Industrial Equipment Experts Since 1980 | Mon–Fri, 7 AM–6 PM ET
No bots. Real experts. 866-333-0728
Get a Fast Quote
Get a Fast Quote

Husky 42x144 Starter Pallet Racking Section, SU29 13 Gauge Frame

Husky 42x144 Starter Pallet Rack Section | SU29 Upright Frame

A Husky 42x144 SU29 starter pallet racking section is a complete, freestanding bay of Husky teardrop pallet rack built on two SU2942144 welded upright frames measuring 42 inches deep by 144 inches high, with two or three pairs of Husky IBX, IBN or IBH step beams locked in place by Bowlock clips. The SU29 frame is the heaviest of the three 42x144 frames CustomMHS sells. Its columns are 3 inch by 3 inch steel tubing in 13 gauge, one gauge thicker than the 14 gauge 3 by 3 inch IU24 column and a different shape entirely from the 3 by 1-5/8 inch IU18 column. Each frame stands on a 5 inch by 7 inch by 3/4 inch base plate, far larger than the 4 by 4-1/4 inch footplate on the IU series, which spreads the column load over more floor and gives the anchors more steel to hold.

Starter unit, stand alone or start a rowUS made high strength steel, ASTM A1011-GR55 Usually ships in 3-4 daysGreen uprights and orange beams

Get a Fast Quote →Read our Buying Guide →

Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.

Model Number Unit Type Dimensions Beam Cap/Pair Price 1-9 View Model
2 Upper Levels, No Decking
42"D x 144"H x 48"W
7,383 lbs.
$680.94
3 Upper Levels, Wire Decking
42"D x 144"H x 48"W
7,383 lbs.
$873.68
3 Upper Levels, No Decking
42"D x 144"H x 48"W
7,383 lbs.
$749.85
2 Upper Levels, Wire Decking
42"D x 144"H x 96"W
4,044 lbs.
$935.60
2 Upper Levels, No Decking
42"D x 144"H x 96"W
4,044 lbs.
$772.89
3 Upper Levels, Wire Decking
42"D x 144"H x 96"W
4,044 lbs.
$1,133.65
3 Upper Levels, No Decking
42"D x 144"H x 96"W
4,044 lbs.
$887.90
2 Upper Levels, Wire Decking
42"D x 144"H x 96"W
5,047 lbs.
$942.69
2 Upper Levels, No Decking
42"D x 144"H x 96"W
5,047 lbs.
$779.96
3 Upper Levels, Wire Decking
42"D x 144"H x 96"W
5,047 lbs.
$1,062.92
3 Upper Levels, No Decking
42"D x 144"H x 96"W
5,047 lbs.
$900.19
2 Upper Levels, Wire Decking
42"D x 144"H x 96"W
6,111 lbs.
$949.73
2 Upper Levels, No Decking
42"D x 144"H x 96"W
6,111 lbs.
$787.05
3 Upper Levels, Wire Decking
42"D x 144"H x 96"W
6,111 lbs.
$1,075.28
3 Upper Levels, No Decking
42"D x 144"H x 96"W
6,111 lbs.
$912.59
2 Upper Levels, Wire Deckin
42"D x 144"H x 108"W
5,000 lbs.
$986.87
2 Upper Levels, No Decking
42"D x 144"H x 108"W
5,000 lbs.
$809.99
3 Upper Levels, Wire Decking
42"D x 144"H x 108"W
5,000 lbs.
$1,209.66
3 Upper Levels, No Decking
42"D x 144"H x 108"W
5,000 lbs.
$947.95
2 Upper Levels, Wire Decking
42"D x 144"H x 108"W
8,873 lbs.
$1,050.53
2 Upper Levels, No Decking
42"D x 144"H x 108"W
8.873 lbs.
$877.23
3 Upper Levels, Wire Decking
42"D x 144"H x 108"W
8,873 lbs.
$1,308.72
3 Upper Levels, No Decking
42"D x 144"H x 108"W
8,873 lbs.
$1,046.97
2 Upper Levels, Wire Decking
42"D x 144"H x 120"W
4,062 lbs.
$1,041.69
2 Upper Levels, No Decking
42"D x 144"H x 120"W
4,062 lbs.
$834.74
3 Upper Levels, Wire Decking
42"D x 144"H x 120"W
4,062 lbs.
$1,292.85
3 Upper Levels, No Decking
42"D x 144"H x 120"W
4,062 lbs.
$981.52
2 Upper Levels, Wire Decking
42"D x 144"H x 144"W
3,000 lbs.
$1,128.35
2 Upper Levels, No Decking
42"D x 144"H x 144"W
3,000 lbs.
$882.50
3 Upper Levels, Wire Decking
42"D x 144"H x 144"W
3,000 lbs.
$1,299.85
3 Upper Levels, No Decking
42"D x 144"H x 144"W
3,000 lbs.
$1,054.07
2 Upper Levels, Wire Decking
42"D x 144"H x 144"W
5,569 lbs.
$1,215.01
2 Upper Levels, No Decking
42"D x 144"H x 144"W
5,569 lbs.
$969.15
3 Upper Levels, Wire Decking
42"D x 144"H x 144"W
5,569 lbs.
$1,429.03
3 Upper Levels, No Decking
42"D x 144"H x 144"W
5,569 lbs.
$1,183.16
2 Upper Levels, Wire Decking
42"D x 144"H x 144"W
7,820 lbs.
$1,296.38
2 Upper Levels, No Decking
42"D x 144"H x 144"W
7,820 lbs.
$1,050.53
3 Upper Levels, Wire Decking
42"D x 144"H x 144"W
7,820 lbs.
$1,579.37
3 Upper Levels, No Decking
42"D x 144"H x 144"W
7,820 lbs.
$1,306.95

