Industrial Equipment Experts Since 1980 | Mon–Fri, 7 AM–6 PM ET
No bots. Real experts. 866-333-0728
Get a Fast Quote
Get a Fast Quote

CustomMHS Buyer's Guide

How Much Spill Containment Do You Need? Sizing Pallets and Decks for Drum Storage

The sump has to hold a set fraction of what is stored above it. The rule has two parts, and which part applies depends on how many drums you have.

Written and reviewed by: Tom McGovernPublished: November 2026Covers: Little Giant spill control platforms and palletsQuestions: 866-333-0728
Section One

How much spill containment do you need?

The federal benchmark is in the hazardous waste container rule.

Short answer: Containment must hold the greater of 10 percent of the total volume of all containers, or the full volume of the largest container. For up to ten 55 gallon drums, that is 55 gallons.

Quick answers
  • The rule: The greater of 10 percent of total volume or 100 percent of the largest container. EPA 40 CFR 264.175(b)(3).
  • One to ten 55 gallon drums: 55 gallons of containment.
  • More than ten drums: 10 percent of the total. Twenty drums need 110 gallons.
  • One IBC tote: The full volume of the tote.

That rule is written for hazardous waste container storage areas. It is also widely used as the yardstick for secondary containment generally. Your state, your local code or your own environmental plan may ask for more, so check which rules apply to what you store.

A note on this guide

This guide is written from published manufacturer data and my own experience quoting this equipment. It is general guidance and my opinion, not engineering advice. Confirm the rating for your exact model and application before you order.

Section Two

The rule, worked for 55 gallon drums

Two calculations, and you take the larger answer.

Short answer: Calculate 10 percent of the total. Compare it with the largest single container. Use whichever is bigger.

Containment needed for 55 gallon drums
DrumsTotal volume10 percent of totalLargest containerContainment needed
155 gal5.5 gal55 gal55 gal
2110 gal11 gal55 gal55 gal
4220 gal22 gal55 gal55 gal
8440 gal44 gal55 gal55 gal
10550 gal55 gal55 gal55 gal
12660 gal66 gal55 gal66 gal
201,100 gal110 gal55 gal110 gal

The answer is 55 gallons all the way up to ten drums, because one full drum is always the bigger number. At ten drums the two are equal. Past ten, the 10 percent figure takes over.

Mixed containers

If you store different sizes together, the largest one sets the floor. Two 55 gallon drums and one 30 gallon drum total 140 gallons. Ten percent is 14 gallons, the largest container is 55, so you need 55.

It applies to each containment area

Do the calculation for each sump separately. Four two-drum pallets are four containment areas, each of which has to hold 55 gallons, not one area that holds 55 between them.

Section Three

The other requirements

Capacity is one of four things the rule asks for.

Short answer: The base has to be sound, liquid has to drain away from the containers, and flammables need bonding when you dispense.

What the rules require
RequirementDetailSource
CapacityGreater of 10 percent of total volume or the largest container40 CFR 264.175(b)(3)
BaseFree of cracks or gaps and sufficiently impervious40 CFR 264.175(b)
DrainageSloped or designed so liquids drain away from the containers40 CFR 264.175(b)
ExemptionWastes with no free liquids, subject to conditions40 CFR 264.175(c), (d)
Bonding when dispensing flammablesNozzle and container electrically interconnectedOSHA 1910.106(e)(6)(ii)

A spill platform handles the drainage requirement with a grated deck: the drum sits on the grate and anything that leaks falls into the sump below it. That also keeps the drum out of its own spill.

Section Four

Types of containment units

The Little Giant line we carry, by how the drum gets on.

Short answer: Choose low profile for hand trucks and pallet jacks, fork liftable to move the unit loaded, a cart to bring containment to the work, and a rack platform to dispense.

Little Giant spill containment
TypeModelsUse it when
Low profile platform palletsSSB-5125, SSB-5151, SSB-5176Drums are loaded by pallet jack or hand truck
Fork liftable palletsSST-2632-66, SST-5125, SST-5125-66, SST-5151The unit is moved by forklift
Mobile platform cartsSSB-5125-6PYBK, SSB512566-6PYBK, SSB-5151-6PYFLContainment has to travel to the point of use
Platform with drum rackSST-5125-1D (1 drum), SST-5151-2D (2 drums)Drums are stored horizontally for dispensing
IBC palletsSST-IBC, SST-IBC-2 with dispensing accessStoring or dispensing from IBC totes
Ask for the sump capacity

Sump capacity in gallons is the number that matters, and it is not shown on every listing. Before you order, ask us for the sump capacity of the exact model and check it against the table in section two.

