Section OneWhich saves more on return freight?
It depends on whether the container comes back empty.
Short answer: Collapsible containers save return freight whenever empties travel. If the container never leaves your building, or comes back full, a rigid container is stronger and costs less.
Quick answers- Collapsible: Folds down for the empty leg. More empties per trailer, fewer return loads.
- Rigid: Stronger and cheaper to buy. Takes the same space empty as full.
- The formula: Trips saved per year = A x (1 - U / C), where A is annual empty-return loads, U is containers per trailer upright and C is containers per trailer collapsed.
Bulk containers are roughly pallet-size boxes rated from 1,200 to 5,000 lb. The collapsible ones have hinged walls that fold onto the base. Whether that feature pays depends entirely on your return leg.
A note on this guideThis guide is written from published manufacturer data and my own experience quoting this equipment. It is general guidance and my opinion, not engineering advice. Confirm the rating for your exact model and application before you order.
Section TwoThe return freight formula
Three numbers give you the answer.
Short answer: Trips saved per year equals your annual empty-return loads, multiplied by one minus the upright count divided by the collapsed count.
Davco publishes both counts for its KDW-01 collapsible wire container: 144 fit a 53 ft truck upright and 324 fit collapsed. That is 2.25 times as many per trailer.
Worked example
You send back 100 trailer loads of empty containers a year. With U = 144 and C = 324:
Trips saved = 100 x (1 - 144 / 324) = 100 x 0.556 = about 55.
The 100 empty loads drop to about 45. Multiply the 55 saved loads by what you pay per return load on that lane and compare the result with the price difference between collapsible and rigid containers for the fleet.
Use your own trailer countThe counts depend on footprint, collapsed height and how high your carrier lets you stack. Get U and C for the exact model before you decide.
Section ThreePublished collapsed heights
The fold ratio is on the spec sheet.
Short answer: The plastic collapsibles we list fold to roughly 12-1/2 to 14 in. from erect heights of about 34 to 46 in.
Collapsible containers: erect vs. collapsed| Model | Footprint | Erect | Collapsed | Capacity | Tare |
|---|
| Buckhorn BH48453400 | 48 x 45 in. | 34 in. | 13.6 in. | 2,500 lb | 163 lb |
| Buckhorn Intrepid BZ484046 | 48 x 40 in. | 45.9 in. | 13.8 in. | 2,500 lb | 196 lb |
| Monoflo BC4844-34 | 48 x 44.5 in. | 33.8 in. | 12.5 in. | 1,800 lb | 118 lb |
| Davco KDW-01 (wire) | 40.5 x 34.5 in. | 26 in. | See data sheet | 3,200 lb | See data sheet |
Buckhorn publishes a 3.3 to 1 return ratio for the Intrepid BZ484046. The 34 in. BH model folds to 13.6 in., which is 2.5 to 1 on height. Taller containers fold to about the same collapsed height as shorter ones, so the taller the container, the better the ratio.
Knock-down designs come apart completely for the most compact empty state, at the cost of more labor each cycle.
Section FourWhat rigid containers do better
Folding walls are a trade, not a free feature.
Short answer: Rigid containers carry the highest loads, cost less and have no hinges or latches to damage.
Published capacities by construction| Construction | Capacity | Strength | Limit |
|---|
| Plastic, collapsible | 1,200 to 2,500 lb | Light, washable, rust-free | Lower load ceiling |
| Sheet metal, 40.5 x 34.5 in. | 3,200 lb | High load, contains debris | Heavy, rusts if the coating is breached |
| Wire mesh, collapsible, 40.5 x 34.5 in. | 3,200 lb | Visibility and airflow | Small parts fall through without a liner |
| Wire mesh, rigid, 54 x 44 in. | 5,000 lb | Highest load listed | Takes full space empty |
The 5,000 lb figure belongs to a rigid wire container, the Davco GM-5131. If your loads are dense castings, forgings or stampings, capacity may decide the question before freight does.
Within a footprint, taller means lower rated. The Buckhorn BN series in 48 x 45 in. is rated 2,500 lb at 25 and 34 in. tall and 2,000 lb at 39 in. and up.
Section FiveChoosing by situation
Find the row that matches your loop.
Short answer: Empties traveling means collapsible. Empties staying put means rigid.
Supplier loop: ships full, returns empty
Collapsible. Run the formula in section two.
In-plant storage and work in process only
Rigid. You never pay for the empty leg.
Ships full both directions
Rigid. There is no empty leg to save.
Seasonal use, stored empty for months
Collapsible, to recover floor space in the off season.
Loads over 2,500 lb
Metal or wire. Collapsible wire and sheet metal are listed at 3,200 lb, rigid wire to 5,000 lb.
Food contact
Buckhorn Intrepid BZ484046, made of FDA material, with no drop door.
Automotive returnable program
48 x 45 in. collapsible, the automotive standard footprint.
Section SixStacking, tare and common mistakes
The details that change the answer after the order.
Short answer: Count tare weight in every calculation, and check the stacking limit before you plan trailer loads.
- Stacking. Maximum containers above = stacking capacity divided by (load per container plus tare). Davco publishes a maximum of five full bins for its 40.5 x 34.5 in. collapsible line.
- Tare. Size dollies and lift equipment to gross weight. A 2,500 lb load in a 163 lb container is 2,663 lb.
- Fill line. The Monoflo BC4844-34 has 27.9 in. of interior height and a 27 in. fill line for stacking. Load above the line and the next container will not seat.
- Shipping collapsibles back erect. Collapsible walls only save freight if someone folds them. Build the step into the return process.
- Filling by volume instead of weight. A dense load reaches the weight limit long before the container is full. At 100 lb per cubic foot, a 48 x 45 in. container hits 2,500 lb at about 20 in. of fill.
For footprints, drop doors and brand details, see our bulk containers guide.
Section SevenFrequently asked questions
The questions I hear most on quote calls.
Do collapsible bulk containers really save on freight?
Yes, when empties are shipped back. Davco publishes 144 KDW-01 containers per 53 ft truck upright and 324 collapsed, which is 2.25 times as many per trailer.
How do I calculate return freight savings?
Trips saved per year equals annual empty-return loads multiplied by one minus the upright trailer count divided by the collapsed trailer count. With 100 loads, 144 upright and 324 collapsed, about 55 loads are saved.
How far do collapsible containers fold down?
The plastic models we list fold to about 12-1/2 to 14 in. The Buckhorn BH48453400 goes from 34 in. erect to 13.6 in. collapsed.
When is a rigid bulk container the better choice?
When the container stays in your building, ships full both ways, or carries loads above what collapsible plastic is rated for.
How much weight can a bulk container hold?
Plastic collapsibles are rated 1,200 to 2,500 lb. Sheet metal and collapsible wire are listed at 3,200 lb, and rigid wire up to 5,000 lb.
What is the return ratio of a collapsible container?
It is how many collapsed containers fit in the space of one erect container. Buckhorn publishes 3.3 to 1 for the Intrepid BZ484046.