Strong Hold Stainless Steel Wardrobe Cabinet | Hanger Shelf and Tool Storage

Strong Hold Stainless Steel Wardrobe Cabinets | Partitioned Garment and Tool Storage

Strong Hold stainless steel wardrobe cabinets are partitioned combination cabinets in 12-gauge, all-welded stainless steel for environments where garment storage and tool or supply storage must share the same footprint, in a material that resists corrosion, withstands washdowns, and supports sanitation protocols. An internal partition divides the cabinet into two sections: the garment side includes an adjustable 14-gauge hanger shelf for coveralls, jackets, and workwear; the tool and supply side includes adjustable heavy-duty shelves for tools, parts, and supplies. Additional shelves can be added to increase the number of storage positions.

The 3-point locking system secures both sections simultaneously under a single key. Welded 6" 7-gauge legs provide forklift clearance and stability. Shelf capacity varies by width: 1,150 pounds at 36" wide, 700 pounds at 48" wide, 975 pounds at 60" wide, and 850 pounds at 72" wide. Ships fully assembled. Four widths and two heights make up the six-model lineup.

Models and Specifications:

♦ 36-W-245-SS, 36" wide x 24" deep x 72" high (78" OAH). Partitioned interior with adjustable hanger shelf (garment side) and 3 adjustable shelves (tool side). 4 shelves total. 1,150 pounds per shelf. 3-point locking. 6" 7-gauge welded legs. 12-gauge stainless. Ships assembled.

♦ 45-W-244-SS, 48" wide x 24" deep x 60" high (66" OAH). Partitioned interior with adjustable hanger shelf (garment side) and 2 adjustable shelves (tool side). 3 shelves total. 700 pounds per shelf. 3-point locking. 6" 7-gauge welded legs. 12-gauge stainless. Ships assembled.

♦ 46-W-245-SS, 48" wide x 24" deep x 72" high (78" OAH). Partitioned interior with adjustable hanger shelf (garment side) and 3 adjustable shelves (tool side). 4 shelves total. 700 pounds per shelf. 3-point locking. 6" 7-gauge welded legs. 12-gauge stainless. Ships assembled.

♦ 55-W-244-SS, 60" wide x 24" deep x 60" high (66" OAH). Partitioned interior with adjustable hanger shelf (garment side) and 2 adjustable shelves (tool side). 3 shelves total. 975 pounds per shelf. 3-point locking. 6" 7-gauge welded legs. 12-gauge stainless. Ships assembled.

♦ 56-W-245-SS, 60" wide x 24" deep x 72" high (78" OAH). Partitioned interior with adjustable hanger shelf (garment side) and 3 adjustable shelves (tool side). 4 shelves total. 975 pounds per shelf. 3-point locking. 6" 7-gauge welded legs. 12-gauge stainless. Ships assembled.

♦ 66-W-245-SS, 72" wide x 24" deep x 72" high (78" OAH). Partitioned interior with adjustable hanger shelf (garment side) and 3 adjustable shelves (tool side). 4 shelves total. 850 pounds per shelf. 3-point locking. 6" 7-gauge welded legs. 12-gauge stainless. Ships assembled.

Selecting the Right Cabinet:

♦ Width and shelf capacity: the 36" wide model carries 1,150 pounds per shelf, the highest in this lineup. The 48"-wide models carry 700 pounds per shelf. The 60"-wide models carry 975 pounds per shelf. The 72"-wide model carries 850 pounds per shelf. Choose the width based on available floor space, the required garment-hanging rod length, and the shelf load requirements on the tool and supply sides.

♦ Height, 60" vs. 72" nominal, the 60"-nominal models (66" OAH) include 3 total shelves (1 hanger shelf + 2 adjustable shelves on the tool side) and suit positions with lower overhead clearance. The 72"-nominal models (78" OAH) include 4 shelves in total (1 hanger shelf + 3 adjustable shelves). Choose the taller format when additional shelf positions are needed on the tool and supply side.

♦ Partitioned wardrobe vs. full-width wardrobe: this cabinet is a partitioned combination -- the wardrobe side and the shelf side are separated by an internal partition, with each occupying approximately half the cabinet width. A full-width wardrobe (such as the carbon steel VBS-WR series) dedicates its entire interior to hanging garments, with no shelf on one side. Choose this partitioned format when both garment hanging and organized shelf storage are needed in a single locked stainless enclosure. Choose a full-width wardrobe when maximum hanging capacity across the full cabinet width is the priority.

♦ Stainless wardrobe-plus-drawers vs. stainless wardrobe cabinet, the stainless wardrobe-with-drawers cabinet adds 4 or 7 drawers to the tool side in place of some or all shelves, providing organized drawer storage for tools and small parts alongside the garment hanging area. Choose the drawer version when organized drawer storage is needed on the non-garment side. Choose this shelf-only wardrobe when flat shelf storage for larger tools, supplies, or containers is sufficient.

♦ Adjustable hanger shelf height: the hanger shelf on the garment side can be repositioned to provide more hanging clearance for longer garments or more shelf area above shorter garments. Adjust based on the longest garment type to be stored.

Where Commonly Used:

♦ Food Processing and Wet Processing Facilities: workers who change into issued coveralls and store issued tools or PPE accessories at a single washdown-compatible stainless cabinet position keep all position essentials organized and sanitary in a single locked unit.

♦ Pharmaceutical Manufacturing Positions, pharmaceutical production workers who store issued cleanroom garments on the hanger shelf alongside tools, instruments, and supplies on the shelving side use the stainless partitioned format to meet the sanitation and material compliance requirements of regulated manufacturing environments.

♦ Lab Technician and Research Positions: Lab technicians who store a lab coat or cleanroom garment alongside organized lab tools, reference materials, and supplies in a single stainless cabinet at their bench position.

♦ Maintenance Departments in High-Hygiene Facilities, maintenance technicians in food, beverage, or pharmaceutical facilities who change into issued coveralls at the start of the shift and need organized stainless tool storage alongside the garment hanging area without requiring two separate cabinets.

♦ Multi-Shift Industrial Positions, positions where outgoing and incoming workers each need both garment hanging and tool storage in a single locked stainless cabinet that supports shift accountability and withstands the daily cleaning regimen of the facility.

CustomMHS is an authorized Strong Hold distributor. All purchases include the manufacturer's factory warranty.