Industrial Equipment Experts Since 1980 | Mon–Fri, 7 AM–6 PM ET
No bots. Real experts. 866-333-0728
Get a Fast Quote
Get a Fast Quote

Akro-Mils Straight Wall Plastic Containers

Akro-Mils Straight Wall Plastic Containers Stackable Totes Solid or MeshAkro-Mils Straight Wall Plastic Containers

Akro-Mils straight wall containers are stackable, reusable totes with vertical interior walls and no taper. Straight walls give you the most interior volume for a given footprint and let containers stack cleanly on pallets and in racks without wasted space. The trade-off is that straight wall containers do not nest, so empties take up as much room as full containers. Plan storage and return freight for that.

 

1" wall thicknessLarge handlesSolid or VentedSmooth interior walls

Get a Fast Quote →Read the Buying Guide → 

Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.

Model Number Outside Top (LxWxH) Style Carton Quantity Carton Price View Model
15-3/4"L x 11-3/4" W x 8-1/4"H
Mesh Sides & Bottom
12 Containers Per Carton
$163.00
23-3/4"L x 15-3/4" W x 8-1/4"H
Mesh Sides & Bottom
4 Containers Per Carton
$78.60
23-3/4"L x 15-3/4" W x 12-1/4"H
Mesh Sides & Bottom
3 Containers Per Carton
$63.20
23-3/4"L x 15-3/4" W x 16-1/8"H
Mesh Sides & Bottom
2 Containers Per Carton
$49.50
23-3/4"L x 15-3/4" W x 8-1/4"H
Mesh Sides/Solid Bottom
4 Containers Per Carton
$91.00
23-3/4"L x 15-3/4" W x 12-1/4"H
Mesh Sides/Solid Bottom
3 Containers Per Carton
$74.00
23-3/4"L x 15-3/4" W x 16-1/8"H
Mesh Sides/Solid Bottom
2 Containers Per Carton
$53.45
15-3/4"L x 11-3/4" W x 8-1/4"H
Solid Sides & Bottom
12 Containers Per Carton
$193.00
23-3/4"L x 15-3/4" W x 8-1/4"H
Solid Sides & Bottom
4 Containers Per Carton
$90.70
23-3/4"L x 15-3/4" W x 12-1/4"H
Solid Sides & Bottom
3 Containers Per Carton
$74.00
23-3/4"L x 15-3/4" W x 16-1/8"H
Solid Sides & Bottom
2 Containers Per Carton
$54.70

Wall style is the first decision, because it changes visibility, airflow, drainage, and cleanability. Mesh sides and bottom drain freely and let you see the contents. Mesh sides with a solid bottom keep visibility and airflow while holding liquid and small parts in the floor. Solid sides and bottom fully contain the contents and suit general storage and shipping.

Check the load ratings before you build a stack. A tote has a maximum load for its contents and a separate bottom-container support limit, and stack height is governed by the support limit. Those ratings assume an even, square stack on level ground. The page lists outside dimensions, so confirm inside dimensions for your part before you order. 

Selecting the Right Container
◆ Choose mesh sides and bottom for parts washing, drying, and inspection where liquid must drain and contents must be visible
◆ Choose mesh sides with a solid bottom when you want visibility and airflow but need the floor to hold liquid or small parts
◆ Choose solid sides and bottom for general storage, shipping, and distribution that needs full containment
◆ Choose the 15-3/4" x 11-3/4" footprint for small parts, and the 23-3/4" x 15-3/4" footprint, with three depths, for larger loads
◆ Choose by inside dimensions for the part, and by outside dimensions for the shelf, rack, or pallet
◆ Choose a depth by weight at full load, and confirm the stacking rating before building a stack

To compare straight wall totes with stack-nest and other container types, read our containers, totes, and trays buying guide.


Where Commonly Used
Akro-Mils straight wall containers are commonly used in parts washing and processing, warehouse storage and order picking, closed-loop distribution, and inspection and quality hold areas.


CustomMHS is an authorized Akro-Mils distributor. All purchases include the manufacturer’s factory warranty.

Frequently Asked Questions (FAQs)

What are Akro-Mils straight wall containers?

Akro-Mils straight wall containers are stackable, reusable totes built for warehousing, distribution, and production environments. Straight interior walls maximize usable cube and let containers stack cleanly on pallets and in racks without wasted space. Ten models cover two footprint sizes, three depths, and three wall style configurations, all sold by the carton.

What are the three wall styles, and how do they differ?

Mesh sides and bottom are open on all four sides and the floor, so water and cleaning solution drain freely. Mesh sides with a solid bottom keep the airflow and side visibility but hold liquid and small parts on the floor of the container. Solid sides and bottom fully enclose the contents. The differences come down to visibility, airflow, drainage, and cleanability.

Which wall style should I choose?

Choose mesh sides and bottom for parts washing, drying, and processing, where contents need to be seen, dried, or cleaned without removing them from the container. Choose mesh sides with a solid bottom when you want visibility and airflow but liquid pooling or small parts falling through would be a problem. Choose solid sides and bottom for general storage, shipping, and distribution where contents need full containment and dust-free cleanliness.

What sizes are available?

Two footprints. The small footprint at 15-3/4" x 11-3/4" outside has only two models, the 37208 in mesh sides and bottom and the 37288 in solid, both 8-1/4" deep and 12 per carton. The large footprint at 23-3/4" x 15-3/4" outside covers eight models across all three wall styles in 8-1/4", 12-1/4", and 16-1/8" depths.

What if I need a different depth in the small footprint?

The small footprint only comes in the 8-1/4" depth, so if your parts need more or less clearance in that footprint, the Quantum RSO Series or Monoflo NSO Series offer additional depth options in similar sizes. In the large footprint, the 16-1/8" deep models, the 37676 and 37686, are the deepest available and give the most internal volume per tote.

How do straight wall containers help your facility?

Consistent container geometry is what makes stacking predictable, so pallets and rack positions load to their full height without the wasted space that mismatched containers create. In parts washing and processing, mesh models let parts stay in the container through the full clean and dry cycle rather than being transferred between steps. In quality hold areas, mesh sides allow inspection without opening or moving parts, which speeds up review. And reusable construction supports closed-loop shipping programs that cycle totes between facilities, cutting corrugated usage and per-shipment packaging cost.