Industrial Equipment Experts Since 1980 | Mon–Fri, 7 AM–6 PM ET
No bots. Real experts. 866-333-0728
Get a Fast Quote
Get a Fast Quote

Presto SRT Series Stationary Container Tilters

Presto SRT Series Stationary Container Tilters

A stationary container tilter is a floor mounted hydraulic unit that tips a bin, tote or wire basket toward the operator so parts at the bottom can be reached without bending in. The Presto SRT Series tilts a container to any angle from 0 to 89 degrees. Its fork channels lower to 3/8" above the floor, so a loaded container can be set on by a hand pallet truck, stacker or forklift.

Get a Fast Quote →Read our Buying Guide → 

Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.

Model Number Capacity Size: L x W Lifting Speed Quantity Discounts View Model
2,000 pounds
33 wide x 58" long
23 seconds
$8,718.24
4,000 pounds
33 wide x 58" long
24 seconds
$9,362.02

The CustomMHS lift table guide gives seven inches as the limit for pallet jack loading. At 3/8", the SRT forks are far below that limit. Presto rates the load center at up to 20" from the tilt platform, and the unit is designed to be lagged to the floor.

Each SRT tilter comes with an internal 1 hp, 115 V single phase power unit on a 10 ft cord, a push button hand-held control with magnetic backing, flexible safety toe guards on the forks and a flow control that sets the lowering speed. Presto offers an optional foot control and custom designs. Presto’s manual covers the welded structural frame for five years, other components for two years and labor for 30 days.

Product Lines
The SRT Series has two models that share the same 33" x 58" footprint, 40" long forks, 3/8" lowered height and 89 degree tilt. They differ in capacity: the SRT20 is rated 2,000 lb and the SRT40 is rated 4,000 lb.

Selecting the Right Model
◆ SRT20 (2,000 lb): 33" x 58" footprint, 40" forks, 3/8" lowered, 0 to 89 degree tilt, 23 second tilt.
◆ SRT40 (4,000 lb): 33" x 58" footprint, 40" forks, 3/8" lowered, 0 to 89 degree tilt, 24 second tilt.
◆ Capacity: Choose the SRT40 when the loaded container weighs more than 2,000 lb or the load center is near the 20" limit.

Can a hand pallet truck load a Presto SRT tilter?
Yes. The forks lower to 3/8", far under the seven inch limit for pallet jack loading.
See how lowered height controls loading in the CustomMHS lift table guide.


Where Commonly Used
Stationary container tilters are commonly used at packing, assembly and machine feeding stations where parts are picked from bins, totes and wire baskets all day.

CustomMHS carries the full line of Presto SRT Series stationary container tilters, backed by the manufacturer’s warranty.