Industrial Equipment Experts Since 1980 | Mon–Fri, 7 AM–6 PM ET
No bots. Real experts. 866-333-0728
Get a Fast Quote
Get a Fast Quote

Presto Lifts TT Series Fixed Height Tilters

Presto Lifts TT Series Fixed Height Tilters

A fixed height tilter is a hydraulic tilt top that tips a bin, tote or container toward the operator so parts at the bottom can be reached without bending in. It does not raise or lower the load. The Presto TT Series tilts 30, 45 or 60 degrees depending on the model and is rated from 1,000 to 6,000 lb. Presto says the tilt tops ca

Get a Fast Quote →Read our Buying Guide → 

Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.

Model Number Platform Size Degree of Tilt Capacity Price View Model
24" wide x 36" long
30
1,000 pounds
$6,590.54
24" wide x 36" long
30
1,500 pounds
$6,961.52
24" wide x 36" long
30
2,000 pounds
$8,183.62
24" wide x 36" long
30
4,000 pounds
$9,165.58
24" wide x 36" long
30
6,000 pounds
$10,234.96
24" wide x 36" long
45
1,000 pounds
$6,786.92
24" wide x 36" long
45
1,500 pounds
$7,157.89
24" wide x 36" long
45
2,000 pounds
$8,467.29
24" wide x 36" long
45
4,000 pounds
$9,362.02
24" wide x 36" long
45
6,000 pounds
$10,496.81
24" wide x 36" long
60
1,000 pounds
$6,961.52
24" wide x 36" long
60
1,500 pounds
$7,332.51

 

Every TT tilter has a 24" x 36" platform with an 8" lip to hold the container, and Presto offers lips up to 24" and custom platforms up to 36" x 48" or 50" x 50" depending on the model. An internal 1/2 hp, 115 V single phase power unit drives the tilt, and a hand-held pendant control is standard. The TT60 models have powered down cylinders.

Because a fixed height tilter sits on the floor, a bench or a stand, the container is set onto it rather than rolled on. Its 6-1/2" or 7-1/2" platform height matters less than on a lift table, but if a pallet jack will set the load, see the loading rule in the CustomMHS lift table guide.

Product Lines
The TT Series has 12 models in three tilt angles. The TT30 series tilts 30 degrees and the TT45 series tilts 45 degrees, each in 1,000, 1,500, 2,000, 4,000 and 6,000 lb. The TT60 series tilts 60 degrees in 1,000 and 1,500 lb. The 1,000 and 1,500 lb models sit on a 24" x 30" base at 6-1/2" high, and the 2,000 to 6,000 lb models sit on a 24" x 36" base at 7-1/2" high.

Selecting the Right Model
◆ TT30 series (30 degree tilt): TT30-10 (1,000 lb) and TT30-15 (1,500 lb) tilt in 15 seconds. TT30-20 (2,000 lb) in 10 seconds, TT30-40 (4,000 lb) in 11 seconds and TT30-60 (6,000 lb) in 14 seconds.
◆ TT45 series (45 degree tilt): TT45-10 (1,000 lb) and TT45-15 (1,500 lb) tilt in 22 seconds. TT45-20 (2,000 lb) in 15 seconds, TT45-40 (4,000 lb) in 16 seconds and TT45-60 (6,000 lb) in 20 seconds.
◆ TT60 series (60 degree tilt): TT60-10 (1,000 lb) tilts in 30 seconds and TT60-15 (1,500 lb) in 50 seconds, both with powered down cylinders.
◆ Tilt angle: Choose 30 degrees for shallow bins and tall loads that could shift, 45 degrees for most totes, and 60 degrees when the operator must reach the far bottom corner of a deep container.

Which tilt angle do you need?
The deeper the container, the more tilt it takes to reach the bottom, and the TT Series offers 30, 45 and 60 degrees at the same 24" x 36" platform.
See how lowered height controls loading in the CustomMHS lift table guide for the loading rule that applies if a pallet jack will set the container.


Where Commonly Used
Fixed height tilters are commonly used at assembly, packing and machine feeding stations where parts are picked from bins and containers of odd shapes and sizes.

CustomMHS carries the full line of Presto Lifts TT Series fixed height tilters, backed by the manufacturer’s warranty.