Industrial Equipment Experts Since 1980 | Mon–Fri, 7 AM–6 PM ET
No bots. Real experts. 866-333-0728
Get a Fast Quote
Get a Fast Quote

CustomMHS Buyer's Guide

Chrome, Epoxy or Stainless Wire Shelving: Which Finish Fits Your Environment?

The shelf is the same wire under every finish. The finish decides whether it is still rust-free in the room you put it in.

Written and reviewed by: Tom McGovernPublished: November 2026Covers: Metro · Nexel · Eagle wire shelvingQuestions: 866-333-0728
Section One

Which wire shelving finish do you need?

Choose by moisture first, then by budget.

Short answer: Chrome is for dry rooms only. Epoxy is for coolers, freezers and humid rooms. Stainless is for sterile rooms, cleanrooms and washdown.

Quick answers
  • Chrome: Dry storage only. NSF listed for dry environments only.
  • Epoxy: Walk-in coolers, freezers and high humidity. 15 year rust warranty.
  • Stainless 304 or 316: Sterile environments, cleanrooms and sterile processing. Most durable and most expensive.

Wire shelving is popular because air and light pass through it and it reconfigures without tools. None of that helps if the finish is wrong for the room. Chrome in a walk-in cooler is the single most common wire shelving mistake.

A note on this guide

This guide is written from published manufacturer data and my own experience quoting this equipment. It is general guidance and my opinion, not engineering advice. Confirm the rating for your exact model and application before you order.

Section Two

The finishes one at a time

What each finish is and where it fails.

Short answer: Each step up in corrosion protection costs more. Buy the finish the room requires and no more.

Chrome

The classic bright finish, with a protective lacquer over it. It is the lowest cost and the right choice for stockrooms, dry goods and general warehouse use. In a damp room it can rust under the lacquer where you cannot see it until it breaks through.

Green epoxy

An epoxy coating made for walk-in coolers, freezers and high-humidity rooms. It carries a 15 year rust warranty.

Grey epoxy

The same protection and the same 15 year rust warranty as green, in a color meant for customer-facing areas.

Stainless steel, type 304 and type 316

The most durable metal wire option and the most expensive. Type 304 is usually sufficient. Type 316 adds molybdenum and resists chlorides, so it is the one for salt, bleach and aggressive cleaners. See our cleanroom and stainless guide for more on stainless equipment.

Wire shelving finishes compared
FinishEnvironmentPublished noteRelative cost
ChromeDry storage onlyNSF listed for dry environments only; protective lacquer$
Green epoxyCoolers, freezers, high humidity15 year rust warranty$$
Grey epoxySame as green, customer-facing areas15 year rust warranty$$
Stainless 304 / 316Sterile rooms, cleanrooms, sterile processingMost durable metal wire option$$$$
Section Three

When polymer beats every wire finish

If corrosion is the whole problem, look past wire.

Short answer: Polymer shelving cannot rust and its shelf mats lift off for washing. It is the alternative to stainless in wet and cold rooms.

Metro polymer lines
LineCapacity per shelfCorrosion warrantyRelative price
MetroMax i2,000 lbLifetimeHighest
MetroMax 4800 lbLifetimeMid
MetroMax Q800 lb20 yearsEconomical

Polymer shelf mats are removable, which matters where shelves are washed on a schedule. For constant washdown or a room that never dries out, compare the price of stainless wire with polymer before deciding.

Section Four

Choosing by room

Find the row that matches where the shelving goes.

Short answer: If the room is ever wet or cold, chrome is out.

Dry stockroom, warehouse, parts room
Chrome.
Walk-in cooler or freezer
Green epoxy, or polymer.
High-humidity room, dish room, laundry
Epoxy or polymer.
Retail or customer-facing area that is damp
Grey epoxy.
Cleanroom, sterile processing, lab
Stainless 304. Use 316 where chlorides are present.
Washdown with bleach or salt exposure
Stainless 316, or polymer.
Food storage on the bottom shelf
Any suitable finish, with the bottom shelf at least 6 in. off the floor per FDA Food Code guidance.
Section Five

Capacity, sizing and a worked example

The finish does not change the load rating. The unit does.

