Industrial Cabinets and Modular Drawer Systems
Industrial storage cabinets come in a range of configurations built around how you need to access and protect what's inside, from fully enclosed security to visible inventory checks to ventilated airflow for damp gear. This page groups the six core cabinet styles CustomMHS carries, so you can start with your general storage need and drill down to the right configuration.
| Modular Drawer Cabinets High-density drawer storage for tools, parts, and dies. |
|
Rousseau R-Series Cabinets
|
![]() Rousseau L-Series Cabinets Configurable layouts for organizing lighter tools and parts, with each drawer rated to hold up to 100 pounds.
|
![]()
|
![]() Storage Cabinets with Drawers
|
| Storage Cabinets Lockable steel cabinets with shelves, bins or dividers. |
|
Storage Cabinets
|
![]() Visual Cabinets
|
![]() Ventilated Storage Cabinets
|
![]() Combination Storage Cabinets
|
||||
![]() Storage Cabinets with Bins
|
![]() Wardrobe Storage Cabinets
|
![]() Emergency Response Cabinet
|
![]() Industrial Divider Storage Cabinets
|
||||
![]() Industrial Stainless Steel Cabinets
|
|
||||||
| Safety & Hazmat Storage |
Flammable Safety Storage Cabinets
|
Cylinder Vertical & Horizontal Cages
|
| Specialty Cabinets |
![]() Stationary & Mobile Computer Cabinets
|
![]() Standing Shipping & Receiving Desk
|
CNC Tool Storage
|
|
| Incredible Selection at Low Prices. |
A cabinet usually replaces something that is not working: open shelving where things get lost, a bench covered in tooling, or a corner where spares pile up. Your guide measures the value in four currencies: floor space, search time, shrinkage, and compliance. This page groups cabinets by the job they do: modular drawer cabinets for tools and small valuable parts, shelf cabinets for bulk supplies and equipment, safety cabinets for flammables and gas cylinders, specialty cabinets, and small parts cabinets.
Drawer rating splits the modular market. Rousseau R-Series drawers carry 400 lb each on full-extension slides, with a lifetime warranty on the rolling mechanism, and the L-Series carries 100 lb per drawer. Weigh a representative drawer load before you choose, since dense metal tooling reaches 400 lb faster than people expect. Modular drawers earn their cost on small, valuable, frequently retrieved items and are the wrong answer for bulky or low-value stock, which belongs on shelving.
For enclosed cabinets, an all-welded one-piece body is stiffer than a knock-down, and a lower gauge number is thicker steel. Flammable liquids need a cabinet built to OSHA 29 CFR 1910.106(d)(3): at least 18 gauge steel, double walls with a 1-1/2 in air space, a three-point lock and a door sill raised 2 in, with no more than 60 gallons of Category 1, 2 or 3 liquids or 120 gallons of Category 4. Under OSHA 1910.253(b)(4), oxygen cylinders must be 20 ft from fuel gas and combustibles, or behind a noncombustible barrier at least 5 ft high with a one-half hour fire rating. A standard storage cabinet is not a substitute for either.
Product Lines
Rousseau R-Series and L-Series modular drawer cabinets and drawer carts, Strong Hold drawer cabinets, storage cabinets in standard, visual, ventilated, combination, bin, wardrobe, divider and stainless steel styles, emergency response cabinets, lockers, flammable safety cabinets, cylinder cages, computer cabinets, a shipping and receiving desk, Rousseau NCM-Series CNC tool storage cabinets, and Akro-Mils small parts cabinets.
Selecting the Right Model
◆ Contents: choose modular drawer cabinets for small, valuable, frequently retrieved items, and shelf cabinets for bulky or low-value stock
◆ Drawer rating, choose 400 lb per drawer (Rousseau R-Series) for dense tooling and 100 lb (L-Series) for hand tools and small parts, based on a weighed drawer load
◆ Mobility, choose a modular drawer cart where tooling has to travel to the machine, and remember a cart cannot be anchored
◆ Visibility, choose a visual cabinet where contents should be identified without opening the door
◆ Storage mix, choose a combination cabinet for shelving, drawers and bins in one unit, and a bin or divider cabinet for sorting small parts
◆ Environment, choose a ventilated cabinet for damp gear and a stainless steel cabinet for food, pharma and lab areas, and ask for the stainless grade
◆ Regulated storage, choose a flammable safety cabinet for combustible liquids and a ventilated, lockable cage for gas cylinders
◆ Machine shops, choose a Rousseau NCM-Series CNC cabinet with polycarbonate doors to identify tooling at a glance, or solid doors where dust and coolant mist are the bigger problem
◆ Locks and placement, decide the keying scheme before ordering, anchor tall cabinets, and load heavy drawers low
Cabinets Buying Guide
Find the row that matches your storage problem.
See choosing by application in the Cabinets & Modular Drawer Storage Buyer’s Guide
Where Commonly Used
Industrial cabinets are commonly used in tool cribs, maintenance rooms, machine shops, production floors and warehouses, with specialty units for flammables, gas cylinders, electronics, and food, pharma, and lab areas.
CustomMHS carries Rousseau, Hallowell, Little Giant, Strong Hold, Jamco, Pucel, Parent Metal, and Akro-Mils cabinets and modular drawer systems. All purchases include the manufacturer’s factory warranty.



















