MECO Series 90 Extra Heavy Duty Self-Dumping Hoppers

MECO Series 90 extra heavy duty self-dumping hoppers are compact forklift hoppers rated for 6,000 lb, built for dense scrap and bulk material. Four sizes run from 1/4 to 1-1/2 cubic yards, which is deliberately small for the rating. The buying guide lists Series 90 with a reinforced 0.25" base. The hopper body pivots on a frame that stays on the forks, and a latch holds it upright. The operator releases the latch from the seat, the body tips forward under the weight of the contents, and it relatches automatically when empty.

Get a Fast Quote →Read the Buying Guide →

Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.

Model Number	Cubic Volume	Size	Capacity	Price	View Model
SDHX025-90	1/4 yards	32" wide x 55" long x 22" high	6,000 pounds	$1,132.31	View Model
SDHX050-90	1/2 yards	32" wide x 55" long x 29" high	6,000 pounds	$1,280.23	View Model
SDHX100-90	1 yards	51" wide x 55" long x 29" high	6,000 pounds	$1,509.75	View Model
SDHX150-90	1-1/2 yards	51" wide x 55" long x 41" high	6,000 pounds	$1,825.98	View Model

Small volume with a high weight rating is the point. Full-hopper weight equals cubic yards times the material’s density in pounds per cubic yard. Dense material reaches a weight limit long before a hopper fills, which is why castings, machining turnings, aggregate, and wet scrap call for strength instead of volume. Even a completely full 1-1/2 cubic yard hopper of stone or gravel at 2,632 lb per cubic yard weighs about 3,950 lb, well inside the 6,000 lb rating, while the same hopper full of metal scrap at 906 lb per cubic yard weighs about 1,360 lb.

The forklift is usually the limit. A hopper’s weight sits farther forward than a pallet’s, so check the hopper’s own weight plus the contents against the truck’s capacity at the actual load center, not the data plate figure. A full hopper of dense material can exceed the truck’s derated capacity while looking like an ordinary lift. Under OSHA 1910.178, tilting forward with the load elevated is prohibited except to pick up a load or deposit it over a rack or stack, and an unattended truck must have its load engaging means fully lowered. Dump with the hopper positioned over the receptacle, and use the retaining chain every time. Confirm the fork pocket dimensions match your forks.

Selecting the Right Hopper
◆ Choose Series 90 for dense material like castings, turnings, aggregate, and wet scrap, where weight is the limit
◆ Choose a size by the volume you collect between dumps, from 1/4 to 1-1/2 cubic yards
◆ Choose a size your forklift can lift at the hopper’s actual load center, with the contents at full weight
◆ Confirm the fork pocket dimensions match your forks
◆ Choose a size that fits the space where you will dump, including the receptacle height
◆ Weigh a sample of known volume if your material is unusual

To work through ratings, density, and duty tiers in more detail, read our hoppers and tilt trucks buying guide.

Where Commonly Used
MECO Series 90 hoppers are commonly used to collect dense scrap and bulk waste at the source and carry it by forklift to dumpsters, compactors, and central waste areas.

CustomMHS carries MECO self-dumping hoppers. All purchases include the manufacturer’s factory warranty.

Frequently Asked Questions (FAQs)

What are MECO Series 90 self-dumping hoppers used for?

MECO Series 90 extra heavy-duty self-dumping hoppers are designed for collecting and dumping dense scrap, heavy debris, and bulk industrial waste using a forklift. They provide a rugged solution for facilities that generate high-weight scrap loads on a daily basis. These hoppers help improve cleanup efficiency and reduce manual material handling.

What makes the Series 90 hopper “extra heavy duty”?

Series 90 hoppers feature reinforced steel construction built specifically for dense scrap and demanding industrial environments. They are engineered to withstand heavier loads, repeated dumping cycles, and harsh shop-floor use. This makes them ideal for high-volume operations where standard hoppers may fail prematurely.

How does a forklift self-dumping hopper operate?

The hopper is lifted with a forklift and automatically dumps when the release mechanism is activated. After unloading, it returns to the locked position as it is lowered back to the ground. This allows one operator to handle bulk waste disposal safely without manual dumping.

What types of materials are best suited for Series 90 dump hoppers?

These hoppers are commonly used for dense scrap metal, machining waste, industrial debris, recyclables, and heavy production byproducts. They are built for environments where scrap loads are compact, heavy, and frequent. The extra-duty design ensures reliable handling under extreme conditions.

How do Series 90 hoppers improve industrial waste handling efficiency?

Series 90 hoppers allow facilities to collect and remove large scrap loads in fewer trips, reducing labor and downtime. Forklift-operated dumping speeds up disposal and keeps production areas cleaner. Efficient waste handling improves workflow consistency and overall facility safety.

Where are MECO Series 90 self-dumping hoppers most commonly used?

These hoppers are widely used in metal fabrication, heavy manufacturing, machining operations, recycling facilities, and industrial warehouses. They are ideal anywhere dense scrap and bulk waste must be managed regularly. Any operation needing maximum durability in forklift dumping equipment can benefit from Series 90 hoppers.

Is the manufacturer’s warranty included with my purchase?

Yes. All products sold on CustomMHS.com include the original manufacturer’s warranty unless otherwise noted. Custom MHS is an authorized dealer for the brands we carry, which means your purchase is covered by the manufacturer's full factory warranty.

Do you ship nationwide?

Yes. We ship throughout the United States and Canada using trusted freight partners experienced in handling industrial equipment. Our team coordinates shipping details to ensure safe and efficient delivery.