A starter section is the first bay in a row of pallet rack. It stands on its own, and every bay added after it shares one of its frames, which is why add-on sections ship with one frame instead of two. Each upright adds 3 inches to the overall row length. The 42 inch frame depth is sized for standard 48 inch GMA pallets loaded 42 inches deep so the pallet overhangs the front and rear beams by three inches on each side. Teardrop punching on 2 inch centers lets beam levels adjust in 2 inch steps. Frames are finished green and beams orange, the Husky standard.

The beams on an SU29 section are the same Husky step beams used on IU18 and IU24 sections, so the per pair beam capacities in the table are unchanged. The thicker frame is there to carry more total weight in the bay and to stand up better to forklift contact at the base, which is where most rack damage happens. Wire decking lays across the two beams of a level to support cartons, drums and odd-sized loads, and lets sprinkler water pass through. On the decked models each deck measures 42 inches deep by 52 inches long and is rated 2,600 pounds, with two decks per level on a 108 inch bay. Sections are offered in 48, 96, 108, 120 and 144 inch bay widths with two or three beam levels: a 96 inch bay holds two 40 inch wide pallets, a 108 inch bay holds two 48 inch pallets, a 144 inch bay holds three 40 inch pallets.


Product Lines:

All sections in this category share the Husky SU2942144 frame, so the model number changes only by beam, level count and decking. Read SU2942144-IBN55108-3SW left to right: SU29 marks the 3 by 3 inch 13 gauge welded upright, 42144 is the 42 inch deep by 144 inch high frame, IBN55108 is a 5-1/2 inch tall step beam 108 inches long, 3S means three beam levels in a starter section (2S means two), and a W on the end means wire decking is included. IBX beams are the standard Husky step beam, IBN beams are the heavier 5-1/2 inch profile, and the IBH60144 is a 6 inch beam for the heaviest 144 inch spans.

Per pair beam capacities by bay width: 48 inch bays use the IBX30048 beam rated 7,383 pounds. 96 inch bays use the IBX35096 at 4,044 pounds, the IBX39096 at 5,047 pounds, or the IBX43096 at 6,111 pounds. 108 inch bays use the IBX43108 at 5,000 pounds or the IBN55108 at 8,873 pounds. 120 inch bays use the IBX43120 at 4,062 pounds. 144 inch bays use the IBX43144 at 3,000 pounds, the IBN55144 at 5,569 pounds, or the IBH60144 at 7,820 pounds. Every beam is offered in two or three levels, each with wire decking (SW) or without (S).


