Industrial Equipment Experts Since 1980 | Mon–Fri, 7 AM–6 PM ET
No bots. Real experts. 866-333-0728
Get a Fast Quote
Get a Fast Quote

LEWISbins Flipak Attached Lid Containers

LEWISbins Flipak Attached Lid Plastic Containers

Flipak containers are attached lid totes built for split case picking and shipping. The lid is hinged to the container and recessed inside its perimeter, so it cannot get lost and is protected from breakage while conveyed or shipped. Closed containers stack, and open containers nest for space-saving storage and return.

Solid textured bottomErgonomic handlesStackable & NestableReinforced hinge

Get a Fast Quote →Read the Buying Guide → 

Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.

Model Number Outside Top Inside Bottom Product Clearance Quantity Discounts View Model
11.9" long x 9.8" wide x 7.7" high
8.7" long x 6.4" wide
6.5
$15.90
15.2" long x 10.9" wide x 9.7" high
12.2" long x 7.3" wide
8.8"
$18.15
19.7" long x 11.8" wide x 7.3" high
16.2" long x 8.6" wide
6.0"
$16.05
21.9" long x 15.2" wide x 9.3" high
18.5" long x 12.8" wide
8.4"
$18.02
22.3" long x 13" wide x 12.8" high
18.9" long x 10.1" wide
12.5"
$21.19
21.8" long x 15.2" wide x 12.9" high
18.1" long x 12.3" wide
11.8"
$21.19
26.9" long x 16.9" wide x 12.6" high
23.6" long x 13.9" wide
11.5"
$23.80
23.9" long x 19.6" wide x 12.6" high
20.6" long x 16.5" wide
11.5"
$32.69
27.9" long x 20.6" wide x 15.6" high
25.0" long x 18.0" wide
14"
$39.31
20.6" long x 13.2" wide x 11.6" high
17" long x 10.4" wide
10.5"
$30.00
30.0" long x 22.0" wide x 20.5" high
26.7" long x 18.7" wide
18.8"
$113.00

LEWISbins sells them in colors and clear. The data sheet lists colored containers in high-density polyethylene and clear containers in polypropylene. Reinforced 1/4 in. or 3/8 in. holes take security tote closures, and quick-release label areas sit on the cover and ends. Orbis gives no numeric nest ratio, so ask before you size return freight with the formula in the guide.

Eleven models are listed, from 11.9 in. to 30 in. long and 7.3 in. to 20.5 in. tall outside. Every row shows outside top, inside bottom and product clearance, and the clearance height is the one to check against your product.


Product Lines
FP03 and FP06 are the small models (11.9 and 15.2 in. long). FP075 is the low profile model (19.7 x 11.8 x 7.3 in.). FP13, FP143, FP151 and FP182 are the mid-size models, 20.6 to 22.3 in. long. FP243, FP261 and FP403 are the large models, 23.9 to 27.9 in. long. FP60 is the largest at 30 x 22 x 20.5 in. outside. Clear versions exist for FP03, FP06, FP075, FP143, FP182, FP243 and FP261.

Selecting the Right Model
◆ Size by the inside bottom dimensions and the product clearance height, not the outside size.
◆ Check the footprint against your conveyor, shelving or tote rack.
◆ Choose clear when operators must see contents without opening the lid.
◆ Ask about security holes, closures, metal hinges and detached lids for your process.

Thinking about returnable packaging for distribution?
See the returnable packaging section

Where Commonly Used
Split case picking, route delivery and closed-loop distribution where product loss and carton failure add cost.

CustomMHS carries the full line of LEWISbins Flipak attached lid containers, backed by the manufacturer’s warranty.