Logitrans SELFSR 1003 Non-Adjustable Box Holder Rotator with Straddle Legs, Electric Lift and Drive, 2,200 lb, 36" to 75" Lift
Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.
| Model Number | Fork Size | Lifting Height | Capacity | Price | View Model |
|
22" or 27" wide x 49" long
|
36"
|
2,200 pounds
|
$25,626.15
|
||
|
22" or 27" wide x 49" long
|
47"
|
2,200 pounds
|
$25,888.50
|
||
|
22" or 27" wide x 49" long
|
55"
|
2,200 pounds
|
$26,150.85
|
||
|
22" or 27" wide x 49" long
|
63"
|
2,200 pounds
|
$26,418.15
|
||
|
22" or 27" wide x 49" long
|
75"
|
2,200 pounds
|
$26,675.55
|
The straddle legs pass on the outside of the load instead of under it, which lets the load sit lower to the floor and adds stability. The rotator can handle solid-deck, closed-bottom and custom base pallets and containers, which the fork-over SELFR 1003 cannot, and the legs need more aisle width because of the wider stance. The holders are fixed at one width, so the fork width and the holder width are both ordered specifications, and a fixed holder cannot be changed later the way an adjustable one can. The rotator tilts loads beyond 90 degrees, and Logitrans recommends clamps when tilting more than 60 degrees.
Tilting switches off automatically when the rotation center is above 46.5" or below 27" from the floor, so the taller models do not give a larger tilting window. Because the SELFSR has an electric lift and an electric drive, your Buying Guide treats it as a powered industrial truck under OSHA 29 CFR 1910.178, which means operator training, a workplace evaluation and certification, with each operator evaluated at least once every three years.
♦ Fork Size: 22" or 27" wide x 49" long, with straddle legs
♦ Lifting Heights: 36", 47", 55", 63" and 75"
♦ Capacity: 2,200 pounds
♦ Box Holder Width: fixed, ordered with the fork width
♦ Tilt: beyond 90 degrees, clamps recommended above 60 degrees
♦ Power: electric lift and electric drive
Selecting the Right SELFSR 1003 Model
◆ Straddle legs or fork-over, choose straddle legs for solid-deck, closed-bottom or custom base pallets, and the lower-priced fork-over SELFR 1003 for open-entry pallets and skids
◆ Powered drive, choose the SELFSR 1003 when operators move between stations all shift or travel distances are long, and the manual-push ELFSR 1001 when they are short
◆ Fixed or adjustable, choose the SELFSR 1003 when every box is the same width, and the adjustable SELFSRA 1003 (31.5" to 48") when one unit has to handle several widths
◆ Holder width, record both the fork width and the holder width on the order, and call 866-333-0728 to confirm available sizes
◆ Lifting height, all five models carry 2,200 lb to their full height, so choose the height that fits your operators, and remember that tilting only works while the rotation center is between 27" and 46.5"
◆ Aisle width, allow for the wider stance of the straddle legs when planning travel paths
◆ Battery, ask about the battery, charger and charge time before you order, since these are not published on the model pages
◆ Operator training, plan for operator training and evaluation under OSHA 29 CFR 1910.178
Lift Equipment Buying Guide
Record the fork span and the holder width on every fixed-holder order.
See Box holder rotators in the Reel Lifts & Rotators Buying Guide
Where Commonly Used
The SELFSR 1003 is commonly used where rotators work all shift with one standard box size on solid-deck, closed-bottom or mixed pallets, such as high-cycle picking, sorting, kitting and component supply between stations.
CustomMHS is an authorized Logitrans distributor. All purchases include the manufacturer’s factory warranty.