Part Washing Containers and Baskets, 12 x 9 x 6 to 25-3/4 in Long
Part Washing Containers and Baskets are industrial material-handling solutions designed to support parts during cleaning, rinsing, draining, and drying. Designed for manufacturing and processing environments, these containers and baskets allow effective exposure to water, detergents, and air while keeping parts organized and protected. Proper container selection directly affects cleaning quality, cycle time, and overall process efficiency.
Get a Fast Quote →Read our Buying Guide →
![]()
|
![]() Kadon Large Wash Baskets, 18" x 12" x 6"
|
MFG Fiberglass Wash Containers
|
Zinc-Plated or Stainless-Steel Mesh Parts Baskets with Handles
|
Part washing containers and baskets hold parts through washing, rinsing, draining and drying, so liquid and air reach every surface and nothing pools. A general-purpose tote is the wrong substitute, because wash temperature and detergent chemistry are exactly the conditions that shorten a tote’s life. CustomMHS lists three materials: Kadon stainless steel wash baskets in 12 x 9 x 6 in and 18 x 12 x 6 in, MFG fiberglass wash containers from 16-1/2 to 25-3/4 in long with drain holes and slotted sidewalls, and Jesco heavy duty wire baskets in zinc plated or stainless steel from 16 x 10 x 4-1/2 in to 24 x 13-1/4 x 8 in.
Confirm three things before a container goes near a washer: temperature, drainage and chemistry. Wash cycles run hot, and HDPE totes are frequently rated only to about 120°F, so a standard tote is not a wash line container. MFG publishes continuous service from -60°F to 250°F for its fiberglass wash containers, with intermittent tolerance to 300°F. Solid-bottom containers hold water, so look for drain holes, slotted sidewalls, perforations or open wire. Fiberglass covers a pH range of 3.0 to 10.0, and steel wire has the highest temperature tolerance of these materials, so specify the finish for your wash chemistry and corrosion exposure.
Opening size matters as much as basket size. Smaller perforations retain finer debris and smaller particles while still draining, so choose an opening smaller than your smallest part. The Kadon patterns include a 3/16 x 5/8 in slot at 56% open area, a .187 in round perforation at 66%, 1/8 in round perforations, and .023 in wire mesh at 52% or 60% open area. Some Kadon models include a liner insert.
Product Lines
Kadon stainless steel part wash baskets in 12 x 9 x 6 in (10 models) and 18 x 12 x 6 in (4 models), with or without inserts, MFG fiberglass wash containers (10 models, nest-stack and stack only), and Jesco heavy duty wire baskets (10 models) in zinc plated or stainless steel.
Selecting the Right Model
◆ Process, choose a Kadon stainless steel basket for aqueous, ultrasonic and spray washers, an MFG fiberglass container for hot washing and rinsing, and a Jesco wire basket for degreasing, curing and open-air processing
◆ Size, choose the 12 x 9 x 6 in Kadon basket for small precision parts and the 18 x 12 x 6 in for larger batches, and check the size against your washer basket carrier
◆ Opening size, choose a perforation or mesh opening smaller than your smallest part, since smaller openings retain fine debris and still drain
◆ Inserts, choose a Kadon model with or without the liner insert, depending on your smallest part
◆ Temperature, check the rated range against your actual wash cycle, since HDPE totes are frequently rated to about 120°F
◆ Drainage, choose drain holes, slotted sidewalls, perforations or open wire, since solid-bottom containers hold water
◆ Finish, choose zinc plated or stainless steel Jesco wire to match your wash chemistry and corrosion exposure
◆ Stacking, choose MFG nest-stack or stack only containers, or stackable Jesco baskets, to match how baskets are stored between cycles
Containers, Totes & Trays Buying Guide
Washing at temperature?
See wash lines in the Containers, Totes & Trays Buyer’s Guide
Where Commonly Used
Part washing containers and baskets are commonly used in automated, ultrasonic and spray washers, manual clean-down stations, batch cleaning and degreasing, and post-wash draining and staging.
CustomMHS carries Kadon, MFG and Jesco part washing containers and baskets. All purchases include the manufacturer’s factory warranty.



