Presto P4 Series Floor Level Pallet Loader Lift Tables

The Presto P4 is a floor level scissor lift table built for loading and unloading pallets by hand. The platform lowers to 3/8" above the floor, so a hand pallet truck can roll a pallet on or off without a ramp or pit, and it raises to 28". Presto describes the P4 as a floor level loader with extremely narrow side panels, so operators can reach the load with virtually no reach over.
Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.
| Model Number | Platform Size | Travel | Capacity | Price | View Model |
|
44" wide x 48" long
|
3/8" to 28"
|
2,500 pounds
|
$13,201.94
|
||
|
52" wide x 48" long
|
3/8" to 28"
|
2,500 pounds
|
$14,468.15
|
||
|
44" wide x 48" long
|
3/8" to 28"
|
4,000 pounds
|
$19,160.09
|
||
|
52" wide x 48" long
|
3/8" to 28"
|
4,000 pounds
|
$20,687.08
|
The CustomMHS lift table guide gives seven inches as the limit for pallet jack loading. At 3/8", the P4 is far below that limit. Presto also says the P4 can be moved easily with a hand pallet jack, so the table itself can be repositioned without a forklift.
Each P4 comes with an internally mounted 1 hp, 115 V single phase power unit, a photoelectric toe guard, and a prewired 10 ft control cord. The buyer chooses either a NEMA 1 footswitch with cover or a NEMA 4 hand-held push button control with a magnet. Presto offers other voltages and other platform sizes on request.
Product Lines
The P4 Series has four models in two platform widths and two capacities. The 44" x 48" platform models have a 51" x 61" footprint, and the 52" x 48" platform models have a 59" x 61" footprint. Each width is offered at 2,500 and 4,000 lb. All four lower to 3/8" and raise to 28". Loaded lift time is 22 seconds on the 2,500 lb models and 30 seconds on the 4,000 lb models.
Selecting the Right Model
◆ P4-25-4448 (2,500 lb): 44" x 48" platform, 3/8" lowered, 28" raised, 51" x 61" footprint, 22 second lift.
◆ P4-25-5248 (2,500 lb): 52" x 48" platform, 3/8" lowered, 28" raised, 59" x 61" footprint, 22 second lift.
◆ P4-40-4448 (4,000 lb): 44" x 48" platform, 3/8" lowered, 28" raised, 51" x 61" footprint, 30 second lift.
◆ P4-40-5248 (4,000 lb): 52" x 48" platform, 3/8" lowered, 28" raised, 59" x 61" footprint, 30 second lift.
Can a hand pallet truck load a Presto P4 table?
Yes. Every P4 model lowers to 3/8", far under the seven inch limit for pallet jack loading.
See how lowered height controls loading in the CustomMHS lift table guide.
Where Commonly Used
P4 floor level loaders are commonly used for manual palletizing and de-palletizing, packing and order fulfillment, where pallets arrive by hand pallet truck and operators work around all four sides of the load.
CustomMHS carries the full line of Presto P4 Series floor level pallet loader lift tables, backed by the manufacturer’s warranty.