Industrial Equipment Experts Since 1980 | Mon–Fri, 7 AM–6 PM ET
No bots. Real experts. 866-333-0728
Get a Fast Quote
Get a Fast Quote

MECO Series 4000 Heavy Duty Cantilever Rack Starter and Add-On Units

MECO Series 4000 Cantilever Rack Starter and Add-On Units  MECO Series 4000 Cantilever Rack Starter and Add-On Units   MECO Series 4000 Cantilever Rack Starter and Add-On Units   MECO Series 4000 Cantilever Rack Starter and Add-On Units

A MECO Series 4000 cantilever rack starter unit is a complete heavy duty cantilever bay sold under one model number: 2 uprights with bases, 1 brace set 6 feet long and a matched set of straight arms. An add-on unit extends that bay by one more: it includes 1 upright with base, 1 brace set 6 feet long and half as many arms as the starter, and it connects to the last upright of the run. A run of four bays is one starter plus three add-ons. Series 4000 is MECO’s heavy duty line, with a column 4 inches wide by 9-1/2 inches deep, built for structural steel, heavy pipe, bar stock and full bundles of lumber.

 

Get a Fast Quote →Read our Buying Guide →

Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.

Model Number Rack Type Upright Height x Base Lenght No. of Arms / Capacity per Arm Price View Model
Single Sided (Starter)
8' tall, 37" base & 6' brace set
(8) 24" arms, 2,000 pounds
$1,585.00
Single Sided (Add-on)
8' tall, 37" base & 6' brace set
(4) 24" arms, 2,000 pounds
$835.00
Single Sided (Starter)
10' tall, 49" base & 6' brace set
(12) 36" arms, 1,200 pounds
$2,220.00
Single Sided (Add-on)
10' tall, 49" base & 6' brace set
(6) 36" arms, 1,200 pounds
$1,180.00
Single Sided (Starter)
12' tall, 61" base & 6' brace set
(16) 48" arms, 1,000 pounds
$2,798.00
Single Sided (Add-on)
102 tall, 61" base & 6' brace set
(8) 48" arms, 1,000 pounds
$1,470.00
Double Sided (Starter)
8' tall, 65" base & 6' brace set
(16) 24" arms, 2,000 pounds
$1,580.00
Double Sided (Add-on)
8' tall, 65" base & 6' brace set
(8) 24" arms, 2,000 pounds
$1,115.00
Double Sided (Starter)
10' tall, 82" base & 6' brace set
(24) 36" arms, 1,200 pounds
$3,160.00
Double Sided (Add-on)
10' tall, 82" base & 6' brace set
(12) 36" arms, 1,200 pounds
$1,645.00
Double Sided (Starter)
12' tall, 106" base & 6' brace set
(32) 48" arms, 1,000 pounds
$4,190.00
Double Sided (Add-on)
12' tall, 106" base & 6' brace set
(16) 48" arms, 1,000 pounds
$2,165.00

There are three sizes, each sold single sided or double sided. The 8 foot units carry 24 inch arms rated 2,000 pounds each on a 37 inch base (65 inch for double sided). The 10 foot units carry 36 inch arms rated 1,200 pounds each on a 49 inch base (82 inch for double sided). The 12 foot units carry 48 inch arms rated 1,000 pounds each on a 61 inch base (106 inch for double sided). The base grows with the arm because the base is what keeps a loaded upright from tipping forward. Every unit uses a 6 foot brace set, so uprights stand about 6 feet apart. Arm ratings are for evenly distributed loads.

Each upright also has a total rating that the arms on it cannot exceed together: 21,500 pounds on the 8 foot single sided unit, 15,800 pounds on the 10 foot and 12,500 pounds on the 12 foot, and twice those figures on the double sided units (43,000, 31,600 and 25,000 pounds). Single sided units stand with their back to a wall and load from the front; double sided units stand in open floor and load from both faces. Bases are anchored to the floor. Starters and add-ons must be the same height and type to go together, and Series 4000 parts are a separate system from Series 1000 and Series 2000.


Product Lines:

The model number tells you what you are buying. S is a starter and A is an add-on, D means double sided, U is the Series 4000 heavy duty upright, and the number is the height in feet. SU10 is a 10 foot single sided starter; ADU12 is a 12 foot double sided add-on.

Single sided starters: SU8 has 8 arms 24 inches long, SU10 has 12 arms 36 inches long, SU12 has 16 arms 48 inches long. Single sided add-ons: AU8 has 4 arms, AU10 has 6 arms, AU12 has 8 arms.

Double sided starters: SDU8 has 16 arms 24 inches long, SDU10 has 24 arms 36 inches long, SDU12 has 32 arms 48 inches long. Double sided add-ons: ADU8 has 8 arms, ADU10 has 12 arms, ADU12 has 16 arms.

That works out to 4 arm levels per upright face on the 8 foot units, 6 levels on the 10 foot units and 8 levels on the 12 foot units. All arms supplied are straight arms.


