Talk to an Expert: 866-333-0728
No bots. No guesswork. Real experts.

  • Your shopping cart is empty!

Menu

Low Profile Self-Dumping Hoppers

Low Profile Self-Dumping Hoppers, 2,000 to 6,000 lb Capacity

Low-profile self-dumping hoppers reduce the height workers reach over when loading material by hand, without sacrificing capacity. Available from 2,000 up to 6,000 pounds, these hoppers suit operations where manual or hand-fed loading happens throughout the shift and a standard hopper's sidewall height would slow workers down.

Models and Specifications:

♦ Jesco Low Profile Hopper, 12-gauge body, 8-gauge base. 2,000 to 4,000 lb capacity.
♦ Jesco Low Profile Hopper, 12-gauge body, 1/4" thick base. 6,000 lb capacity, 2.5 to 3.5 cubic yards.
♦ MECO Low Profile Hopper, 7-gauge body, 7-gauge base. 5,000 lb capacity, 3 to 3.5 cubic yards.

Selecting the Right Model:

♦ Capacity, choose from 2,000 up to 6,000 lb based on the volume of material handled per load.
♦ Base thickness, choose the Jesco 1/4" base model for the highest capacity, or the standard 8-gauge base for lighter-duty use.
♦ Loading method: choose a low-profile hopper specifically for hand-fed or manual loading tasks where reach height matters.

Where Commonly Used:

♦ Manual Loading Stations, the lower sidewall height makes hand-fed loading faster and more comfortable.
♦ Manufacturing Floors, low-profile hoppers collect scrap without requiring workers to reach high over the wall.
♦ Assembly Lines, easier-loading height supports frequent manual material collection.
♦ Machine Shops, reinforced bases withstand repeated dumping while keeping loading height manageable.

CustomMHS carries the full line of Jesco and MECO low-profile self-dumping hoppers, backed by each manufacturer's warranty.

 


 

jesco hopper


Jesco Low Profile Hopper, 12-gauge body, 8-gauge base

2,000 to 4,000-pound capacity hopper with a lower profile for easier loading.

 View All → 

 

Jesco hopper

Jesco Low Profile Hopper, 12-gauge body, 1/4" thick base

6,000-pound capacity low-profile hopper spans 2.5 to 3.5 cubic yards.

 View All → 

 

Imagem

MECO Low Profile Hopper, 7-gauge body, 7-gauge base

5,000-pound capacity hopper spans 3 to 3.5 cubic yards with an easier-loading height.

 View All → 

 

Frequently Asked Questions (FAQs)

What is a low profile self-dumping hopper?
A low profile self-dumping hopper has shorter sidewalls than a standard hopper, so workers reach over less height when loading material by hand. It still lifts, transports, and dumps by forklift the same way. Capacities run from 2,000 to 6,000 pounds, so the lower height does not come at the cost of capacity. CustomMHS carries the full line of Jesco and MECO low-profile self-dumping hoppers, backed by each manufacturer's warranty.
When does sidewall height actually matter?
It matters when material goes into the hopper by hand rather than by machine or chute. Every hand-fed load means lifting material over the wall, and on a standard hopper that reach is high enough to slow the motion and add strain, especially with heavier pieces. If your hopper is filled by a conveyor, a machine discharge, or only occasionally by hand, standard sidewall height is fine, and the choice comes down to capacity alone.
What capacities and volumes are available?
Three models cover the range. The Jesco low profile hopper with a 12-gauge body and 8-gauge base spans 2,000 to 4,000 pounds. The Jesco model with a 1/4" thick base handles 6,000 pounds across 2.5 to 3.5 cubic yards. The MECO low profile hopper uses a 7-gauge body and 7-gauge base at 5,000 pounds, covering 3 to 3.5 cubic yards.
Which base thickness should I choose?
The base absorbs the impact of material dropping in and the abrasion of every load sliding out during a dump, so it wears before the walls do. The 8-gauge base suits lighter-duty use at the lower capacities. The 1/4" Jesco base and the 7-gauge MECO base are the ones to specify when material is dense or sharp, or when the hopper cycles daily in a machine shop where metal scrap is the norm.
How do low profile self-dumping hoppers help your facility?
Reducing the reach height changes a motion that repeats dozens or hundreds of times per shift at a manual loading station, and that repetition is where shoulder and back strain accumulates. Lower walls also speed up each load, since workers are not raising material higher than necessary before releasing it. Everything else the hopper does stays the same, so material still goes in at the point where it is generated and comes out at the dumpster without shoveling or manual transfer. At assembly lines and manufacturing floors where scrap is collected by hand throughout the day, that combination keeps collection quick without giving up the capacity that reduces how often the hopper needs emptying.

Built for Manufacturers, Warehouses &
Industrial Facilities

CustomMHS is an authorized distributor of industrial storage and material handling equipment for manufacturers, warehouses, distribution centers,
and industrial facilities across North America. From shelving systems and pallet racking to storage containers, workbenches, carts, security fencing, and cabinets,
we carry industrial-grade brands and help you choose the right specs, load ratings, and configuration for your facility, workflow, and space before you order.