Industrial Equipment Experts Since 1980 | Mon–Fri, 7 AM–6 PM ET
No bots. Real experts. 866-333-0728
Get a Fast Quote
Get a Fast Quote

Husky 48x120 Starter Pallet Racking Section, IU18 Frame

Husky 48x120 Starter Pallet Racking Section | IU18 Upright Frame

A Husky 48x120 starter pallet racking section is a complete, freestanding bay of Husky Invincible teardrop pallet rack built on two IU18480120 upright frames measuring 48 inches deep by 120 inches high, with two or three pairs of Husky IBX, IBN or IBH step beams locked in place by Bowlock clips. A starter section is the first bay in a row of pallet rack. It stands on its own, and every bay added after it shares one of its frames, which is why add-on sections ship with one frame instead of two. The 48 inch frame depth is the choice for pallets deeper than the standard 48 inch GMA footprint, for 48 inch pallets that must sit fully supported with no overhang, and for loads such as drums, crates and long cartons that need the full beam to beam depth under them.

Starter unit, stand alone unit or to start a rowUS made high strength steel, ASTM A1011-GR55 Usually ships in 3-4 days

Get a Fast Quote →Read our Buying Guide →

Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.

Model Number Unit Type Dimensions Beam Cap / Pair Price 1-9 each, Qty Breaks View Model
2 Upper Levels, Wire Decking
48"D x 120"H x 48"W
7,383 lbs.
$564.18
2 Upper Levels, No Decking
48"D x 120"H x 48"W
7,383 lbs.
$468.68
3 Upper Levels, Wire Decking
48"D x 120"H x 48"W
7,383 lbs.
$679.16
3 Upper Levels, No Decking
48"D x 120"H x 48"W
7,383 lbs.
$535.85
2 Upper Levels, Wire Decking
48"D x 120"H x 96"W
4,044 lbs.
$744.56
2 Upper Levels, No Decking
48"D x 120"H x 96"W
4,044 lbs.
$553.56
3 Upper Levels, Wire Decking
48"D x 120"H x 96"W
4,044 lbs.
$901.91
3 Upper Levels, No Decking
48"D x 120"H x 96"W
4,044 lbs.
$670.27
2 Upper Levels, Wire Decking
48"D x 120"H x 96"W
5,047 lbs.
$748.07
2 Upper Levels, No Decking
42"D x 120"H x 96"W
5,047 lbs.
$558.84
3 Upper Levels, Wire Decking
48"D x 120"H x 96"W
5,047 lbs.
$909.04
3 Upper Levels, No Decking
48"D x 120"H x 96"W
5,047 lbs.
$670.27
2 Upper Levels, Wire Decking
48"D x 120"H x 96"W
6,111 lbs.
$758.75
2 Upper Levels, No Decking
48"D x 120"H x 96"W
6,111 lbs.
$569.45
3 Upper Levels, Wire Decking
48"D x 120"H x 96"W
6,111 lbs.
$924.98
3 Upper Levels, No Decking
48"D x 120"H x 96"W
6,111 lbs.
$686.24
2 Upper Levels, Wire Decking
48"D x 120"H x 108"W
5,000 lbs.
$783.48
2 Upper Levels, No Decking
48"D x 120"H x 108"W
5,000 lbs.
$592.44
3 Upper Levels, Wire Decking
48"D x 120"H x 108"W
5,000 lbs.
$1,034.61
3 Upper Levels, No Decking
48"D x 120"H x 108"W
5,000 lbs.
$723.32
2 Upper Levels, Wire Decking
48"D x 120"H x 108"W
8,873 lbs.
$854.20
2 Upper Levels, No Decking
48"D x 120"H x 108"W
8,873 lbs.
$647.26
3 Upper Levels, Wire Decking
48"D x 120"H x 108"W
8,873 lbs.
$1,114.22
3 Upper Levels, No Decking
48"D x 120"H x 108"W
8,873 lbs.
$802.98
2 Upper Levels, Wire Decking
48"D x 120"H x 120"W
4,062 lbs.
$854.20
2 Upper Levels, No Decking
48"D x 120"H x 120"W
4,062 lbs.
$611.94
3 Upper Levels, Wire Decking
48"D x 120"H x 120"W
4,062 lbs.
$1,064.65
3 Upper Levels, No Decking
48"D x 120"H x 120"W
4,062 lbs.
$753.41
2 Upper Levels, Wire Decking
48"D x 120"H x 144"W
3,000 lbs.
$896.65
2 Upper Levels, No Decking
48"D x 120"H x 144"W
3,000 lbs.
$657.89
3 Upper Levels, Wire Decking
48"D x 120"H x 144"W
3,000 lbs.
$1,248.63
3 Upper Levels, No Decking
48"D x 120"H x 144"W
3,000 lbs.
$820.59
2 Upper Levels, Wire Decking
48"D x 120"H x 144"W
5,569 lbs.
$972.73
2 Upper Levels, No Decking
48"D x 120"H x 144"W
5,569 lbs.
$733.97
3 Upper Levels, Wire Decking
48"D x 120"H x 144"W
5,569 lbs.
$1,363.57
3 Upper Levels, No Decking
48"D x 120"H x 144"W
5,569 lbs.
$935.60
2 Upper Levels, Wire Decking
48"D x 120"H x 144"W
7,820 lbs.
$1,045.20
2 Upper Levels, No Decking
48"D x 120"H x 144"W
7,820 lbs.
$806.45
3 Upper Levels, Wire Decking
48"D x 120"H x 144"W
7,820 lbs.
$1,475.03
3 Upper Levels, No Decking
48"D x 120"H x 144"W
7,820 lbs.
$1,045.20

