area and supports safer material handling.

Is the manufacturer’s warranty included with my purchase?

Yes. All products sold on CustomMHS.com include the original manufacturer’s warranty unless otherwise noted. Custom MHS is an authorized dealer for the brands we carry, which means your purchase is covered by the manufacturer's full factory warranty.

Do you offer bulk pricing or discounts on large orders?

Yes. Many products include automatic quantity price breaks. If you’re outfitting a facility or placing a larger order, email us for project pricing. We can often provide improved volume pricing and help coordinate logistics for staged deliveries or multi-location shipments. Contact: [email protected]

Why purchase from CustomMHS.com?

CustomMHS.com supports manufacturing and distribution operations that need equipment that fits right the first time. We specialize in storage and material handling, and we help you select the correct configuration up front to avoid errors that cause delays, reorders, and costly downtime. To make price comparisons simple and fair, we reference the manufacturer’s model number on our listings and quotes whenever available. That way, you can compare the exact same item across suppliers apples to apples, so you can verify you’re getting the best deal without guessing whether the specs match.