Lift Products LPBL-SG Stainless and Galvanized Guardian Series Low Profile Lift Tables
The Lift Products LPBL-SG is the stainless and galvanized version of the Guardian Series low profile scissor lift table, built for wet applications. It has a stainless steel platform and base, a cold galvanized scissor frame assembly, stainless steel pins, Steel-It epoxy coated cylinders and IP55 electrical connections. The power unit is remote, so it sits away from the table.
Get a Fast Quote →Read our Buying Guide →
Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.
| Model Number | Platform Size | Travel | Capacity | Price | View Model |
|
31.5" wide x 55" long
|
3.25" to 34"
|
1,100 pounds
|
$9,185.03
|
||
|
39.5" wide x 55" long
|
3.25" to 34"
|
1,100 pounds
|
$9,886.91
|
||
|
31.5" wide x 55" long
|
3.25" to 34"
|
2,200 pounds
|
$10,144.44
|
||
|
39.5" wide x 55" long
|
3.25" to 34"
|
2,200 pounds
|
$10,897.90
|
||
|
31-1/2" wide x 55" long
|
3-5/8" to 33-1/8"
|
3,300 pounds
|
$12,982.25
|
||
|
39.5" wide x 61" long
|
3.63" to 33.13"
|
3,300 pounds
|
$14,012.35
|
The LPBL-SG keeps the Guardian low profile heights: 3-1/4" lowered on the 1,100 and 2,200 lb models and 3-5/8" lowered on the 3,300 lb models. Both are well under the seven inches the CustomMHS lift table guide gives as the limit for pallet jack loading, and Lift Products says the low profile design removes the need for a floor pit.
The Guardian safety features carry over. A safety perimeter around the platform stops the descent on contact, with a reset button in the 24 V control box. A check valve stops the table from lowering if a hose bursts, a relief valve protects against overloading, a compensated flow valve controls lowering speed, and there is clearance between the scissors to prevent trapping. Mechanical blocks are built in for maintenance, and the pivot points use self-lubricating bushings. Power is 115 V single phase as standard with 230/460 V three phase available. Options include stainless ramps, hinged ramps, a stainless power box and foot controls. Lift Products states the series meets and exceeds both U.S. (ANSI) and EU safety standards.
Product Lines
The LPBL-SG has six models in three capacities and two platform widths, all on a 29-1/2" x 52-3/4" base frame. The LPBL-10-SG (1,100 lb) and LPBL-20-SG (2,200 lb) have 55" long platforms and raise to 34". The LPBL-30-SG (3,300 lb) has 61" long platforms and raises to 33-1/8". Each capacity comes in a 31-1/2" wide platform (-1) and a 39-1/2" wide platform (-2).
Selecting the Right Model
◆ LPBL-10-1-SG (1,100 lb): 31-1/2" x 55" platform, 3-1/4" lowered, 34" raised, 10 second lift.
◆ LPBL-10-2-SG (1,100 lb): 39-1/2" x 55" platform, 3-1/4" lowered, 34" raised, 10 second lift.
◆ LPBL-20-1-SG (2,200 lb): 31-1/2" x 55" platform, 3-1/4" lowered, 34" raised, 18 second lift.
◆ LPBL-20-2-SG (2,200 lb): 39-1/2" x 55" platform, 3-1/4" lowered, 34" raised, 18 second lift.
◆ LPBL-30-1-SG (3,300 lb): 31-1/2" x 61" platform, 3-5/8" lowered, 33-1/8" raised, 25 second lift.
◆ LPBL-30-2-SG (3,300 lb): 39-1/2" x 61" platform, 3-5/8" lowered, 33-1/8" raised, 25 second lift.
Can a pallet jack load an LPBL-SG table?
Yes. Every model lowers to less than four inches, which is under the seven inch limit for pallet jack loading.
See how lowered height controls loading in the CustomMHS lift table guide.
Where Commonly Used
LPBL-SG tables are commonly used in wet and washdown areas such as food and beverage plants, where pallets are rolled onto the platform from floor level and raised to working height.
CustomMHS carries the full line of Lift Products LPBL-SG stainless and galvanized Guardian Series low profile lift tables, backed by the manufacturer’s warranty.