Akro-Mils 30-Series AkroBins Small Parts Plastic Bins

Akro-Mils 30-Series Small Part Plastic Bins

Akro-Mils 30-Series Small Parts Plastic Bins | Stackable AkroBins for Shelving, Racks, and Panels

Akro-Mils 30-Series AkroBins are the standard stackable small-parts bin used across manufacturing, warehousing, maintenance, and assembly environments. The open front lets you see and retrieve contents without removing the bin from the shelf. Each bin stacks securely on top of bins of the same or compatible sizes, and most 30-Series AkroBins mount directly to louvered panels for wall or mobile panel storage. Compatible dividers and a lid are available as accessories to further organize contents and close off individual bins when needed.

Fourteen bin sizes are available, from the compact 30210 (5-3/8" outside length, 24 bins per carton) up to the large 30270 (18" outside length, 3 bins per carton). All prices on this page are per carton. Carton quantities vary by size from 3 to 24 bins per carton. Confirm the carton quantity for the selected model before ordering.

Selecting the Right Bin:

♦ Size selection: choose based on the inside dimensions, not the outside dimensions. The inside dimensions determine how much usable space is available for the stored part. The outside dimensions determine whether the bin fits the shelf opening, panel slot, or stacking footprint.
♦ Louvered panel compatibility: Most 30-Series AkroBins hang on standard louvered panels.
♦ Divider compatibility: Dividers are model-specific; confirm the divider matches the bin model being used before ordering.
♦ Lid compatibility: each lid is designed for one specific bin model; confirm fit before ordering.

Where Commonly Used:

30-Series AkroBins are used on manufacturing assembly lines where a defined, labeled bin location for each component reduces part mix-up and keeps workstations organized across shifts; in maintenance and MRO stockrooms to assign fasteners, fittings, and electrical components a fixed, visible location; in warehouse and distribution picking lines to create a bin-level pick address for high-variety SKUs; in tool cribs for organized, visible dispensing of small tooling and hardware; and in kanban replenishment systems where paired bins rotate at the reorder signal to maintain continuous supply.

CustomMHS is an authorized Akro-Mils distributor. All purchases include the manufacturer's factory warranty.

Don't see exactly what you need?

Check the inside dimensions before you order. On a hopper front bin, the inside is smaller than the outside, and the bottom is shorter still because of the sloped front.

Read the Small Parts Bins Buying Guide →

Get a Fast Quote →

No obligation, and our team personally reviews every quote; it isn’t generated automatically.

Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.