Selecting the Right Model:
◆ Choose the SU29 frame when you plan three fully loaded levels of heavy beams, when forklift traffic is heavy at the rack face, or when your engineer or insurer asks for a 13 gauge column. If a 14 gauge IU18 or IU24 frame already carries your total bay load with margin, the lighter frame costs less to ship and install.
◆ Start with the heaviest pallet you will store, double it for a two-pallet bay or triple it for a three-pallet bay, and pick a beam pair rated above that total. The beam rating is per pair and assumes the load is spread evenly across both beams.
◆ Ask for the SU2942144 frame rating at your beam spacing before loading three heavy levels. Frame ratings are published at a stated beam spacing and fall as levels spread apart.
◆ Choose two levels when pallet loads run taller than about 48 inches or your forklift tops out below 12 feet. Choose three levels for shorter loads when you want the most pallet positions per bay.
◆ Choose bay width by pallets per level. A 96 inch bay fits two 40 inch pallets, a 108 inch bay fits two 48 inch pallets, and a 144 inch bay fits three 40 inch pallets, each with about 4 inches of clearance.
◆ Plan the row before you buy. One starter section plus add-on sections builds a continuous row, and an SU29 starter should be followed by SU29 add-ons so every frame in the row has the same column.

What is the difference between Husky IU18, IU24 and SU29 upright frames?
All three are Husky teardrop frames that take the same beams and Bowlock clips, so they differ only in the column. The IU18 column is 3 by 1-5/8 inches in 14 gauge, the IU24 column is 3 by 3 inches in 14 gauge, and the SU29 column is 3 by 3 inches in 13 gauge on a 5 by 7 inch base plate. Thicker and wider columns carry more total bay weight and resist forklift impact better, while the per level beam rating stays the same.

The CustomMHS pallet racking guide explains why every capacity has a condition attached (guide section 1), how frame rating and beam rating work together (section 2), the difference between roll-formed and structural rack (section 4), anchoring and load plaques (section 7 and section 8), and how to inspect for column damage (section 11).

Where Commonly Used:
Husky SU29 42x144 starter pallet rack sections are used in distribution centers, beverage and paper warehouses, metal stock rooms and building material yards where heavy pallets are stacked three high and forklift traffic at the rack face is constant.

CustomMHS carries the full line of Husky pallet rack, backed by the manufacturer’s warranty.

Frequently Asked Questions (FAQs)

What is a Husky 42x144 starter upright pallet racking unit used for?

A Husky 42x144 starter upright pallet racking unit is designed to provide heavy-duty vertical storage for palletized inventory in warehouse and industrial environments. It serves as the starting section of a pallet rack row, including the upright frames and beams needed for safe load support. Starter units can be used on their own or expanded with add-on bays as storage needs grow. They help maximize warehouse capacity while keeping inventory organized and accessible.

How does the 42x144 size support heavy-duty warehouse storage?

The deeper rack depth allows storage of larger pallets and bulk product loads, while the wide span provides increased horizontal storage space per level. This size is ideal for facilities handling high-volume inventory or oversized goods. It improves storage density without requiring additional floor space. The result is a strong capacity and efficient warehouse organization.

Why are upright frames critical in pallet racking systems?

Upright frames are the vertical foundation of pallet racking, supporting the full weight of stored pallet loads. Heavy-duty uprights provide stability, durability, and long-term safety in high-traffic forklift environments. Proper upright support helps prevent rack misalignment, structural damage, and load failure risks. Strong uprights are essential for reliable warehouse storage performance.

What types of facilities benefit most from starter upright pallet racking?

Starter upright pallet racking is commonly used in distribution centers, manufacturing plants, fulfillment warehouses, and bulk storage operations. Any facility storing palletized goods needs strong vertical storage to maximize warehouse space. These systems reduce floor clutter while keeping inventory easy to access. They are essential for high-density industrial storage environments.

How does pallet racking improve workflow and inventory control?

Pallet racking organizes products into clearly defined storage locations, making picking and replenishment faster and more efficient. It reduces floor congestion and creates safer aisles for forklifts and workers. Organized storage also supports better inventory tracking and load management. This leads to smoother operations with fewer disruptions.

Why purchase Husky upright pallet racking from CustomMHS.com?

CustomMHS.com helps you select the appropriate Husky starter upright configuration based on your load requirements, warehouse layout, and future expansion goals. Instead of guessing compatibility, you get expert guidance to ensure a safe, efficient racking system. A properly planned setup improves capacity, durability, and long-term warehouse performance. Buying from CustomMHS.com is the straightforward choice for heavy-duty pallet racking solutions done right.

Is the manufacturer’s warranty included with my purchase?

Yes. All products sold on CustomMHS.com include the original manufacturer’s warranty unless otherwise noted. Custom MHS is an authorized dealer for the brands we carry, which means your purchase is covered by the manufacturer's full factory warranty.

Do you ship nationwide?

Yes. We ship throughout the United States and Canada using trusted freight partners experienced in handling industrial equipment. Our team coordinates shipping details to ensure safe and efficient delivery.