Industrial Equipment Experts Since 1980 | Mon–Fri, 7 AM–6 PM ET
No bots. Real experts. 866-333-0728
Get a Fast Quote
Get a Fast Quote

Edge Kadon Heavy Duty Stack and Nest Containers

Kadon Stack-Nest Containers

Edge Kadon stack and nest containers are molded high-density polyethylene totes with 1/4 in. walls and built-in handles. Each one does two jobs. Loaded, the containers stack on one another to build stable columns for storage and transport. Empty, they nest inside one another, so returning or storing them takes far less space than the same number of stacked containers.

High density polyethylene materialsUp to 200 pounds capacity per toteComfortable handles-30 degrees to 150 Degrees range

Get a Fast Quote →Read our Buying Guide → 

Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.

Model Number Outside: L x W x H Inside: L x W x H Capacity Price 1-49 View Model
22" x 13" x 6"
16" x 11" x 5"
150 pounds
$25.30
24" x 16" x 9"
17.5" x 12.75" x 8.75"
200 pounds
$31.00
28" x 17" x 8.75"
22" x 14" x 8"
200 pounds
$33.00

The nesting works through the rim and wall design. Containers stack when their rims engage, and rotating a container 180 degrees changes how it sits on the one below. Training operators on the orientation matters, because containers placed the wrong way can form unstable, half-nested columns.

Nesting is measured by the nest ratio, the number of empty containers that occupy the vertical space of one. Space saved for a given number of empties equals the empties held at peak times (1 minus 1 divided by the ratio). For example, 400 empties at a 4.0 to 1 ratio fit in the space of 100. Edge does not publish a nest ratio for these three models, so request it before you size return lanes.

Three models are available, with outside footprints of 22 x 13, 24 x 16 and 28 x 17 in. and capacities of 150 to 200 lb per container. Pricing is listed by manufacturer model number with quantity breaks.


Selecting the Right Stack and Nest Container

◆ Outside footprint, 22 x 13, 24 x 16 or 28 x 17 in., set by your shelf, conveyor, cart and pallet layout
◆ Inside dimensions, 16 x 11 x 5, 17.5 x 12.75 x 8.75 or 22 x 14 x 8 in., so measure your longest part against the inside length and width
◆ Load rating, 150 lb for the 6 in. deep model and 200 lb for the other two, rated per container
◆ Stack height, because the bottom container must carry the full column, check the combined weight above it, not just each tote
◆ Nest ratio, not published, so confirm it before planning empty storage or return freight

Not sure how nesting affects your space and freight? The CustomMHS containers buying guide shows the nest ratio math and when to choose stack and nest over other styles. Read the Buying Guide

Where Commonly Used
Parts storage, work-in-process moves between cells, closed-loop returnable programs and pick and staging areas.

CustomMHS carries Edge Kadon containers. All purchases include the manufacturer’s factory warranty.