Akro-Mils Stak-N-Store Bins | 75 Pounds Per Bin, Heavy-Duty Hopper Front

Akro-Mils Stak-N-Store Plastic Small Part Bins

Akro-Mils Stak-N-Store bins are made for industrial parts that are too heavy or bulky for standard small parts bins. Each bin is rated for 75 lb. Large radius corners, curved upper lips and side ribs add strength, and the side ribs also add stability when bins are stacked. A wide hopper front gives easy access to bulky items, and large comfort-grip handles make lifting and repositioning easier.

75 pounds capacitySide ribs add stabilityComfort grip handlesWide bin opening

Get a Fast Quote →Read the Buying Guide →

Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.

Model Number	Outside L x W x H	Inside L x W x H	Carton Quantity	Price per Carton	View Model
13014	17-1/2" x 10-7/8" 12-1/2"	15-5/8" x 8" x 12-1/4"	Order Qty of 1 equals 4 bins	$54.25	View Model
13017	15-1/4" x 19-7/8" x 12-7/16"	13-5/8" x 17-1/2" x 12-1/4"	Order Qty of 1 equals 3 bins	$60.31	View Model
13018	17-1/2" x 16-1/2" x 12-1/2"	15-5/8" x 13-3/4" x 12-1/4"	Order Qty of 1 equals 2 bins	$34.49	View Model

A load rating is a limit, not a target. A bin held over its rating for weeks deforms permanently even if it never cracks. Weigh a full bin of your actual parts before you choose a size, and size the bin so a full load stays under 75 lb.

The bins stack on the floor or on standard industrial shelving. Akro-Mils does not publish a maximum stacking height, so treat each stacked column as a load that the bottom bin has to carry. On shelving, compare the shelf’s load rating with the combined weight of the bins and their contents.

Three models are available, each 12-1/2 in. high and sold by the carton.

Selecting the Right Stak-N-Store Bin
◆ Load, 75 lb per bin, so weigh a full bin of your parts before choosing
◆ Inside dimensions, 15-5/8 x 8 in. (13014), 13-5/8 x 17-1/2 in. (13017) or 15-5/8 x 13-3/4 in. (13018), all about 12-1/4 in. deep
◆ Footprint, 17-1/2 x 10-7/8, 15-1/4 x 19-7/8 or 17-1/2 x 16-1/2 in. outside, set by your shelf or floor position
◆ Volume, 0.98, 1.7 and 1.6 cu ft for the 13014, 13017 and 13018
◆ Floor or shelf, stack in columns on the floor or on industrial shelving, and check the shelf rating against bins plus contents
◆ Color, gray, red, blue and clear, with white on the 13017, and each carton is one color
◆ Carton quantity, 4 bins for the 13014, 3 for the 13017 and 2 for the 13018, with prices per carton
◆ Stak-N-Store or 30-Series, Stak-N-Store for heavy bulky parts and 30-Series for fine small parts at volume

Not sure what load your bins will carry?
The CustomMHS small parts bins buying guide covers bin load ratings and what happens when a bin is overloaded. Read the Buying Guide

Where Commonly Used
Receiving and staging areas, maintenance stockrooms storing heavy parts, production floor parts stations, warehouse bulk pick locations and tool cribs dispensing heavy consumables.

CustomMHS carries Akro-Mils Stak-N-Store bins. All purchases include the manufacturer’s factory warranty.

Frequently Asked Questions (FAQs)

What are Akro-Mils Stak-N-Store bins?

Stak-N-Store bins are heavy-duty plastic small parts bins rated at 75 pounds each, built for industrial parts that are too heavy or bulky for standard bins. Construction uses reinforced plastic with ribbing, strengthened sidewalls, and large-radius corners that resist cracking, bowing, and deformation. All three models feature a wide hopper front and comfort-grip handles. CustomMHS carries the full line of Akro-Mils bins, backed by the manufacturer's warranty.

How do these compare with 30-Series AkroBins?

The two solve different problems. The 30-Series is optimized for many individual part numbers in smaller, lighter quantities, giving more bin positions with less capacity in each. The Stak-N-Store is for larger, heavier parts where fewer positions are needed but each bin must hold real weight. Choose the 30-Series for fine small-parts organization at volume, and the Stak-N-Store for heavy components, large fasteners, and bulky parts that would overload a standard bin.

What sizes are available?

Three models. The 13014 measures 17-1/2" L x 10-7/8" W x 12-1/2" H outside, the narrowest of the three. The 13017 is 15-1/4" L x 19-7/8" W x 12-7/16" H, the widest, giving the most lateral interior space. The 13018 is 17-1/2" L x 16-1/2" W x 12-1/2" H. Inside dimensions are listed separately for each, since the wall thickness matters at this duty level.

Which dimensions should I use when selecting?

Use both, for different checks. Inside dimensions confirm the part fits with comfortable clearance for retrieval, which is what determines whether the bin actually works for your components. Outside dimensions confirm the bin fits the shelf opening, stacking footprint, or floor position. Sizing to only one of the two is how a bin ends up either too tight for the part or too large for the shelf.

Can these bins stack on the floor as well as on shelving?

Yes, both. For floor-level staging of heavy parts at production positions or receiving areas, the bins stack in columns with no shelf required. For shelf-mounted organization, confirm the shelf's load rating against the combined weight of the bins and their contents before loading, since three or four bins at 75 pounds each adds up quickly against a shelf rating.

How do Stak-N-Store bins help your facility?

The 75 pound rating is the highest per-bin capacity in the Akro-Mils line, and the reinforced construction holds its shape under that load rather than showing the sidewall bowing and floor deflection that lighter bins develop when heavily loaded. That matters in maintenance stockrooms holding cast fittings and dense hardware, and at warehouse pick locations with high-velocity heavy SKUs where bin failure would interrupt a picking shift. Hopper front access then keeps retrieval fast, since parts come out without tilting or removing the bin, and comfort-grip handles make the bins manageable when they do need to be repositioned.