The IU18480120 upright uses the standard Husky Invincible column: 14 gauge roll-formed steel measuring 3 inches by 1-5/8 inches with teardrop punching on 2 inch centers, so beam levels adjust in 2 inch steps. Husky rates the frame at 18,160 pounds at 48 inch vertical beam spacing, the same rating as the 42 inch deep IU18 frames because the column is the same; the extra depth changes what fits on the beams, not what the column carries. Footplates measure 4 inches by 4-1/4 inches and anchor to the floor. Frames are finished green and beams orange, the Husky Invincible standard. Each beam pair is rated separately, and the beam rating, not the frame rating, is normally what limits how much goes on a single level. The capacities in the table below are per pair of beams, evenly distributed across both beams.

The 120 inch frame is the step up from 96 inches in the Husky 48 inch deep line and is offered with two or three beam levels. Three levels on a 10 foot frame puts beams roughly 38 inches apart, which suits mid height loads such as case goods, drums standing upright and half height pallets; two levels suits full height pallets with room to spare. Wire decking lays across the two beams of a level to support cartons, drums and odd-sized loads that would otherwise sit on open beams, and it lets sprinkler water pass through. On a 48 inch deep frame the decks are 48 inches deep to match. Sections are offered in 48, 96, 108, 120 and 144 inch bay widths: a 96 inch bay holds two 40 inch wide pallets, a 108 inch bay holds two 48 inch pallets, a 144 inch bay holds three 40 inch pallets.


Product Lines:
All forty sections in this category share the Husky IU18480120 frame, so the model number changes only by beam, level count and decking. Read IU18480120-IBX43096-3SW left to right: IU18 marks the 3 by 1-5/8 inch column, 480120 is the 48 inch deep by 120 inch high frame, IBX43096 is a 4-3/8 inch tall step beam 96 inches long, 3S means three beam levels in a starter section (2S means two), and a W on the end means wire decking is included. IBX beams are the standard Husky step beam, IBN beams are the heavier 5-1/2 inch profile, and the IBH60144 is a 6 inch beam for the heaviest 144 inch spans.

Per pair beam capacities by bay width: 48 inch bays use the IBX30048 beam rated 7,383 pounds. 96 inch bays use the IBX35096 at 4,044 pounds, the IBX39096 at 5,047 pounds, or the IBX43096 at 6,111 pounds. 108 inch bays use the IBX43108 at 5,000 pounds or the IBN55108 at 8,873 pounds. 120 inch bays use the IBX43120 at 4,062 pounds. 144 inch bays use the IBX43144 at 3,000 pounds, the IBN55144 at 5,569 pounds, or the IBH60144 at 7,820 pounds. Every beam is offered in two or three levels, each with wire decking (SW) or without (S), which is how ten beams become forty sections.


Selecting the Right Model:
◆ Choose 48 inch deep frames over 42 inch when your pallets are deeper than 48 inches, when loads must not overhang the beams, or when you store drums, crates or cartons that need support across the full depth. For standard 48 inch GMA pallets a 42 inch frame is the usual choice because the 3 inch overhang front and back is by design.
◆ Start with the heaviest pallet you will store, double it for a two-pallet bay or triple it for a three-pallet bay, and pick a beam pair rated above that total. The beam rating is per pair and assumes the load is spread evenly across both beams.
◆ Add up every loaded level and keep the total under the 18,160 pound frame rating. Three levels of IBN55108 beams fully loaded is 26,619 pounds, more than the frame carries, so heavy beams and three levels do not always go together.
◆ Choose two levels for full height pallets up to about 56 inches and three levels for loads under about 34 inches tall. With two levels the beam spacing runs wider than the 48 inches the frame rating assumes, so confirm the reduced rating with Husky.
◆ Choose bay width by pallets per level. A 96 inch bay fits two 40 inch pallets, a 108 inch bay fits two 48 inch pallets, and a 144 inch bay fits three 40 inch pallets, each with about 4 inches of clearance.
◆ Add wire decking (the SW models) if you will ever place cartons, drums or loose items on the rack, or if your fire code or insurer asks for open decking under sprinklers. Wire decking does not raise the beam capacity. Plan the row before you buy: one starter plus add-ons builds a continuous row.