Section Five

Load capacity: the second check

The platform has to carry the drums as well as catch the spill.

Short answer: A full steel 55 gallon drum weighs about 500 lb. Four of them are about 2,000 lb.

Drum weights
DrumApproximate weight
55 gal of water459 lb of liquid
Empty steel drum20 to 40 lb
Full steel drumAbout 500 lb
Full poly drumAbout 465 lb
Drum of oil or syrupCan exceed 550 lb

Worked example

Four drums of a heavy fluid at 550 lb each: 4 x 550 = 2,200 lb on the platform. Containment needed is 55 gallons. The unit you choose has to show both a sump of at least 55 gallons and a load rating above 2,200 lb. If it is a mobile cart, the casters have to carry that too.

For moving and lifting the drums themselves, see our drum and cylinder handling guide.

Section Six

Choosing by situation, and common mistakes

Find your row, then check the list.

Short answer: Most errors come from counting sumps together and forgetting that rain and debris fill a sump too.

One to four drums, loaded by hand truck
Low profile platform pallet.
Drums delivered and moved by forklift on the unit
Fork liftable pallet.
Dispensing at several machines
Mobile platform cart.
Dispensing from a horizontal drum
Platform with drum rack.
IBC tote
IBC containment pallet, sized to the full tote.
More than ten drums in one area
Size to 10 percent of the total, or split into separate containment areas.
  • Adding sumps together. Each sump is its own containment area.
  • Leaving liquid or debris in the sump. Anything already in the sump takes capacity away. Keep sumps empty and clean.
  • Checking gallons and not pounds. Check the load rating against full drums.
  • Ignoring chemical compatibility. The material in the drum has to be compatible with the unit. Ask before storing aggressive chemicals.
  • Dispensing flammables without bonding. Bond the nozzle and container when dispensing flammable liquids.
Section Seven

Frequently asked questions

The questions I hear most on quote calls.

How much spill containment do I need for a 55 gallon drum?

55 gallons. Under 40 CFR 264.175(b)(3), containment must hold the greater of 10 percent of the total volume or the volume of the largest container, and one full drum is the larger figure.

How much containment do four drums need?

55 gallons. Four drums total 220 gallons, 10 percent is 22 gallons, and the largest container is 55 gallons, so 55 governs.

When does the 10 percent rule take over?

Above ten 55 gallon drums. At ten drums, 10 percent of 550 gallons equals 55. Twenty drums need 110 gallons.

What is the EPA spill containment rule?

EPA 40 CFR 264.175 requires a containment system for hazardous waste container storage with capacity for the greater of 10 percent of the total container volume or the volume of the largest container.

How much does a full 55 gallon drum weigh?

A full steel drum weighs about 500 lb. Drums of oil or syrup can exceed 550 lb.

Do I need containment for an IBC tote?

If the rule applies to what you store, containment for a single tote has to hold the full volume of that tote, since it is the largest container.

About the author. Tom McGovern has worked in the industrial material handling industry since 1981, bringing over 45 years of hands-on experience helping businesses select the right equipment for their applications. His expertise includes specifying and quoting Little Giant spill control platforms, pallets and carts and drum storage racks.

Questions about this guide? Call 866-333-0728 to speak with an experienced material handling specialist.

Ready for a quote?

Send us these details and a material handling specialist will reply, typically within one business day.

  • Dimensions
    Size of the load and the space it goes in
  • Load
    Weight per item, shelf or level
  • Quantity
    How many units you need
  • Delivery ZIP code
    For freight pricing
  • Drawing
    A sketch, photo or spec sheet, if you have one
Get a Fast Quote Call 866-333-0728

Want us to match a containment unit?

Tell us how many drums or totes, what is in them and how they are moved, and we will recommend a platform and confirm the sump capacity. Quote requests are answered within 24 hours by a real person.

866-333-0728

Browse spill containment and dispensing at custommhs.com

Browse all drum and cylinder handling

Get a fast quote

No bots. No guesswork. Real experts.

Specification sources

CustomMHS drum and cylinder handling guide and Little Giant listings · EPA 40 CFR 264.175 · OSHA 29 CFR 1910.106.

Published figures are current as of November 2026 and are subject to change by the manufacturer. This guide is written from published manufacturer data and my own experience quoting this equipment. It is general guidance and my opinion, not engineering advice. Confirm the rating for your exact model and application before you order.