What are Kadon Small Part Wash Baskets used for?

Kadon Small Part Wash Baskets are used to hold small, delicate, or precision components during washing, rinsing, and cleaning processes. They are suitable for controlled batch handling and help keep parts grouped together to reduce the risk of loss or mix-ups.

How do small part wash baskets help protect delicate components?

Small-part wash baskets protect delicate components by containing items during agitation, spraying, immersion, or transfer, reducing the chance of collision or misplacement. They support proper drainage while preventing small items from falling through.

What key features should buyers know about Kadon Small Part Wash Baskets?

Buyers should know that Kadon Small Part Wash Baskets are designed for durability, part containment, and control of the cleaning process, with various perforation liners and mesh sizes available.

How do inserts affect lid selection for Kadon Small Part Wash Baskets?

Inserts determine how lids secure contents inside the baskets. Compression lids with inserts hold parts near the top of the basket, while locking lids without inserts secure the basket across its full depth.

Where are Kadon Small Part Wash Baskets commonly used?

These baskets are commonly used in manufacturing, machining, maintenance, medical devices, aerospace, electronics, and precision cleaning environments.

Is the manufacturer’s warranty included with my purchase?

Yes, all products sold on CustomMHS.com include the original manufacturer’s warranty unless otherwise noted. Custom MHS is an authorized dealer for the brands we carry.

Do you offer bulk pricing or discounts on large orders?

Yes, many products on CustomMHS.com include automatic quantity price breaks, and you can email us for project pricing on larger orders.

Why purchase from CustomMHS.com?

CustomMHS.com supports operations requiring correctly configured storage and material-handling equipment, helping avoid ordering errors and making the purchasing process more accurate and efficient.

Kadon IP-SBNI-1209-08 Small Parts Wash Basket, No Insert | 12 x 9 x 6 in., #08 Stainless Mesh Liner

Manufacturer: Edge - Kadon Containers & Bins

$115.00 each

MFG's Part Number: IP-SBNI-1209-08

Price-match guarantee
Usually ships within 2-5 business days.

Larger Quantities: Use Quote Form

Quantity

You need to choose the mandatory option to add this product to the cart.

Need higher volume or project pricing?
Request a quote for this model

Quick Specs
◆ Ordering a quantity of 1 provides 1 basket.
◆ Outside: 12" long x 9" wide x 6" tall.
◆ Inside: 9-1/2" long x 6-1/2" wide x 5-1/2" tall.
◆ Liner: #08 stainless steel mesh, .023" wire diameter with .102" openings, 60% open area
◆ Capacity: 50 pounds
◆ Temperature Rating: 190°F for 22 minutes or less
◆ Construction: High-density plastic outer frame with a stainless steel mesh liner
◆ Color: Black
◆ Container is furnished without insert.

Why Use This Product
The IP-SBNI-1209-08 is the same small parts wash basket as the IP-SB-1209-08, sold without the insert. It has the same 12 by 9 by 6 inch body, the same #08 stainless mesh and the same 50 pound capacity. The mesh is woven from .023 inch wire with .102 inch openings, about 1/10 inch. That holds smaller parts and finer chips than the 1/8 inch round-hole #03 liner, with slightly more open area (60 percent against 58), so it works well for small screws, springs, pins and fine machined parts. Choose this version if you use a drop-in lid or run the basket with no lid, because it costs less than the version with the insert. If your process uses Kadon locking or compression lids, choose the IP-SB-1209-08. The high-density plastic frame resists almost all industrial chemicals and detergents.

Key Features Explained
◆ #08 Stainless Mesh Liner: .023 inch wire with .102 inch openings holds parts and chips down to about 1/10 inch, with 60 percent open area.
◆ Fine Retention, Good Flow: Holds smaller parts than the 1/8 inch round-hole liner while keeping slightly more open area for flushing and drainage.
◆ Plastic Frame, Stainless Mesh: High-density plastic resists almost all industrial chemicals and detergents, won’t rust, rot or splinter, and costs less than an all-stainless basket.
◆ Washer Temperature Rating: Rated for 190°F for 22 minutes or less, covering typical heated wash cycles.
◆ No Insert, Lower Cost: Made for use with a drop-in lid or no lid, and priced below the IP-SB-1209-08 with insert.

Best-Fit Use Cases
◆ Small Fastener and Spring Cleaning: Small screws, springs and pins washed without losing parts through the liner.
◆ Precision Machined Parts: Fine turned and machined components held in a spray or immersion washer.
◆ Chip Removal: Parts washed after machining, with fine chips held in the basket instead of the washer.
◆ Open or Drop-In Lid Processes: Wash lines that run baskets uncovered or with a simple drop-in lid.

Ready to Order
The Kadon IP-SBNI-1209-08 is sold individually and usually ships within 2 to 5 business days. Add it to your cart to order now.

CustomMHS carries Kadon wash baskets. All purchases include the manufacturer’s factory warranty.

Watch Product Video

Outside dimensions: 12" long x 9" wide x 6" high. ♦ Inside Dimensions: 9.5" long x 6.5" wide x 5.5" high. ♦ Wire Pattern: .023" wire dia. with .102" open space with 60% open area. ♦ Capacity: 50 pounds. ♦ Wash baskets are rated for 190F degrees for 22 minutes or less. ♦ Container is furnished without insert.

Product Information

Want to be sure you’re paying the lowest price?
We guarantee it.

We stand behind our pricing. If you find the same product at a lower price from an authorized dealer selling the identical model number, let us know. Fill out the form below with the competing price and a link, and we'll verify and respond within 1 business day. We want to earn your business.

If you find one of our products with lower price than ours, please use this form. We will compare the prices and will offer you the product on the same price!

Here’s how it works:

1. Found a cheaper price?
2. Ask us for a price match - Just fill out the form and we’ll check the details.

Please fill in the form below: * Required fields