Husky 42x192 Add-On Pallet Racking Section, IU18 Frame

A Husky 42x192 add-on pallet racking section is the bay that extends an existing row of Husky Invincible teardrop pallet rack: it ships with one IU18420192 upright frame measuring 42 inches deep by 192 inches high, three or four pairs of Husky IBX, IBN or IBH step beams, and the Bowlock clips that lock each beam to the frame. An add-on has one frame instead of two because it bolts its beams to the open side of the frame already standing at the end of the row, so each add-on shares a frame with its neighbor. A row of five bays is one starter section plus four add-ons, and every add-on must match the depth, height and column of the starter it joins. CustomMHS sells the 42x192 add-on on three frames, the standard IU18 on this page and the heavier IU24 and SU29 on their own pages, so the frame code in the model number is the first thing to match.
Add-on unit, extends an existing rowUS made high strength steel, ASTM A1011-GR55 Usually ships in 3-4 days
Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.
| Model Number | Unit Type | Dimensions | Beam Cap/Pair | Price 1-9 each, Qty Breaks | View Model |
|
3 Upper Levels, Wire Decking
|
42"D x 192"H x 48"W
|
7,383 lbs.
|
$562.37
|
||
|
3 Upper Levels, No Decking
|
42"D x 192"H x 48"W
|
7,383 lbs.
|
$438.62
|
||
|
4 Upper Levels, Wire Decking
|
42"D x 192"H x 48"W
|
7,383 lbs.
|
$672.05
|
||
|
4 Upper Levels, No Decking
|
42"D x 192"H x 48"W
|
7,383 lbs.
|
$507.61
|
||
|
3 Upper Levels, Wire Decking
|
42"D x 192"H x 96"W
|
4,044 lbs.
|
$813.55
|
||
|
3 Upper Levels, No Decking
|
42"D x 192"H x 96"W
|
4,044 lbs.
|
$565.97
|
||
|
4 Upper Levels, Wire Decking
|
42"D x 192"H x 96"W
|
4,044 lbs.
|
$1,006.32
|
||
|
4 Upper Levels, No Decking
|
42"D x 144"H x 96"W
|
4,044 lbs.
|
$677.33
|
||
|
3 Upper Levels, Wire Decking
|
42"D x 192"H x 96"W
|
5,047 lbs.
|
$820.59
|
||
|
3 Upper Levels, No Decking
|
42"D x 192"H x 96"W
|
5,047 lbs.
|
$573.02
|
||
|
4 Upper Levels, Wire Decking
|
42"D x 192"H x 96"W
|
5,047 lbs.
|
$1,015.19
|
||
|
4 Upper Levels, No Decking
|
42"D x 192"H x 96"W
|
5,047 lbs.
|
$686.24
|
||
|
3 Upper Levels, Wire Decking
|
42"D x 192"H x 96"W
|
6,111 lbs.
|
$834.74
|
||
|
3 Upper Levels, No Decking
|
42"D x 192"H x 96"W
|
6,111 lbs.
|
$588.92
|
||
|
4 Upper Levels, Wire Decking
|
42"D x 192"H x 96"W
|
6,111 lbs.
|
$1,036.44
|
||
|
4 Upper Levels, No Decking
|
42"D x 192"H x 96"W
|
6,111 lbs.
|
$707.45
|
||
|
3 Upper Levels, Wire Decking
|
42"D x 192"H x 108"W
|
5,000 lbs.
|
$901.91
|
||
|
3 Upper Levels, No Decking
|
42"D x 192"H x 108"W
|
5,000 lbs.
|
$626.13
|
||
|
4 Upper Levels, Wire Decking
|
42"D x 192"H x 108"W
|
5,000 lbs.
|
$1,101.84
|
||
|
4 Upper Levels, No Decking
|
42"D x 192"H x 108"W
|
5,000 lbs.
|
$733.97
|
||
|
3 Upper Levels, No Decking
|
42"D x 192"H x 144"W
|
3,000 lbs.
|
$723.32
|
||
|
3 Upper Levels, Wire Decking
|
42"D x 192"H x 108"W
|
8.873 lbs.
