Pro-Line Industrial Maple Top Transfer Pop-Up Ball Workbench

Pro-Line Industrial Maple Top Transfer Pop-Up Ball Workbench

The Pro-Line Industrial Maple Top Transfer Workbench assists in the transfer and positioning of materials during production. Solid maple work surfaces are 1.75 inches thick, with both front and rear edges eased for worker comfort. Ball transfers raise 0.250 inches above the surface when a pneumatic toggle switch is activated, allowing work in process to be slid onto the station. Once the load is in position, the ball transfers retract, and the load is stabilized. Standard workbenches require 80 PSI of shop air to operate.

Retractable ball transfer stations are available with half- or full-length surface coverage. The modular design allows for the mounting of optional accessories. Heavy-duty 2-inch square tubular legs offer stability, and leg extenders allow the surface height to be set from 30" to 36". Each bench is furnished with a top, legs, and pop-up balls.

Ball pattern and density options: Standard Density (SD) uses a 6" x 6" pattern, while High Density (HD) uses a 3" x 6" pattern. Half Coverage (HC) allocates retracting balls to one half of the work surface, while Full Coverage (FC) populates the entire surface with balls.

Selection Guide:

♦ Size 48"L, 30"D: available in Half Coverage Standard Density (RT483030-HC-SD-M), Full Coverage Standard Density (RT483030-FC-SD-M), Half Coverage High Density (RT483030-HC-HD-M), or Full Coverage High Density (RT483030-FC-HD-M)
♦ Size 48"L, 36"D: available in Half Coverage Standard Density (RT483630-HC-SD-M), Full Coverage Standard Density (RT483630-FC-SD-M), Half Coverage High Density (RT483630-HC-HD-M), or Full Coverage High Density (RT483630-FC-HD-M)
♦ Size 60"L, 30"D: available in Half Coverage Standard Density (RT603030-HC-SD-M), Full Coverage Standard Density (RT603030-FC-SD-M), Half Coverage High Density (RT603030-HC-HD-M), or Full Coverage High Density (RT603030-FC-HD-M)
♦ Size 60"L, 36"D: available in Half Coverage Standard Density (RT603630-HC-SD-M), Full Coverage Standard Density (RT603630-FC-SD-M), Half Coverage High Density (RT603630-HC-HD-M), or Full Coverage High Density (RT603630-FC-HD-M)
♦ Size 72"L, 30"D: available in Half Coverage Standard Density (RT723030-HC-SD-M), Full Coverage Standard Density (RT723030-FC-SD-M), Half Coverage High Density (RT723030-HC-HD-M), or Full Coverage High Density (RT723030-FC-HD-M)
♦ Size 72"L, 36"D: available in Half Coverage Standard Density (RT723630-HC-SD-M), Full Coverage Standard Density (RT723630-FC-SD-M), Half Coverage High Density (RT723630-HC-HD-M), or Full Coverage High Density (RT723630-FC-HD-M)

Selecting the Right Model:

♦ Footprint, from 48"L x 30"D up to 72"L x 36"D, select based on the surface area needed to transfer and position work in process.
♦ Ball density, standard density (6" x 6") suits general transfer needs, while high density (3" x 6") provides closer ball spacing for smaller or less stable loads.
♦ Coverage, half coverage suits applications where only part of the surface needs retracting balls, while full coverage populates the entire surface for maximum transfer flexibility.

Where Commonly Used:

♦ Heavy Parts Transfer: the solid maple surface withstands heavy impact while the ball transfer system moves parts into position.
♦ Repair and Maintenance Stations, teams use the maple top for durability alongside the ball transfer surface for easy load positioning.
♦ High-Volume Transfer Stations, with full coverage and high-density configurations, support frequent, high-throughput material transfer.
♦ Modular Production Cells: The accessory-mounting design allows the station to be configured for specific transfer and positioning tasks.

CustomMHS carries the full line of Pro-Line transfer workbenches, backed by the manufacturer's warranty.