Industrial Equipment Experts Since 1980 | Mon–Fri, 7 AM–6 PM ET
No bots. Real experts. 866-333-0728
Get a Fast Quote
Get a Fast Quote

Akro-Mils ShelfMax 6-Inch Heavy-Duty Plastic Shelf Bins

Akro-Mils ShelfMax 6 Inch Heavy-Duty Plastic Shelf Bin 

Akro-Mils ShelfMax 6-inch shelf bins are the taller counterpart to the 4-inch shelf bin. Akro-Mils states that they hold up to 85% more than traditional 4-inch bins. More inventory per shelf position means fewer restocks on fast-moving small parts. The front opening is 3/4 in. higher than on comparable 6-inch bins, reinforced side ribs add strength, and a built-in rear hanglock lets the bin tilt out for full access.

Front opening is 3/4" higher than comparable 6" productsLarge label areaReinforced side ribsRolled ridge for added strength

Get a Fast Quote →Read the Buying Guide →

Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.

Model Number Size Carton Quantity Carton Pricing View Model
11-5/8" long x 4-1/8" wide x 6" high
16
$61.00
11-5/8" long x 6-5/8" wide x 6" high
10
$49.70
11-5/8" long x 8-3/8" wide x 6" high
8
$54.30
17-7/8" long x 4-1/8" wide x 6" high
8
$42.00
17-7/8" long x 6-5/8" wide x 6" high
10
$61.50
17-7/8" long x 8-3/8" wide x 6" high
8
$61.20
23-5/8" long x 6-5/8" wide x 6" high
10
$70.00
23-5/8" long x 8-3/8" wide x 6" high
6
$46.80
23-5/8" long x 11-1/8" wide x 6" high
6
$75.00
Dividers for: 30040 & 30048 bins
6
$12.76
Dividers for: 30090, 30098 & 30094 bins
6
$14.77
Dividers for: 30080, 30088 & 30084 bins
6
$14.32

Shelf depth decides which bin fits. The three bin lengths are 11-5/8, 17-7/8 and 23-5/8 in., sized for 12, 18 and 24 in. deep shelves. Pick a length that stays inside the shelf edge, because a bin that overhangs is a snag hazard and gets knocked off. Catalog listings give outside dimensions, since those decide shelf fit. Check your parts against the inside dimensions.

Bin widths run from 4-1/8 to 11-1/8 in. Width dividers split a bin into compartments, so one divided bin can replace several small bins. Dividers are model specific. Order the divider that matches the bin width when you order the bin.


Selecting the Right ShelfMax Bin
◆ Shelf depth, 11-5/8 in. long bins for 12 in. shelves, 17-7/8 in. for 18 in. and 23-5/8 in. for 24 in.
◆ Bin width, 4-1/8 to 11-1/8 in., set by part size and how many bins you want across the shelf opening
◆ 4 in. or 6 in. height, 4 in. bins fit more rows on tightly spaced shelves, while 6 in. bins hold more per position
◆ Dividers, 40020 for 4-1/8 in. wide bins, 40030 for 6-5/8 in. and 40040 for 8-3/8 in.
◆ Carton quantity, 6 to 16 bins per carton, so divide the carton price by the count to compare per bin
◆ Inside dimensions, so confirm your longest part fits before ordering

Not sure which bin size fits your shelving?
The CustomMHS small parts bins buying guide covers shelf depth, bin sizing and dividers. Read the Buying Guide

Where Commonly Used
Assembly workstations, MRO stockrooms, warehouse order picking, tool crib consumables and high-velocity small parts shelving.

 

CustomMHS is an authorized distributor. All purchases include the manufacturer's factory warranty.

Frequently Asked Questions (FAQs)

What are Akro-Mils ShelfMax 6-inch shelf bins?

ShelfMax 6-inch bins are the higher-capacity version of the Akro-Mils shelf bin line, standing 6 inches high across all nine models. The open front lets workers pick directly from the bin without pulling it off the shelf. CustomMHS is an authorized Akro-Mils distributor, and all purchases include the manufacturer's factory warranty.

How do I choose between 6-inch ShelfMax and 4-inch shelf bins?

The two solve different problems. The 4-inch series is built for tight shelf spacing, where fitting the most bin rows per shelf tier is the priority. The 6-inch ShelfMax holds more per bin instead. Choose 4-inch when row density matters most on closely spaced shelves. Choose 6-inch ShelfMax when bins empty too quickly and restocking frequency is what you are trying to fix.

How do ShelfMax bins help your facility?

The gain shows up in restocking labor. When a 4-inch bin empties during a single shift, someone stops what they are doing to refill it, and that interruption repeats at every high-velocity position. A 6-inch bin holds enough to cover a full shift's consumption at the same position, so the replenishment happens once rather than mid-run. In assembly work that means a station staged at the start of a shift stays supplied through it. In distribution picking, it means high-velocity SKUs stay organized at the pick face rather than overflowing into adjacent positions and mixing.