Industrial Equipment Experts Since 1980 | Mon–Fri, 7 AM–6 PM ET
No bots. Real experts. 866-333-0728
Get a Fast Quote
Get a Fast Quote

MECO Series 1000 Cantilever Rack Starter and Add-On Units

MECO Series 1000 Cantilever Rack Starter and Add-On Units  MECO Series 1000 Cantilever Rack Starter and Add-On Units    MECO Series 1000 Cantilever Rack Starter and Add-On UnitsMECO Series 1000 Cantilever Rack Starter and Add-On Units

A MECO Series 1000 cantilever rack starter unit is a complete medium duty cantilever bay sold under one model number: 2 uprights with bases, 1 brace set and a matched set of straight arms. An add-on unit extends that bay by one more: it includes 1 upright with base, 1 brace set and half as many arms as the starter, and it connects to the last upright of the run. A run of four bays is one starter plus three add-ons. The units exist so a shopper does not have to match uprights, bases, braces and arms piece by piece; MECO has already paired each height with the right base and arm length.

 

Get a Fast Quote →Read our Buying Guide →

Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.

Model Number Rack Type Upright Height x Base Lenght No. of Arms / Capacity per Arm Price View Model
Single Sided (Starter)
6' tall, 33" base & 47" brace set
(6) 12" arms, 1,000 pounds
$673.00
Single Sided (Add-on)
6' tall, 33" base & 47" brace set
(3) 12" arms, 1,000 pounds
$368.00
Single Sided (Starter)
8' tall, 33" base & 47" brace set
(8) 24" arms, 600 pounds
$842.00
Single Sided (Add-on)
8' tall, 33" base & 47" brace set
(4) 24" arms, 600 pounds
$454.00
Single Sided (Starter)
10' tall, 45" base & 71" brace set
(12) 36" arms, 400 pounds
$1,198.00
Single Sided (Add-on)
10' tall, 45" base & 71" brace set
(6) 36" arms, 400 pounds
$640.00
Double Sided (Starter)
6' tall, 54" base & 47" brace set
(12) 12" arms, 1,000 pounds
$925.00
Double Sided (Add-on)
6' tall, 54" base & 47" brace set
(6) 12" arms, 1,000 pounds
$495.00
Double Sided (Starter)
8' tall, 54" base & 47" brace set
(16) 24" arms, 600 pounds
$1,200.00
Double Sided (Add-on)
8' tall, 54" base & 47" brace set
(8) 24" arms, 600 pounds
$630.00
Double Sided (Starter)
10' tall, 78" base & 71" brace set
(24) 36" arms, 400 pounds
$1,825.00
Double Sided (Add-on)
10' tall, 78" base & 71" brace set
(12) 36" arms, 400 pounds
$955.00

There are three sizes, each sold single sided or double sided. The 6 foot units carry 12 inch arms rated 1,000 pounds each on a 33 inch base (54 inch for double sided) with a 47 inch brace set. The 8 foot units carry 24 inch arms rated 600 pounds each on the same bases and brace set. The 10 foot units carry 36 inch arms rated 400 pounds each on a 45 inch base (78 inch for double sided) with a 71 inch brace set. The brace set length is the spacing between uprights, so uprights stand about 4 feet apart on the 6 and 8 foot units and about 6 feet apart on the 10 foot units. Arm ratings are for evenly distributed loads, and the arms adjust up or down on 3 inch centers.

Each upright also has a total rating that the arms on it cannot exceed together: 8,100 pounds on the 6 foot single sided unit, 5,300 pounds on the 8 foot and 3,800 pounds on the 10 foot, and twice those figures on the double sided units (16,200, 10,600 and 7,600 pounds). Single sided units stand with their back to a wall and load from the front; double sided units stand in open floor and load from both faces. MECO requires every base to be anchored to the floor and states that uprights must never be attached to walls. The Series 1000 column is 3 inches wide by 6-1/4 inches deep, finished in gray enamel, and Series 1000 uprights, arms and brace sets fit only other Series 1000 parts.


Product Lines:

The model number tells you what you are buying. S is a starter and A is an add-on, M is Series 1000, D means double sided, and the number is the height in feet. SM8 is an 8 foot single sided starter; AMD10 is a 10 foot double sided add-on.

Single sided starters: SM6 has 6 arms 12 inches long, SM8 has 8 arms 24 inches long, SM10 has 12 arms 36 inches long. Single sided add-ons: AM6 has 3 arms, AM8 has 4 arms, AM10 has 6 arms.

