Industrial Equipment Experts Since 1980 | Mon–Fri, 7 AM–6 PM ET
No bots. Real experts. 866-333-0728
Get a Fast Quote
Get a Fast Quote

CustomMHS Buyer's Guide

Turntable vs. Semi-Automatic Stretch Wrap Machines: How Many Pallets a Day Justifies One?

Most stretch wrap machines are both: a turntable that is semi-automatic. The real choice is between hand wrapping, a semi-automatic turntable and a fully automatic machine.

Written and reviewed by: Tom McGovernPublished: November 2026Covers: Handle-It stretch wrap machinesQuestions: 866-333-0728
Section One

Turntable or semi-automatic?

The two words describe different things.

Short answer: Turntable describes how the machine wraps: the pallet spins. Semi-automatic describes how much the operator does: attach the film, start the cycle, cut the film. Most machines we list are semi-automatic turntables.

Quick answers
  • Turntable: The load rotates on a platform while the film carriage travels up and down a mast.
  • Semi-automatic: The operator attaches the film and starts the cycle. The machine wraps.
  • Automatic: The machine attaches, seals and cuts the film too.
  • Mobile: The machine travels around the load instead of rotating it. For long, heavy or unstable loads.

So the question to answer is where you are on this ladder: wrapping by hand, a semi-automatic turntable, or an automatic. The Handle-It line covers the last two, plus a mobile unit.

A note on this guide

This guide is written from published manufacturer data and my own experience quoting this equipment. It is general guidance and my opinion, not engineering advice. Confirm the rating for your exact model and application before you order.

Section Two

The Handle-It models

Six machines, each for a different situation.

Short answer: The differences are pre-stretch, loading height and how much the operator has to do.

Handle-It stretch wrap machines
ModelTypePublished detail
SWM-SA-0600Semi-automatic, low profileThree wrap cycles; photo-eye height sensing; powered turntable and mast
SWM-SA-0800Semi-automatic4,400 lb capacity; 86 in. maximum wrap height; electromagnetic film tension; 150% stretch
SWM-SA-850PSSemi-automatic, powered pre-stretch250% powered pre-stretch; 86 in. height; 18 custom cycles; rack-and-pinion carriage
SWM-SA-1200ULSemi-automatic, ultra-low profileNo ramp needed; 250% pre-stretch; around 200 pallets per day
SWM-SA-1100AA-CAutomaticAutomatic film attach, seal and cut; remote control standard; around 300 cycles per day
SWM-MR-3000MobileTravels around the load; for long, heavy or unstable loads; touchscreen control

Loading height matters as much as wrapping. A standard turntable needs a fork truck or a ramp. The ultra-low SA-1200UL lets a pallet jack roll straight on.

Section Three

Pre-stretch: where the film savings come from

This is the number that pays for the machine.

Short answer: Pre-stretch is how far the machine stretches the film before it goes on the load. Higher pre-stretch uses less film per pallet.

At 150% pre-stretch, 1 ft of film off the roll becomes 2-1/2 ft on the load. At 250%, 1 ft becomes 3-1/2 ft.

Worked example

Say a pallet takes 350 ft of stretched film to wrap.

  • At 150% pre-stretch: 350 / 2.5 = 140 ft of film off the roll.
  • At 250% pre-stretch: 350 / 3.5 = 100 ft of film off the roll.

That is 40 ft less per pallet, about 29 percent less film, for the same wrap. At 100 pallets a day it is 4,000 ft of film a day. Hand wrapping usually stretches film less than a machine does, so measure your own hand-wrap usage for the comparison.

The 350 ft figure is an example. Measure your own by weighing a roll before and after ten pallets.

Section Four

How many pallets a day justifies a machine?

There is no single number. There is a calculation.

Short answer: Add up what hand wrapping costs you per pallet in film and labor, do the same for a machine, and multiply the difference by pallets per year.

  1. Film per pallet by hand. Roll weight used per pallet, times your film price per pound.
  2. Labor per pallet by hand. Minutes to hand wrap one pallet, times your labor rate.
  3. The same two figures on a machine. Use the pre-stretch math in section three, and the operator's time to attach, start and cut.
  4. Savings per year. Hand cost per pallet minus machine cost per pallet, times pallets per day, times working days.
  5. Payback in years. Machine price divided by savings per year.

