Lift Products LPBLU‑20‑1 Low Profile U‑Lift Scissor Lift Table | 2,200 lb Capacity

Lift Products Low Profile U‑Lift Scissor Lift Table – Model LPBLU‑20‑1

This lift features all the safety benefits of our Low Profile Guardian Series Lift Tables. The low-profile feature provides greater flexibility for tall pallet applications and operator height differences. The "U" shaped low-profile table is ideal for handling wire baskets, containers, and plastic and wooden open-bottom pallets. This design allows loading with either a 21" wide manual or electric pallet truck without a loading ramp. Installation costs are reduced since the need for a floor pit is eliminated. Additionally, any potential tripping hazard that a ramp might pose is removed.

♦  Capacity: 2,200 pounds.
♦  Platform Size: 50" x 55.88"
♦  Lowered height: 3.13" and 33.88" raised height. 
♦  Lift Speed: 18 seconds. 
♦  Load and unload pallets without the need for a loading ramp
♦ Meets and exceeds both U.S. (ANSI) and EU safety standards
♦ Upper platform fitted with a safety perimeter, which prevents descent on contact
♦ Low-tension (24V) control box with up-down buttons
♦ Electric circuit reset button in case the safety perimeter is actuated
♦ External power pack equipped with a relief valve against overloading
♦ Compensated flow valve for controlling lowering speed
♦ External power pack is supplied with 8-foot-long hoses
♦ Upper limit switch
♦ Designed for use with a 21" wide pallet jack
♦ 115-volt single phase standard
♦ 230/460 voltage three-phase available
♦ Single-acting cylinders with a drainage system
♦ Check the valve to stop the lift table from lowering in case of a hose burst
♦ Safety clearance between the scissors to prevent trapping during operations
♦ Mechanical blocks for safe maintenance operations
♦ Self-lubricating bushings on pivot points
♦ Removable lifting eye(s) to facilitate installation of the lift table

Typical Uses
♦  Pallet Loading & Unloading (with Pallet Jacks): Ideal for loading full or partial pallets using a standard 27″ wide pallet jack directly onto the platform without a ramp.
♦ Assembly Line Support: Offers height adjustability for workers assembling components, thereby reducing the risk of bending and lifting injuries.
♦  Packing & Shipping Stations: Raise loads to optimal ergonomic height for labeling, sorting, or shrink-wrapping.
♦  Work Positioning for Heavy Materials: Allows operators to rotate, tilt, or adjust heavy components at safe, accessible heights.
♦  Warehouse & Distribution Centers: Assists in staging goods, order picking, or loading onto conveyors and transport equipment.
♦  Printing, Textile, and Food Processing Lines: Handles skids of materials that need height variation during process steps or transitions.
♦  Machinery & Tool Setup: Acts as a mobile support station for tools, molds, or jigs in fabrication environments.