|
$979.78
|
||
|
3 Upper Levels, No Decking
|
42"D x 192"H x 108"W
|
8,873 lbs.
|
$705.71
|
||
|
4 Upper Levels, Wire Decking
|
42"D x 192"H x 108"W
|
8,873 lbs.
|
$1,232.75
|
||
|
4 Upper Levels, No Decking
|
42"D x 192"H x 108"W
|
8,873 lbs.
|
$863.09
|
||
|
3 Upper Levels, Wire Decking
|
42"D x 192"H x 120"W
|
4,062 lbs.
|
$979.78
|
||
|
3 Upper Levels, No Decking
|
42"D x 192"H x 120"W
|
4,062 lbs.
|
$656.16
|
||
|
4 Upper Levels, Wire Decking
|
42"D x 192"H x 120"W
|
4,062 lbs.
|
$1,296.38
|
||
|
4 Upper Levels, No Decking
|
42"D x 192"H x 120"W
|
4,062 lbs.
|
$794.09
|
||
|
3 Upper Levels, Wire Decking
|
42"D x 192"H x 144"W
|
3,000 lbs.
|
$1,093.01
|
||
|
4 Upper Levels, Wire Decking
|
42"D x 192"H x 144"W
|
3,000 lbs.
|
$1,379.50
|
||
|
4 Upper Levels, No Decking
|
42"D x 192"H x 144"W
|
3,000 lbs.
|
$886.04
|
||
|
3 Upper Levels, Wire Decking
|
42"D x 192"H x 144"W
|
5,569 lbs.
|
$1,216.83
|
||
|
3 Upper Levels, No Decking
|
42"D x 192"H x 144"W
|
5,569 lbs.
|
$840.01
|
||
|
4 Upper Levels, Wire Decking
|
42"D x 192"H x 144"W
|
5,569 lbs.
|
$1,531.58
|
||
|
4 Upper Levels, No Decking
|
42"D x 192"H x 144"W
|
5,569 lbs.
|
$1,036.44
|
||
|
3 Upper Levels, Wire Decking
|
42"D x 192"H x 144"W
|
7,820 lbs.
|
$1,319.37
|
||
|
3 Upper Levels, No Decking
|
42"D x 192"H x 144"W
|
7,820 lbs.
|
$947.95
|
||
|
4 Upper Levels, Wire Decking
|
42"D x 192"H x 144"W
|
7,820 lbs.
|
$1,678.33
|
||
|
4 Upper Levels, No Decking
|
42"D x 192"H x 144"W
|
7,820 lbs.
|
$1,184.92
|
The IU18420192 upright is the standard Husky Invincible column: 14 gauge roll-formed steel measuring 3 inches by 1-5/8 inches with teardrop punching on 2 inch centers, so beam levels adjust in 2 inch steps. Husky rates the frame at 18,160 pounds at 48 inch vertical beam spacing. Four levels on a 192 inch frame puts beams roughly 46 inches apart, close to that spacing; three levels spreads them to about 62 inches, where the frame carries less than the published figure. On a shared frame in the middle of a row the total includes the load from both neighboring bays, and on a 16 foot frame with three or four loaded levels that total is usually what limits the row, not the beams. Frames are finished green and beams orange. Each beam pair is rated separately. The capacities in the table below are per pair of beams, evenly distributed across both beams.
The 42 inch frame depth is sized for standard 48 inch GMA pallets, which overhang the front and rear beams by three inches on each side by design. A 192 inch frame on a 42 inch base has a height to depth ratio of about 4.6 to 1, under the 6 to 1 point where row spacers or overhead ties are required, and placing a pallet on the top beam at roughly 15 feet calls for a reach truck rated for that height. Wire decking lays across the two beams of a level to support cartons, drums and odd-sized loads and lets sprinkler water pass through. Add-ons are offered in 48, 96, 108, 120 and 144 inch bay widths so a row can mix widths as long as every bay shares the same frame: a 96 inch bay holds two 40 inch wide pallets, a 108 inch bay holds two 48 inch pallets, a 144 inch bay holds three 40 inch pallets.