The published Handle-It figures give you the top end of each machine: around 200 pallets a day on the SA-1200UL and around 300 cycles a day on the automatic SA-1100AA-C. Well below those counts, a basic semi-automatic is the usual starting point.

Savings beyond film and labor

A machine wraps every pallet the same way, at the same tension. That matters for load stability in transit and for the operator's back. Those do not show up in the calculation, and they are often the reason people buy.

Section Five

Choosing by application

Find the row that matches your dock.

Short answer: Volume picks the automation level. The load picks the machine style.

Moving up from hand wrapping, moderate volume
SWM-SA-0600 or SWM-SA-0800.
Film cost is the main concern
SWM-SA-850PS or SWM-SA-1200UL, both 250% pre-stretch.
Pallets arrive by pallet jack
SWM-SA-1200UL. No ramp.
Loads up to 4,400 lb and 86 in. tall
SWM-SA-0800.
Around 300 pallets a day, operator stays on the fork truck
SWM-SA-1100AA-C automatic.
Long, heavy or unstable loads that should not spin
SWM-MR-3000 mobile.
Many different load types
SWM-SA-850PS, with 18 custom cycles.
Section Six

Common mistakes

What to check before the machine ships.

Short answer: The usual errors are ignoring how the pallet gets onto the turntable and comparing machines on price instead of film use.

  • Not planning how pallets get on. A pallet jack needs a ramp or an ultra-low machine.
  • Not checking load weight and height. Check your heaviest and tallest load against the published limits. Not every limit is published on every listing, so ask.
  • Buying on price alone. At volume, film is the larger cost. Compare pre-stretch.
  • Spinning unstable loads. A load that should not rotate needs a mobile wrapper.
  • Assuming power and footprint. Power requirements and turntable size are not on every listing. Confirm both for your model.

More on dock equipment in our dock equipment guide.

Section Seven

Frequently asked questions

The questions I hear most on quote calls.

What is the difference between a turntable and a semi-automatic stretch wrapper?

They describe different things. Turntable means the pallet rotates while it is wrapped. Semi-automatic means the operator attaches and cuts the film and the machine does the wrapping. Most machines are both.

How many pallets a day justifies a stretch wrap machine?

There is no single number. Compare film and labor cost per pallet by hand with the same costs on a machine, then multiply the difference by your pallets per year and divide the machine price by that figure.

What is pre-stretch on a stretch wrapper?

It is how far the machine stretches the film before applying it. At 250% pre-stretch, 1 ft of film off the roll becomes 3-1/2 ft on the load.

How much film does higher pre-stretch save?

Going from 150% to 250% pre-stretch uses about 29 percent less film for the same wrap.

Can I load a stretch wrapper with a pallet jack?

Yes, with a ramp or an ultra-low profile machine. The Handle-It SWM-SA-1200UL needs no ramp.

What is a mobile stretch wrapper?

A machine that travels around the load instead of rotating it. The Handle-It SWM-MR-3000 is for long, heavy or unstable loads.

About the author. Tom McGovern has worked in the industrial material handling industry since 1981, bringing over 45 years of hands-on experience helping businesses select the right equipment for their applications. His expertise includes specifying and quoting Handle-It stretch wrap machines and pallet wrappers.

Questions about this guide? Call 866-333-0728 to speak with an experienced material handling specialist.

Ready for a quote?

Send us these details and a material handling specialist will reply, typically within one business day.

  • Dimensions
    Size of the load and the space it goes in
  • Load
    Weight per item, shelf or level
  • Quantity
    How many units you need
  • Delivery ZIP code
    For freight pricing
  • Drawing
    A sketch, photo or spec sheet, if you have one
Get a Fast Quote Call 866-333-0728

Want help picking a wrapper?

Tell us pallets per day, the heaviest and tallest load, and how pallets get to the machine, and we will recommend a model. Quote requests are answered within 24 hours by a real person.

866-333-0728

Browse Handle-It stretch wrap machines at custommhs.com

Get a fast quote

No bots. No guesswork. Real experts.

Specification sources

CustomMHS dock equipment guide and Handle-It stretch wrap machine listings.

Published figures are current as of November 2026 and are subject to change by the manufacturer. This guide is written from published manufacturer data and my own experience quoting this equipment. It is general guidance and my opinion, not engineering advice. Confirm the rating for your exact model and application before you order.