Model Number	Outside L x W x H	Inside L x W x H	Carton Quantity	Carton Pricing	View Model
30210	5-3/8" x 4-1/8" x 3"	4-3/4" x 3-7/16" x 2-13/16"	24 Bins Per Carton	$27.60	View Model
30211CRY	Lid	Use with 30210 bin	24 Per Carton	$40.80	View Model
30220	7-3/8" x 4-1/8" x 3"	6-3/4" x 3-7/16" x 2-13/16"	24 Bins Per Carton	$37.44	View Model
30221CRY	Lid	Use with 30220 bin	24 Per Carton	$40.60	View Model
30230	10-7/8" x 5-1/2" x 5"	10-1/4" x 4-3/8" x 4-3/4"	12 Per Carton	$45.36	View Model
30231CRY	Lid	Use with 30230 bin	12 Per Carton	$46.38	View Model
30224	10-7/8" x 4-1/8" x 4"	10-1/4" x3-3/16" x 3-3/4"	12 Bins Per Carton	$31.20	View Model
30225CRY	Lid	Use with 30224 bin	12 Per Carton	$31.20	View Model
30234	14-3/4" x 5-1/2" x 5"	14-1/16" x 4-3/8" x 4-3/4"	12 Bins Per Carton	$73.65	View Model
30235	10-7/8" x 11" x 5"	10-1/4" x 10" x 4-3/4"	6 Bins Per Carton	$35.46	View Model
30236CRY	Lid	Use with 30235 bin	6 Per Carton	$30.55	View Model
30237	9-1/4" x 6" x 5"	8-9/16" x 4-7/8" x 4-3/4"	12 Bins Per Carton	$49.44	View Model
30239	10-3/4" x 8-1/4" x 7"	10" x 6-9/16" x 6-3/4"	6 Bins Per Carton	$41.10	View Model
30240	14-3/4" x 8-1/4" x 7"	14" x 6-9/16" x 6-3/4"	12 Bins Per Carton	$89.75	View Model
30250	14-3/4" x 16-1/2" x 7"	14" x 14-3/4" x 6-3/4"	6 Bins Per Carton	$65.80	View Model
30255	10-7/8" x 16-1/2" x 5"	9-3/4" x 15" x 4-3/4"	6 Bins Per Carton	$73.20	View Model
30260	18" x 11" x 10"	17" x 9-1/2" x 9-3/4"	6 Bins Per Carton	$101.00	View Model
30265	18" x 8-1/4" x 9"	17-1/8" x 6-3/4" x 8-1/4"	6 Bins Per Carton	$103.08	View Model
30270	18" x 16-1/2" x 11"	17-1/8" x 14-3/4" x 10-1/4"	3 Bins Per Carton	$63.00	View Model
40210	Divider	Fits 30210	6 Dividers	$4.60	View Model
40220	Divider	Fits 30220	6 Dividers	$5.73	View Model
40224	Divider	Fits 30224	6 Dividers	$13.45	View Model
40230	Divider	Fits 30230, 30235, 30255	6 Dividers	$9.35	View Model
40234	Divider	Fits 30234	6 Dividers	$16.76	View Model
41230	Width Divider	Fits 30230	6 Dividers	$7.15	View Model
40239	Divider	Fits 30-239	6 Dividers	$16.00	View Model
40245	Divider	Fits 30240 & 30250	6 Dividers	$15.03	View Model
40260	Divider	Fits 30260	6 Dividers	$23.46	View Model
40265	Divider	Fits 30-265	6 Dividers	$32.75	View Model
40270	Divider	Fits 30-270	6 Dividers	$35.30	View Model

Frequently Asked Questions (FAQs)

What are Akro-Mils 30-Series AkroBins?

The 30-Series AkroBin is the standard stackable small-parts bin used across manufacturing, warehousing, maintenance, and assembly operations. The open front lets contents be seen and retrieved without removing the bin from the shelf, and each bin stacks securely on bins of the same or compatible size. Most models also mount directly to louvered panels. CustomMHS is an authorized Akro-Mils distributor, and all purchases include the manufacturer's factory warranty

What sizes are available?

Fourteen sizes cover the range, from the compact 30210 at 5-3/8" outside length up to the large 30270 at 18" outside length. All prices are per carton, and carton quantities vary by size from 3 bins per carton on the largest models up to 24 on the smallest. Confirm the carton quantity for your selected model before ordering, since the count changes significantly across the line.

Should I size by inside or outside dimensions?

Both, for different purposes. Inside dimensions determine how much usable space the stored part actually has, so that is what confirms the bin works for your components. Outside dimensions determine whether the bin fits the shelf opening, panel slot, or stacking footprint. Both are listed in the product table for every model, and checking only one is how a bin ends up either too tight for the part or too large for the shelf.

How do I choose the right divider?

Dividers are model-specific, so match the part number to the bin. The 40210 fits only the 30210, the 40220 only the 30220, and the 40224 only the 30224. A few cover more than one bin: the 40230 fits the 30230, 30235, and 30255, and the 40245 fits both the 30240 and 30250. The 41230 is a width divider for the 30230 only. Order the divider that matches the bin model rather than assuming compatibility across sizes.

How do 30-Series bins help your facility?

Assigning every SKU a fixed, visible bin location is what makes small-parts storage repeatable, since a labeled position speeds retrieval and reduces the part mix-ups that happen when similar components sit together loose. On assembly lines that means a workstation stays organized across shifts. In distribution picking, each bin becomes a pick address, so orders are filled from a defined location rather than searched out of bulk containers. The stackable design also supports two-bin kanban replenishment, where one bin runs active while the second holds safety stock and the two rotate at the reorder signal, keeping supply continuous without inventory transactions at the point of use.