Presto XZT Series Floor Level Scissor Lift and Tilt Tables
Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.
| Model Number | Platform Size | Travel | Capacity | Price | View Model |
|
44" wide x 48" long
|
3/8" to 33-3/8"
|
2,000 pounds
|
$21,822.89
|
||
|
44" wide x 48" long
|
1/2" to 33-1/2"
|
4,000 pounds
|
$22,585.81
|
||
|
50" wide x 48" long
|
3/8" to 33-3/8"
|
2,000 pounds
|
$22,869.48
|
||
|
50" wide x 48" long
|
1/2" to 33-1/2"
|
4,000 pounds
|
$23,503.16
|
The CustomMHS lift table guide gives seven inches as the limit for pallet jack loading. At 3/8" to 1/2", the XZT is far below that limit. Tilting the load after it is raised brings the far side of a pallet toward the operator, which is why lift and tilt tables are used for picking and packing from full pallets.
Each XZT table comes with an external 1 hp, 115 V single phase power unit that controls both lift and tilt, a pedestal mounted control, and a yellow safety edge for incidental contact. Presto offers an optional foot control, optional power units including three phase, and custom designs.
Product Lines
The XZT Series has four models in two pan widths and two capacities. The XZT44 series has a 44" x 48" pan on a 68" x 61" base, and the XZT50 series has a 50" x 48" pan on a 74" x 61" base. Each width is offered at 2,000 and 4,000 lb. All four models tilt 30 degrees, and loaded lift times run from 39 to 44 seconds.
Selecting the Right Model
◆ XZT44-20 (2,000 lb): 44" x 48" pan, 3/8" lowered, 33-3/8" raised, 30 degree tilt, 68" x 61" footprint, 39 second lift.
◆ XZT44-40 (4,000 lb): 44" x 48" pan, 1/2" lowered, 33-1/2" raised, 30 degree tilt, 68" x 61" footprint, 43 second lift.
◆ XZT50-20 (2,000 lb): 50" x 48" pan, 3/8" lowered, 33-3/8" raised, 30 degree tilt, 74" x 61" footprint, 40 second lift.
◆ XZT50-40 (4,000 lb): 50" x 48" pan, 1/2" lowered, 33-1/2" raised, 30 degree tilt, 74" x 61" footprint, 44 second lift.
Can a hand pallet truck load a Presto XZT table?
Yes. Every XZT model lowers to 1/2" or less, far under the seven inch limit for pallet jack loading.
See how lowered height controls loading in the CustomMHS lift table guide.
Where Commonly Used
Floor level lift and tilt tables are commonly used for picking, packing and palletizing from full pallet loads, and for feeding parts from tilted containers into machines and conveyors.
CustomMHS carries the full line of Presto XZT Series floor level scissor lift and tilt tables, backed by the manufacturer’s warranty.