Product Lines:
All forty add-ons in this category share the Husky IU18420192 frame, so the model number changes only by beam, level count and decking. Read IU18420192-IBX43096-4AW left to right: IU18 marks the standard 3 by 1-5/8 inch column, 420192 is the 42 inch deep by 192 inch high frame, IBX43096 is a 4-3/8 inch tall step beam 96 inches long, 4A means four beam levels in an add-on section (3A means three; a starter would read 4S or 3S), and a W on the end means wire decking is included. IBX beams are the standard Husky step beam, IBN beams are the heavier 5-1/2 inch profile, and the IBH60144 is a 6 inch beam for the heaviest 144 inch spans.
Per pair beam capacities by bay width: 48 inch bays use the IBX30048 beam rated 7,383 pounds. 96 inch bays use the IBX35096 at 4,044 pounds, the IBX39096 at 5,047 pounds, or the IBX43096 at 6,111 pounds. 108 inch bays use the IBX43108 at 5,000 pounds or the IBN55108 at 8,873 pounds. 120 inch bays use the IBX43120 at 4,062 pounds. 144 inch bays use the IBX43144 at 3,000 pounds, the IBN55144 at 5,569 pounds, or the IBH60144 at 7,820 pounds. Every beam is offered in three or four levels, each with wire decking (AW) or without (A), which is how ten beams become forty add-ons.
Selecting the Right Model:
◆ Match the frame code first. An IU18 add-on joins an IU18 starter; if your row was built on IU24 or SU29 frames, buy the add-on from that page instead. The frame number before the first hyphen (IU18420192) and the level count (3A or 4A) should both match the starter.
◆ Count bays, not frames. A row of N bays needs one starter and N minus 1 add-ons. Buying a starter for every bay wastes a frame per bay and adds 3 inches of width each time.
◆ Add up every loaded level on both sides of each shared frame and keep the total under the 18,160 pound frame rating. Four levels of IBX43096 beams fully loaded is 24,444 pounds from one bay alone, so on a 16 foot IU18 frame lighter loads per level are the norm, or the row belongs on the IU24 frame.
◆ Start with the heaviest pallet you will store, double it for a two-pallet bay or triple it for a three-pallet bay, and pick a beam pair rated above that total. The beam rating is per pair and assumes the load is spread evenly across both beams.
◆ Choose bay width by pallets per level. A 96 inch bay fits two 40 inch pallets, a 108 inch bay fits two 48 inch pallets, and a 144 inch bay fits three 40 inch pallets, each with about 4 inches of clearance. Widths can vary down a row as long as the frame is the same.
◆ Add wire decking (the AW models) if you will ever place cartons, drums or loose items on the rack, or if your fire code or insurer asks for open decking under sprinklers. Wire decking does not raise the beam capacity.
Does adding a bay to a 16 foot pallet rack row change what the existing frames can carry?
Yes for the frame the new bay attaches to: that end frame was carrying beams on one side only, and after the add-on goes in it carries beams from two bays, so its 18,160 pound rating at 48 inch beam spacing now has to cover both. With three or four levels on a 192 inch IU18420192 frame, two fully loaded bays of 6,111 pound IBX43096 beams would put far more than 18,160 pounds on the shared frame, so most rows this tall run lighter loads per level or are built on the heavier IU24 frame from the start. The other frames in the row are unaffected, but the row’s load plaque must be updated to reflect the new bay. The CustomMHS pallet racking guide explains why every capacity has a condition attached (guide section 1), how frames, beams and bays make up a row (section 2), the 6 to 1 height to depth rule for tall frames (section 6), anchoring and load plaques (section 7 and section 8), and how to inspect the existing end frame for damage before attaching to it (section 11).
Where Commonly Used:
Husky 42x192 IU18 add-on pallet rack sections are used to extend existing rows of Husky 42 inch deep, 192 inch high standard duty rack in distribution centers, third party logistics warehouses and manufacturing plants with 18 foot or higher clear ceilings that store standard 48 inch pallets three or four levels high.
CustomMHS carries the full line of Husky Invincible pallet rack, backed by the manufacturer’s warranty.