Logitrans SELFR 1003 Non-Adjustable Box Holder Rotator, Electric Lift and Drive, 2,200 lb, 36" to 75" Lift

The Logitrans SELFR 1003 rotator with non-adjustable box holders lifts, rotates and tilts boxes, crates and containers of one standard width, and it drives itself, so the operator walks with it instead of pushing. Both the lift and the drive are electric. It is rated 2,200 lb and comes in five lifting heights: 36", 47", 55", 63" and 75" (models SELFR 1003-36, SELFR 1003-47, SELFR 1003-55, SELFR 1003-63 and SELFR 1003-75), with 22" or 27" wide x 49" long fork-over forks specified at order.
Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.
| Model Number | Fork Size | Lifting Height | Capacity | Price | View Model |
|
22" or 27" wide x 49" long
|
36"
|
2,200 pounds
|
$24,304.50
|
||
|
22" or 27" wide x 49" long
|
47"
|
2,200 pounds
|
$24,581.70
|
||
|
22" or 27" wide x 49" long
|
55"
|
2,200 pounds
|
$24,834.15
|
||
|
22" or 27" wide x 49" long
|
63"
|
2,200 pounds
|
$25,101.45
|
||
|
22" or 27" wide x 49" long
|
75"
|
2,200 pounds
|
$25,101.45
|
The holders are fixed at one width, so the fork width and the holder width are both ordered specifications, and a fixed holder cannot be changed later the way an adjustable one can. The rotator tilts loads beyond 90 degrees, and the fork-over design needs open-entry pallets or skids with accessible leg openings. For solid-deck or closed-bottom pallets, choose a straddle leg model such as the ELFSRA 1001 or the SELFSRA 1003.
Powered drive is the largest price step in the Logitrans rotator family. It adds more than half again to the price of the manual-push ELFR 1001, so it pays off where operators move between stations all shift or travel distances are long. Because the SELFR has an electric lift and an electric drive, your Buying Guide treats it as a powered industrial truck under OSHA 29 CFR 1910.178, which means operator training, a workplace evaluation and certification, with each operator evaluated at least once every three years.
♦ Fork Size: 22" or 27" wide x 49" long, fork-over
♦ Lifting Heights: 36", 47", 55", 63" and 75"
♦ Capacity: 2,200 pounds
♦ Box Holder Width: fixed, ordered with the fork width
♦ Tilt: beyond 90 degrees
♦ Power: electric lift and electric drive
Selecting the Right SELFR 1003 Model
◆ Fixed or adjustable, choose the SELFR 1003 when every box is the same width, and the adjustable SELFRA 1003 (31.5" to 48") when one unit has to handle several widths
◆ Powered drive, choose the SELFR 1003 when operators move between stations all shift or travel distances are long, and the manual-push ELFR 1001 when they are short
◆ Holder width, record both the fork width and the holder width on the order, and call 866-333-0728 to confirm available sizes before ordering
◆ Pallet type, fork-over needs open-entry pallets, so choose the ELFSRA 1001 or the SELFSRA 1003 for solid-deck or closed-bottom pallets
◆ Lifting height, all five models carry 2,200 lb to their full height, so choose the height that fits your operators, and confirm the tilting window for this model, since Logitrans limits tilting to a range of rotation-center heights (27" to 46.5" on the ELFR 1001)
◆ Remote control, a cable remote for rotation, lifting and lowering is standard, and a wireless remote is a priced upgrade
◆ Battery, ask about the battery, charger and charge time before you order, since these are not published on the model pages
◆ Operator training, plan for operator training and evaluation under OSHA 29 CFR 1910.178
Lift Equipment Buying Guide
Record the fork span and the holder width on every fixed-holder order.
See Box holder rotators in the Reel Lifts & Rotators Buying Guide
Where Commonly Used
The SELFR 1003 is commonly used where rotators work all shift with one standard box size, such as high-cycle picking, sorting, kitting and component supply between stations.
CustomMHS is an authorized Logitrans distributor. All purchases include the manufacturer’s factory warranty.