How much can a Husky 48x120 pallet rack hold per level?

Each level of a Husky 48x120 starter section holds what its beam pair is rated for: 7,383 pounds on a 48 inch bay with IBX30048 beams, 4,044 to 6,111 pounds on a 96 inch bay depending on the beam, 5,000 or 8,873 pounds on a 108 inch bay, 4,062 pounds on a 120 inch bay, and 3,000 to 7,820 pounds on a 144 inch bay. The total of all loaded levels must also stay under the IU18480120 frame rating of 18,160 pounds at 48 inch beam spacing, so a three level bay with 8,873 pound beams cannot be fully loaded on every level. The 48 inch frame depth does not change either rating; it changes what fits on the beams. The CustomMHS pallet racking guide explains why every capacity has a condition attached (guide section 1), how frame rating and beam rating work together (section 2), how frame depth is matched to pallet depth (section 6), anchoring and load plaques (section 7 and section 8), and why wire decking is rated for distributed loads (section 10).


Where Commonly Used:
Husky 48x120 starter pallet rack sections are used in warehouses, manufacturing plants and distribution centers that store oversized pallets, drums, crates or long cartons on two or three forklift-accessible beam levels under 12 to 14 foot ceilings.

CustomMHS carries the full line of Husky Invincible pallet rack, backed by the manufacturer’s warranty.

Frequently Asked Questions (FAQs)

What is a Husky 48x120 starter pallet racking unit used for?

A Husky 48x120 starter pallet racking unit is designed to create heavy-duty vertical storage for palletized inventory in warehouse and industrial environments. It serves as the starting section of a pallet rack row, providing the upright frames and beam connections needed for safe load support. Starter units can stand alone or expand with add-on bays as storage needs grow. They help maximize warehouse capacity while keeping inventory organized and accessible.

How does the 48x120 size support heavy-duty warehouse storage?

The deeper rack depth provides extra room for storing larger pallets and bulk inventory loads, while the wide span offers increased horizontal storage capacity per level. This size is ideal for facilities handling oversized goods or high-volume palletized products. It improves storage density without consuming additional floor space. The result is an efficient, high-capacity warehouse organization.

Why are heavy-duty upright frames important in pallet racking systems?

Upright frames are the vertical foundation of pallet racking, supporting the full weight of stored pallet loads. Heavy-duty uprights provide stability and durability in high-traffic forklift environments. Strong frames help prevent misalignment, structural damage, and load safety risks over time. Reliable upright support is essential for long-term rack performance.

What types of facilities benefit most from Husky starter pallet racking?

Starter pallet racking is widely used in distribution centers, manufacturing plants, fulfillment warehouses, and bulk storage operations. Any facility storing palletized inventory benefits from strong vertical storage that keeps products accessible. These systems reduce floor congestion and improve warehouse traffic flow. They are essential for high-density industrial storage environments.

How does pallet racking improve warehouse workflow and efficiency?

Pallet racking keeps inventory stored in clearly defined vertical locations, making picking and replenishment faster and more consistent. It reduces floor clutter and improves aisle safety for forklifts and workers. Organized rack systems also support better inventory control and load management. This leads to smoother operations with fewer disruptions.

Why buy Husky starter pallet racking from CustomMHS.com?

CustomMHS.com helps you choose the correct Husky starter configuration based on your load requirements, warehouse layout, and future expansion goals. Instead of guessing compatibility, you get expert support for a safe and efficient racking solution. A properly planned system improves capacity, durability, and long-term reliability. Buying from CustomMHS.com is the straightforward choice for heavy-duty warehouse pallet racking done right.

Is the manufacturer’s warranty included with my purchase?

Yes. All products sold on CustomMHS.com include the original manufacturer’s warranty unless otherwise noted. Custom MHS is an authorized dealer for the brands we carry, which means your purchase is covered by the manufacturer's full factory warranty.

Do you ship nationwide?

Yes. We ship throughout the United States and Canada using trusted freight partners experienced in handling industrial equipment. Our team coordinates shipping details to ensure safe and efficient delivery.