Double sided starters: SMD6 has 12 arms 12 inches long, SMD8 has 16 arms 24 inches long, SMD10 has 24 arms 36 inches long. Double sided add-ons: AMD6 has 6 arms, AMD8 has 8 arms, AMD10 has 12 arms.

That works out to 3 arm levels per upright face on the 6 foot units, 4 levels on the 8 foot units and 6 levels on the 10 foot units. All arms supplied are straight arms.


Selecting the Right Model:
◆ Pick the size from the depth and weight of your material. The 6 foot units have the shortest arms and the highest per arm rating (12 inches, 1,000 pounds); the 10 foot units have the longest arms and the lowest (36 inches, 400 pounds).
◆ Check the upright total as well as the arm rating. On an SM10, six arms at 400 pounds each is 2,400 pounds, inside the 3,800 pound upright rating; on any unit, do not load past either number.
◆ Choose single sided for a run against a wall and double sided for a run in open floor with an aisle on both sides.
◆ Buy one starter per run and one add-on for each additional bay. Starters and add-ons must be the same model family (SM8 with AM8, SMD10 with AMD10).
◆ Check that your material spans the uprights. Uprights sit about 4 feet apart on 6 and 8 foot units and about 6 feet apart on 10 foot units, so stock shorter than that needs a different brace length, built from separate Series 1000 components.
◆ If you need inclined arms for pipe, other arm lengths, or 7 and 12 foot heights, build the rack from individual Series 1000 uprights, brace sets and arms. Pre-configured units come with straight arms only.
◆ Plan to anchor every base to the floor. Anchors are not supplied by MECO.


What comes in a MECO Series 1000 cantilever starter unit, and what comes in an add-on?

A starter unit includes 2 uprights with bases, straight arms and 1 brace set, which makes one complete bay; an add-on unit includes 1 upright with base, straight arms and 1 brace set, which adds one more bay to the end of a run. For example, the SM8 starter has two 8 foot uprights on 33 inch bases, eight 24 inch arms rated 600 pounds each and a 47 inch brace set, and the AM8 add-on has one 8 foot upright, four 24 inch arms and a 47 inch brace set. Anchors are not included. The CustomMHS cantilever racking guide explains why arm length sets capacity (guide section 1), the three capacities to check (section 2), single versus double sided (section 5), why parts do not cross series (section 6), how starter and add-on units work (section 7), and anchoring (section 9).


Where Commonly Used:
MECO Series 1000 cantilever starter and add-on units are used in maintenance departments, tool rooms, fabrication shops, building supply stores and warehouses to store bundled pipe, conduit, tubing, bar stock, trim and lumber off the floor.

CustomMHS carries the full line of MECO Series 1000 cantilever racking, backed by the manufacturer’s warranty.

Frequently Asked Questions (FAQs)

What is the difference between a starter unit and an add-on unit?

A starter unit is one complete bay, including two uprights, straight arms, and brace sets. An add-on unit expands an existing bay without duplicating the uprights and braces already in place, which is what makes it the lower-cost way to extend a run. Order a starter first, then add-ons for each additional bay.

What upright heights and configurations are available?

Twelve configurations across three upright heights of 6, 8, and 10 feet, each available as a starter or add-on and in single or double-sided form. Single-sided units suit wall placement. Double-sided units suit open floor areas where material is accessed from both sides.

How does upright height affect arm count and capacity?

They trade against each other. Taller uprights generally pair with more arms at a lower per-arm capacity, while shorter uprights use fewer, longer arms at a higher per-arm capacity. The 6 foot SM6 starter provides six 12 inch arms rated at 1,000 pounds each, while the 8 foot SM8 provides eight 24 inch arms rated at 600 pounds each. Select against both your ceiling clearance and the weight of your heaviest material.

Are Series 1000 components interchangeable with other MECO racks?

No. Series 1000 uprights, arms, and brace sets are not interchangeable with any other MECO rack series. When ordering additional arms, braces, or add-on bays, confirm every component is Series 1000 rather than assuming compatibility across the MECO line, since a mismatch affects fit, stability, and performance.

What base and brace dimensions do these units use?

The 6 foot and 8 foot models listed use a 33 inch base with a 47 inch brace set. Measure your available depth against the base dimension rather than the arm length, since the base determines the floor footprint the rack occupies and needs clearance on the access side.

What should I confirm before ordering?

Three things. Measure ceiling clearance against the 6, 8, or 10 foot upright height. Check the length of your longest material against the arm length in the configuration you are considering, since arm lengths vary by model. And weigh your heaviest single load against the per-arm capacity rather than the total, because that rating is what governs each individual arm.