Short answer: Metro wire shelving is rated up to 800 lb per shelf evenly distributed and up to 2,000 lb per unit.

Both limits apply. Five shelves at 800 lb each would be 4,000 lb, which is double the 2,000 lb unit limit. On a five-shelf unit the working figure is 2,000 / 5 = 400 lb per shelf if every shelf is loaded equally.

Super adjustable posts let you reposition shelves in 1 in. increments. Standard posts use fixed grooves. If you need more than 800 lb per shelf, MetroMax i polymer is rated 2,000 lb per shelf, and the steel shelving lines in our industrial shelving guide go higher.

Mobile units

A unit on casters carries its own rating. Ask for the mobile rating, not the stationary one.

Section Six

Common mistakes

Each of these shows up as rust within a year or two.

Short answer: Chrome in a damp room is the big one. Mixing finishes in one unit is the next.

  • Chrome in a cooler. It is listed for dry environments only.
  • Mixing finishes. A chrome post under an epoxy shelf rusts at the post. Match every part.
  • Assuming all stainless is the same. Type 304 is not immune to chlorides. Use 316 around salt and bleach.
  • Reading only the shelf rating. The 800 lb shelf rating and the 2,000 lb unit rating both apply.
  • Overbuying. Stainless is the most expensive wire option. In a dry room it buys you nothing.
Section Seven

Frequently asked questions

The questions I hear most on quote calls.

Can chrome wire shelving go in a walk-in cooler?

No. Chrome wire shelving is NSF listed for dry environments only. Use epoxy-coated or polymer shelving in coolers and freezers.

What is the difference between chrome and epoxy wire shelving?

Chrome is a bright plated finish with a protective lacquer for dry rooms. Epoxy is a coating made for coolers, freezers and humid rooms and carries a 15 year rust warranty.

When do I need stainless steel wire shelving?

In sterile environments, cleanrooms and sterile processing, and anywhere the shelving is washed down with aggressive cleaners.

What is the difference between 304 and 316 stainless shelving?

Type 316 adds molybdenum and resists chlorides such as salt and bleach. Type 304 is usually sufficient otherwise.

How much weight does wire shelving hold?

Metro wire shelving is rated up to 800 lb per shelf evenly distributed and up to 2,000 lb per unit. Both limits apply.

Is green epoxy different from grey epoxy?

The protection and the 15 year rust warranty are the same. Grey is intended for customer-facing areas.

About the author. Tom McGovern has worked in the industrial material handling industry since 1981, bringing over 45 years of hands-on experience helping businesses select the right equipment for their applications. His expertise includes specifying and quoting Metro, Nexel and Eagle wire shelving and polymer and steel shelving.

Questions about this guide? Call 866-333-0728 to speak with an experienced material handling specialist.

Ready for a quote?

Send us these details and a material handling specialist will reply, typically within one business day.

  • Dimensions
    Size of the load and the space it goes in
  • Load
    Weight per item, shelf or level
  • Quantity
    How many units you need
  • Delivery ZIP code
    For freight pricing
  • Drawing
    A sketch, photo or spec sheet, if you have one
Get a Fast Quote Call 866-333-0728

Not sure which finish your room needs?

Tell us the room (dry, cooler, freezer, washdown or cleanroom) and what goes on the shelf, and we will match the finish. Quote requests are answered within 24 hours by a real person.

866-333-0728

Browse wire shelving at custommhs.com

Browse all shelving

Get a fast quote

No bots. No guesswork. Real experts.

Specification sources

CustomMHS industrial shelving guide and wire shelving listings · Metro published finish, warranty and capacity data · FDA Food Code guidance on floor clearance.

Published figures are current as of November 2026 and are subject to change by the manufacturer. This guide is written from published manufacturer data and my own experience quoting this equipment. It is general guidance and my opinion, not engineering advice. Confirm the rating for your exact model and application before you order.