Logitrans EHSI Stainless Steel Electric Stacker

Imagem

Logitrans EHSI Stainless Steel Electric Stacker, Fork-Over Design, 2,200 lb, 47" to 112"

The Logitrans EHSI is a battery-powered lift and manual push stacker, built from AISI 316L stainless steel for hygienic production environments. It is the stainless-steel counterpart to the standard ELF fork-over series, combining full stainless-steel construction with electric lift for facilities that require frequent powered stacking in washdown or regulated areas.

The fork-over design works with standard pallets, open-bottom pallets, and skids. The electric lift raises loads at the push of a button across six height options, from 47" to 112". The ergonomic handle supports a relaxed grip during manual pushing, and rounded corners protect surrounding surfaces and goods during transport.

All models share the same 22" wide x 45" long forks. Capacity is 2,200 lb for five models and decreases to 1,760 lb at the 112" model; see the height selection guide below before choosing.

Standard painted steel stackers corrode, trap contaminants, and degrade under repeated cleaning with sanitizing agents. The EHSI eliminates those issues with full AISI 316L stainless steel construction throughout, making it suitable for food processing, pharmaceutical, beverage, medical device, and other regulated or washdown environments where standard equipment is not acceptable. The electric lift eliminates manual pumping effort, which is especially valuable in facilities where operators frequently stack throughout the shift and fatigue is a concern.

Selecting the Right Model:

♦ Lift height and capacity: Five of the six EHSI models carry the full 2,200 lb capacity to their rated height. The EHSI-1000-112 carries a reduced 1,760 lb. If your loads regularly approach 2,200 lb, the EHSI-1000-96 is the tallest model that maintains full rated capacity. If you need to reach above 96" and your loads are under 1,760 lb, the 112" model is a good fit.
♦ EHSI vs. EHSSI: fork-over vs. straddle leg; both are stainless steel, battery-powered lift, manual push stackers with 2,200 lb capacity and AISI 316L construction. The EHSI's fork-over design works with standard, open-bottom, and skid pallets but not closed-bottom pallets, and carries a lower price point. The EHSSI's straddle legs handle all pallet types, including closed-bottom, at a higher price point. If your operation uses only open-bottom or standard pallets, the EHSI is the more cost-effective stainless choice. If you handle closed-bottom pallets, the EHSSI is the correct selection.

Where Commonly Used:

The EHSI is used in food processing and pharmaceutical facilities requiring frequent powered stacking in washdown or regulated areas, in beverage and medical device production where standard painted steel equipment is not acceptable, and in any high-cycle operation where electric lift eliminates the fatigue of manual pumping over a full shift.

CustomMHS is an authorized Logitrans distributor. All purchases include the manufacturer's factory warranty.

Buying Guide

This is the exact situation our Mobile Lift Equipment & Stackers guide warns about: the tallest EHSI model doesn't carry the same capacity as the shorter ones, so ask for capacity at your actual working height, not the headline number, before you order.

Mobile Lift Equipment & Stackers Buying Guide →

Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.

Model Number	Fork Size	Lifting Height	Capacity	Price	View Model
EHSI-1000-47	22" wide x 45" long	47"	2,200 pounds	$16,691.40	View Model
EHSI-1000-55	22" wide x 45" long	55"	2,200 pounds	$16,953.75	View Model
EHSI-1000-63	22" wide x 45" long	63"	2,200 pounds	$17,221.05	View Model
EHSI-1000-80	22" wide x 45" long	80"	2,200 pounds	$21,948.30	View Model
EHSI-1000-96	22" wide x 45" long	96"	2,200 pounds	$22,205.70	View Model
EHSI-1000-112	22" wide x 45" long	112"	1,760 pounds	$22,477.95	View Model

Frequently Asked Questions (FAQs)

What is the Logitrans stainless steel stacker designed for?

This stainless steel stacker is built for environments where cleanliness, corrosion resistance, and reliable lifting are essential. It is commonly used to handle palletized goods in food processing, pharmaceuticals, and other hygienic workplaces. The design supports smooth lifting while maintaining a clean, durable frame that withstands washdown or moisture-prone conditions. It is a specialized solution for facilities that cannot compromise on sanitation.

How does an electric lift improve handling in a manual push stacker?

The electric lift allows the operator to raise and lower loads with minimal physical effort, while the manual push steering keeps maneuvering simple and precise. This combination reduces strain during frequent stacking and positioning tasks. It also supports controlled load placement, which is important when handling sensitive products or working in narrow storage areas. The result is a balance of efficiency and straightforward operation.

Why is stainless steel important in hygienic and corrosive environments?

Stainless steel resists rust and corrosion far better than painted or standard steel equipment. This makes it ideal for facilities exposed to water, cleaning chemicals, or high humidity. It also supports strict hygiene standards since surfaces are easier to clean and maintain. For operations with sanitation requirements, stainless construction is often a necessity rather than a luxury.

Where is this stacker most commonly used?

This type of stacker is frequently found in food production, commercial kitchens, cold storage, and pharmaceutical warehouses. It works well in areas where pallet handling is needed, but equipment must remain clean and resistant to contamination. It is also useful in tight indoor spaces where an electric lift improves productivity without requiring a full-powered ride-on truck. Many facilities rely on it for daily staging, stacking, and transport tasks.

What advantages does a hygienic stacker provide compared with standard equipment?

A hygienic stacker reduces the risk of corrosion, equipment breakdown, and contamination in sensitive work areas. It also extends the machine's service life in demanding environments, improving long-term value. Operators benefit from easier cleaning routines and dependable lifting performance. For businesses focused on compliance and cleanliness, it provides peace of mind along with practical efficiency.

Why purchase the Logitrans stainless stacker from CustomMHS.com?

Buying from CustomMHS.com means you get expert help selecting equipment that fits both your handling needs and your hygiene standards. We understand the demands of clean environments and can guide you toward solutions that protect product integrity while improving workflow. Our goal is to provide dependable material handling equipment backed by knowledgeable support, not just a transaction. When sanitation, performance, and trusted service matter, CustomMHS.com is the right place to buy.

Is the manufacturer’s warranty included with my purchase?

Yes. All products sold on CustomMHS.com include the original manufacturer’s warranty unless otherwise noted. Custom MHS is an authorized dealer for the brands we carry, which means your purchase is covered by the manufacturer's full factory warranty.

Do you ship nationwide?

Yes. We ship throughout the United States and Canada using trusted freight partners experienced in handling industrial equipment. Our team coordinates shipping details to ensure safe and efficient delivery.

Built for Manufacturers, Warehouses &
Industrial Facilities

CustomMHS is an authorized distributor of industrial storage and material handling equipment for manufacturers, warehouses, distribution centers,
and industrial facilities across North America. From shelving systems and pallet racking to storage containers, workbenches, carts, security fencing, and cabinets,
we carry industrial-grade brands and help you choose the right specs, load ratings, and configuration for your facility, workflow, and space before you order.