Selecting the Right Model:
◆ Pick the size from the depth and weight of your material. The 8 foot units have the shortest arms and the highest per arm rating (24 inches, 2,000 pounds); the 12 foot units have the longest arms and the lowest (48 inches, 1,000 pounds).
◆ Check the upright total as well as the arm rating. On an SU12, eight arms at 1,000 pounds each is 8,000 pounds, inside the 12,500 pound upright rating; on any unit, do not load past either number.
◆ Choose single sided for a run against a wall and double sided for a run in open floor with an aisle on both sides. A double sided base is 65 to 106 inches long, so allow for it in the floor plan.
◆ Buy one starter per run and one add-on for each additional bay, in the same height and type (SU10 with AU10, SDU12 with ADU12).
◆ Check that your material spans the uprights. Uprights sit about 6 feet apart, so stock shorter than that needs a shorter brace set, built from separate Series 4000 components.
◆ If you need inclined arms for pipe or other arm lengths, build the rack from individual Series 4000 uprights, brace sets and arms. Pre-configured units come with straight arms only.
◆ Plan the lift. These units are 8 to 12 feet tall and the top arm levels are loaded by forklift or side loader, so confirm lift height and aisle width before ordering.

How much weight does a MECO Series 4000 cantilever rack hold?
Per arm, 2,000 pounds on the 8 foot units with 24 inch arms, 1,200 pounds on the 10 foot units with 36 inch arms, and 1,000 pounds on the 12 foot units with 48 inch arms. Per upright, the total is 21,500 pounds at 8 feet, 15,800 pounds at 10 feet and 12,500 pounds at 12 feet for single sided units, and 43,000, 31,600 and 25,000 pounds for double sided units. Both limits apply: no arm over its rating, and no upright over its total, with loads evenly distributed. The CustomMHS cantilever racking guide explains why arm length sets capacity (guide section 1), the three capacities to check (section 2), why the base is set by the arm (section 3), why parts do not cross series (section 6), how starter and add-on units work (section 7), and anchoring (section 9).

Where Commonly Used:
MECO Series 4000 cantilever starter and add-on units are used in steel service centers, fabrication shops, lumber yards, pipe and tubing distributors and manufacturing plants to store structural steel, heavy pipe, bar stock and bundled lumber on forklift loaded arms.

CustomMHS carries the full line of MECO Series 4000 cantilever racking, backed by the manufacturer’s warranty.

Frequently Asked Questions (FAQs)

What are MECO Series 4000 Cantilever Rack Starter and Add-On Units?

MECO Series 4000 Cantilever Rack Starter and Add-On Units are heavy-duty industrial storage systems for long and bulky materials. A starter unit creates the first complete rack bay with two uprights, straight arms, and brace sets. Add-on units connect to starter units, allowing your storage system to grow as needed. These cantilever rack units are available in 8 ft, 10 ft, and 12 ft upright heights. They help facilities organize materials that do not fit well on standard shelving or pallet rack.

How does cantilever rack help improve facility organization?

Cantilever rack helps keep long materials stored in clear, designated locations. This reduces floor clutter and makes products easier to find during daily operations. Materials like pipe, tubing, lumber, conduit, and bar stock can be separated by size or type. The open-front design allows employees to access materials without having to work around front columns. A better organization can also reduce damage caused by stacking materials on the floor.

What are the key features of the MECO Series 4000 Cantilever Rack system?

The MECO Series 4000 system includes starter and add-on units for flexible rack layouts. Starter units include two uprights, straight arms, and brace sets for one complete storage bay. Add-on units allow you to extend the rack without buying another full starter section. Upright heights of 8 ft, 10 ft, and 12 ft give you options for different storage areas. The system is designed for normal heavy-duty industrial storage requirements.

What materials are commonly stored on Series 4000 Cantilever Rack?

The Series 4000 Cantilever Rack is commonly used for long, bulky, or irregular materials. Typical items include lumber, pipe, tubing, conduit, bar stock, trim, panels, and structural steel. These products can be difficult to store on standard pallet racks or shelving. The cantilever design keeps the front of the rack open for easier loading and unloading. This makes it useful in warehouses, fabrication shops, supply houses, and lumber yards.

How can starter and add-on units help with future storage needs?

Starter and add-on units make it easier to build a storage system in stages. You can begin with a starter unit, then add more bays as inventory grows. This helps match the rack layout to your floor space, ceiling height, and material sizes. It also supports better use of vertical and horizontal storage space. For growing operations, this layout can improve material flow without replacing the entire system.

Is the manufacturer’s warranty included with my purchase?

Yes. All products sold on CustomMHS.com include the original manufacturer’s warranty unless otherwise noted. Custom MHS is an authorized dealer for the brands we carry, which means your purchase is covered by the manufacturer's full factory warranty.

Do you offer bulk pricing or discounts on large orders?

Yes. Many products include automatic quantity price breaks. If you’re outfitting a facility or placing a larger order, email us for project pricing. We can often provide improved volume pricing and help coordinate logistics for staged deliveries or multi-location shipments. Contact: [email protected]

Why purchase from CustomMHS.com?

CustomMHS.com supports manufacturing and distribution operations that need equipment that fits right the first time. We specialize in storage and material handling, and we help you select the correct configuration up front to avoid errors that cause delays, reorders, and costly downtime. To make price comparisons simple and fair, we reference the manufacturer’s model number on our listings and quotes whenever available. That way, you can compare the exact same item across suppliers apples to apples, so you can verify you’re getting the best deal without guessing whether the specs match.