Industrial Equipment Experts Since 1980 | Mon–Fri, 7 AM–6 PM ET
No bots. Real experts. 866-333-0728
Get a Fast Quote
Get a Fast Quote

Attached Lid Plastic Containers and Totes, 11.9 x 9.8 to 34 x 24 in

Attached-lid plastic containers are reusable stack-and-nest totes designed to improve security, efficiency, and space utilization in distribution, fulfillment, and storage operations. Integrated attached lids keep contents covered and contained during picking, handling, and transport, helping protect products from dust, debris, and accidental exposure. These containers provide a consistent, professional alternative to corrugated cartons in fast-paced logistics environments.

Get a Fast Quote →Read the Buying Guide →  

Monoflo Attached Lid Plastic Containers


Monoflo Attached Lid Plastic Containers


Reusable construction replaces disposable cartons in fast-paced logistics operations.


Shop Monoflo Attached Lid Containers →

Akro-Mils Attached Lid Plastic Containers

Akro-Mils Attached Lid Plastic Containers

Integrated lid keeps contents covered and protected during picking and transport.

Shop Akro-Mils Attached Lid Containers →
Buckhorn Attached Lid Plastic Containers

Buckhorn Attached Lid Plastic Containers

Durable attached lid protects contents from dust, debris, and exposure.


Shop Buckhorn Attached Lid Containers →
 tote

LEWISbins Attached Lid Plastic Containers

The secure lid attachment supports repeatable, reusable container performance.


Shop LEWISbins Flipak Attached Lid Containers →
LEWISbins Clear Attached Lid Plastic Containers

LEWISbins Clear Attached Lid Containers

Clear construction lets you see the contents without opening the container.


Shop LEWISbins Clear Flipak Containers →
Quantum Heavy Duty Attached Lid Containers 

Quantum Attached Lid Plastic Containers

Stack-and-nest design saves space while keeping contents secure and covered.


Shop Quantum Heavy Duty Attached Lid Containers →
 

An attached lid container has a hinged lid molded onto the tote, so the lid cannot be lost or mismatched and the contents stay covered through picking, transport and storage. Many nest when the lids are open, so you do not necessarily give up empty density, and the lids on many models accept seals or padlocks. CustomMHS lists attached lid containers from Monoflo, Akro-Mils, Buckhorn, LEWISbins and Quantum, from 11.9 x 9.8 x 7.7 in up to 34 x 24 x 19.6 in outside.

Nest ratio is the number to compare when empties travel back. Four hundred empties at a 4.0:1 ratio occupy the space of 100, and at 2.5:1 they occupy 160, so ask for the nest ratio and whether the model nests with the lid closed or open. Check two load figures: the capacity per container, which runs from 40 to 100 lb across these lines, and the stacked capacity, which limits how high you can build a column. Size by the inside bottom dimensions, since the part has to clear them, and remember that tare weight is freight you pay on every leg.

If the container rides a conveyor, confirm a textured bottom on the model. Most plastic totes of this type are HDPE, and HDPE is frequently rated only to about 120°F, so check the published range before washing. FDA approval can depend on the color, so confirm the specific color and ask for documentation.


Product Lines
Monoflo DC Series attached lid totes with plastic or metal hinge pins, Akro-Mils attached lid containers rated up to 100 lb, Buckhorn attached lid containers from 40 to 100 lb, LEWISbins Flipak and Clear Flipak containers, and Quantum heavy duty attached lid containers with published stacked capacities.

Selecting the Right Model
◆ Footprint, choose the outside footprint for the conveyor, sort system, vehicle or rack opening, then choose the depth for the load height
◆ Inside size, choose by the inside bottom dimensions for the product, not the outside
◆ Nesting, ask for the nest ratio and whether the model nests with the lid closed or open
◆ Load, check both the per-container capacity and the stacked capacity, since stack height follows the second
◆ Security, choose a model with a padlock eye, reinforced seal holes or a tamper-resistant lid for shipments between sites
◆ Visibility, choose LEWISbins Clear Flipak when contents should be confirmed without opening the lid
◆ Duty cycle: Choose a Monoflo metal hinge pin model for high daily cycle counts or heavier loads
◆ Conveyors, choose a textured bottom and confirm it on the specific model
◆ Temperature and food contact, check the published temperature range, and confirm FDA approval for the specific color

Containers, Totes & Trays Buying Guide
Shipping between sites or to a customer?
See the attached lid row in choosing by application in the Containers, Totes & Trays Buyer’s Guide

Where Commonly Used
Attached lid containers are commonly used in distribution and fulfillment, retail replenishment, store and route delivery, closed-loop reusable shipping, and internal transfers between buildings.

CustomMHS carries Monoflo, Akro-Mils, Buckhorn, LEWISbins and Quantum attached lid plastic containers. All purchases include the manufacturer’s factory warranty.

Frequently Asked Questions (FAQs)

What are attached lid plastic containers used for?

Attached lid containers are commonly used for reusable shipping, storage, and distribution in warehouses, retail logistics, and industrial operations.

What makes attached lid totes different from standard storage bins?

These containers feature hinged lids that stay connected to the tote, providing secure closure and protecting contents during transport and handling.

Are attached lid containers stackable?

Yes. Attached lid totes are designed to stack securely when closed, making them ideal for efficient storage and shipping.

Do these containers nest when empty?

Absolutely. Many attached lid containers are designed to nest when the lids are open, helping reduce return shipping volume and saving space.

Are attached lid totes suitable for shipping and distribution use?

Yes. These reusable shipping totes are widely used for order fulfillment, internal transfers, and supply chain operations requiring durable, repeatable transport packaging.

Do you offer quantity discounts for large orders?

Yes. Many attached lid tote products include quantity price breaks. Contact our team if you're ordering in volume or outfitting a logistics operation.

Is the manufacturer’s warranty included with my purchase?

Yes. All products sold on CustomMHS.com include the original manufacturer’s warranty unless otherwise noted. Custom MHS is an authorized dealer for the brands we carry, which means your purchase is covered by the manufacturer's full factory warranty.

Why purchase from CustomMHS.com?

CustomMHS.com supports manufacturing and distribution operations that need equipment that fits right the first time. We specialize in storage and material handling and help you select the correct configuration upfront to avoid errors that cause delays, reorders, and costly downtime. To make price comparisons simple and fair, we reference the manufacturer’s model number on our listings and quotes whenever available. That way, you can compare the exact same item across suppliers apples to apples, so you can verify you’re getting the best deal without guessing whether the specs match.