Talk to an Expert: 866-333-0728
No bots. No guesswork. Real experts.

  • Your shopping cart is empty!

Menu

Heavy Duty Self-Dumping Hoppers

Heavy Duty Self-Dumping Hoppers, 4,000 lb Capacity

Heavy-duty self-dumping hoppers provide a 4,000-pound capacity solution for daily scrap, waste, and bulk material collection in demanding industrial environments. Built from durable 10-gauge steel bodies with reinforced bases, these hoppers handle heavier daily loads while supporting safe, forklift-compatible dumping.

Models and Specifications:

♦ Jesco Self-Dumping Hopper, 10-gauge body, 8-gauge base. 4,000 lb capacity, 1.0 to 4.0 cubic yards.
♦ MECO Heavy Duty Hopper, 10-gauge body, 7-gauge base. 4,000 lb capacity, 1/4 to 3 cubic yards.
♦ MECO Heavy Duty Hoppers Series 90, 10-gauge body, 1/4" gauge base. 4,000 lb capacity, reinforced base for heavier loads.

Selecting the Right Model:

♦ Base thickness: choose the Series 90's 1/4" reinforced base for the heaviest loads, or the standard 7 or 8-gauge base for general heavy-duty use.
♦ Volume range: choose the Jesco hopper for the widest range at 1.0 to 4.0 cubic yards, or MECO for 1/4 to 3 cubic yards.
♦ Brand fit: choose Jesco or MECO based on specific dimensions and configuration needs.

Where Commonly Used:

♦ Manufacturing Floors, heavy-duty hoppers collect and discharge scrap without manual shoveling.
♦ Machine Shops, reinforced bases withstand repeated dumping of heavier debris.
♦ Warehouses and Distribution Centers, 4,000-pound capacity supports demanding daily waste collection.
♦ High-Volume Production Areas, forklift-compatible design supports efficient scrap collection.

CustomMHS carries the full line of Jesco and MECO heavy-duty self-dumping hoppers, backed by each manufacturer's warranty.

 


jesco hopper

Jesco Self-Dumping Hopper, 10-gauge body, 8-gauge base

4,000-pound capacity hopper spans 1.0 to 4.0 cubic yards for heavier daily loads.

 View All → 

 

 Imagem

MECO Heavy Duty Hopper, 10-gauge body, 7-gauge base

4,000-pound capacity hopper spans 1/4 to 3 cubic yards for daily industrial use.

 View All → 

 

Imagem

MECO Heavy Duty Hoppers Series 90, 10-gauge body, 1/4" gauge base

4,000-pound capacity hopper with a reinforced base for heavier loads.

 View All → 

 

 

Frequently Asked Questions (FAQs)

What is a heavy duty self-dumping hopper?
A heavy duty self-dumping hopper is a 4,000 pound capacity steel container that a forklift lifts, transports, and tips to discharge material without the operator handling the load by hand. A release mechanism rotates the body forward to dump, then returns it upright for the next cycle. CustomMHS carries heavy-duty self-dumping hoppers from Jesco and MECO, backed by each manufacturer's warranty.
How is heavy duty different from medium duty?
Two things change. Capacity doubles from 2,000 to 4,000 pounds, and the body steel steps up from 12-gauge to 10-gauge, which is thicker and resists denting and deformation from heavier material. If your hopper cycles daily with dense scrap, the heavier body keeps it in service rather than developing bulges and seam stress over a few years.
Which base thickness should I choose?
The base absorbs the impact of material dropping in and the abrasion of material sliding out during each dump, so it wears before the walls do. The MECO Series 90 uses a 1/4" reinforced base for the heaviest loads in this group, the MECO Heavy Duty uses a 7-gauge base, and the Jesco model uses an 8-gauge base. Sharp or dense material such as metal turnings and castings argues for the thicker base even within the same 4,000 pound rating.
What volume should I select?
The Jesco hopper spans 1.0 to 4.0 cubic yards and MECO covers 1/4 to 3 cubic yards. Size the volume by how often you want the hopper emptied, not by weight alone. Light, bulky material fills a hopper long before it reaches 4,000 pounds, while dense scrap hits the weight limit while the hopper still looks half full, so check your material against both numbers before selecting.
How do heavy duty self-dumping hoppers help your facility?
The main gain is removing shoveling and manual transfer from scrap handling, since material goes in where it is generated and comes out at the dumpster without anyone touching it. That eliminates the repetitive bending and lifting that manual cleanup demands and cuts the number of trips a worker makes across the floor with smaller containers. In high volume production areas, the 4,000 pound capacity means fewer dump cycles for the same tonnage, so a forklift spends less time on waste runs and more on production work. Keeping a hopper at the machine also contains scrap rather than letting it build up around the work area, which supports housekeeping and safe footing on the floor.

Built for Manufacturers, Warehouses &
Industrial Facilities

CustomMHS is an authorized distributor of industrial storage and material handling equipment for manufacturers, warehouses, distribution centers,
and industrial facilities across North America. From shelving systems and pallet racking to storage containers, workbenches, carts, security fencing, and cabinets,
we carry industrial-grade brands and help you choose the right specs, load ratings, and configuration for your facility, workflow, and space before you order.