Containers, Totes and Trays
Keep parts moving and workstations organized with industrial handheld containers and totes built for production floors, warehouses, maintenance departments, and shipping areas. They handle daily abuse, lifting, stacking, staging, and transport while keeping small parts, components, and supplies sorted, protected, and easy to grab. Whether you are feeding an assembly line, running kitting operations, or cleaning up inventory, the right tote system improves speed, accuracy, and ergonomics and cuts the time lost hunting for parts or re-picking the wrong components.
Get a Fast Quote →Read our Buying Guide →
![]() Divider Box Containers
|
![]() Straight Wall Containers
|
![]() Attached Lid Containers
|
![]() Kadon Heavy Duty, Solid & Vented
|
||||
![]() Stack & Nest Container, Solid & Vented
|
![]() Stack Only Fiberglass Container
|
![]() Quantum Cross Stack Tubs
|
![]() Nest Only Container
|
||||
![]() Conveyor, Assembly & Ventilation Trays
|
![]() Metro WavDri Cannabis Drying Tray
|
![]() Part Wash Containers and Baskets
|
![]() Heavy Duty Wire Baskets
|
||||
![]() Modular Stacking Wire Baskets
|
![]() I.D. Label Placards for Containers and Totes
|
||||||
| Handheld containers or totes are widely used in various industries, including manufacturing, logistics, retail, and more, for transporting, storing, and organizing items. They offer a range of benefits that contribute to operational efficiency, organization, and safety.
|
Containers, totes and trays carry parts between workstations for kitting, line feeding and staging. CustomMHS carries divider box, straight wall, attached lid, stack and nest, nest only, cross stack, fiberglass, tray, part wash and wire basket styles from LEWISBins, Buckhorn, Quantum, Akro-Mils, Kadon, MFG, Monoflo, Orbis, Metro and Jesco.
Most of the choice comes down to what happens when a container is empty. Stack only containers have straight or near-straight walls and rigid rims, which gives the most volume and load, but empties take full space. Nest only containers have tapered walls so empties collapse into each other, but they cannot build a stable loaded column. Stack and nest containers have tapered walls and an asymmetric rim, so rotating one 180 degrees engages the rims and lets it stack.
Material and rating limits matter as much as style. HDPE is tough, impact resistant and corrosion proof, and is available in FDA approved formulations. For example, the LEWISBins stack and nest line is rated 0°F to 120°F and the Buckhorn attached lid line -20°F to 120°F, so they are not hot-wash or hot-parts containers. Polypropylene is stiffer and generally better at elevated temperature, and fiberglass composite is used where heat and heavy loads exceed what plastic handles. The MFG stack only fiberglass line is rated -60°F to 250°F. Food contact approval can depend on color, so confirm it for the exact model.
Size by the inside dimensions, not the outside ones in the catalog. A rigid part has to clear the inside bottom, and usable height is always less than the overall height. Check both load ratings: the maximum load per tote, and the load the bottom container can support. A 70 lb tote on a 300 lb bottom support allows about four loaded totes above the bottom one. For static-sensitive parts, ask for the measured surface resistance. Dissipative material in the 10⁶ to 10⁹ ohm range controls discharge, material below 10⁵ ohms is too conductive, and color is not a specification, so verify against your ESD control program under ANSI/ESD S20.20.
Product Lines
Divider box, straight wall and attached lid containers organize parts for storage and transport. Kadon solid and vented tote boxes, stack and nest containers and nest only containers cover the empty-behavior choices. MFG stack only fiberglass containers handle heavy loads and heat. Quantum cross stack tubs, conveyor, assembly and ventilation trays, and Metro drying trays cover production flow. Part wash containers, heavy duty and modular stacking wire baskets suit cleaning and drying, and I.D. label placards identify contents across the facility.
Selecting the Right Model
◆ Empty behavior, choose stack and nest for containers that cycle between full and empty, stack only for heavy loads that stay loaded, or nest only for containers that are mostly empty or ride a conveyor
◆ Style, choose divider boxes for kitting, straight wall for the most cube on a pallet, and attached lid for contents that travel
◆ Size, measure the largest item in all three dimensions and compare it to the inside bottom and the usable height, then confirm pallet and rack bay fit
◆ Load, check the maximum load per tote and the load the bottom container supports, and weigh a realistic full load against what a person should lift
◆ Temperature, choose HDPE for general use within its rated range, polypropylene or fiberglass for higher temperatures, and wire baskets or part wash containers for cleaning
◆ Food contact, choose FDA approved resin and confirm the approval for the exact model and color
◆ Static-sensitive parts, choose ESD containers and confirm the measured surface resistance in ohms against your ESD control program
◆ Airflow, choose vented containers or wire baskets for wet parts and drying, and solid containers to retain small parts and keep dust out
Containers, Totes & Trays Buying Guide
Work out stack, nest or stack and nest before you compare sizes.
See Stack, nest, or both: the math in the Containers, Totes & Trays Buying Guide
Where Commonly Used
Containers, totes and trays are commonly used on assembly lines and in kitting, in warehouses and distribution centers for staging and storage, in washing and drying areas, and in shipping areas where parts are lifted, stacked and moved every day.
CustomMHS carries LEWISBins, Buckhorn, Quantum, Akro-Mils, Kadon, MFG, Monoflo, Orbis, Metro and Jesco containers, totes and trays. All purchases include the manufacturer’s factory warranty.













