Presto-Lifts XF and WXF Manual Light Duty Scissor Lift Tables

The Presto Manual Light Duty Scissor Lift Table series uses a foot-operated hydraulic pump for smooth, controlled lifting and a hand-operated release for precise lowering. No electrical connection required. Scissor legs are 1/2" thick steel. Cylinders are chrome-plated. All bearings are lifetime lubricated. The hinged platform provides access to internal components in the lowered position for inspection and service. Capacities run from 1,000 to 2,000 lbs across 10 models.
Get a Fast Quote →Read our Buying Guide →
Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.
| Model Number | Platform Size | Travel | Capacity | Price | View Model |
|
24" wide x 36" long
|
5-1/4" to 29"
|
1,000 pounds
|
$4,451.92
|
||
|
24" wide x 36" long
|
5-1/4" to 29"
|
1,500 pounds
|
$4,691.94
|
||
|
24" wide x 36" long
|
7-1/4" to 31"
|
2,000 pounds
|
$6,110.40
|
||
|
24" wide x 48" long
|
5-1/4" to 41"
|
1,000 pounds
|
$4,921.07
|
||
|
24" wide x 48" long
|
5-1/4" to 41"
|
1,500 pounds
|
$5,106.61
|
||
|
24" wide x 48" long
|
7-1/4" to 43"
|
2,000 pounds
|
$6,306.82
|
||
|
36" wide x 36" long
|
5-1/4" to 29-1/4"
|
1,000 pounds
|
$5,357.54
|
||
|
36" wide x 36" long
|
5-1/4" to 29-1/4"
|
1,500 pounds
|
$5,564.85
|
||
|
36" wide x 48" long
|
5-1/4" to 41-1/4"
|
1,000 pounds
|
$5,630.32
|
||
|
36" wide x 48" long
|
5-1/4" to 41-1/4"
|
1,500 pounds
|
$5,804.94
|
Presto XF and WXF tables are foot pump operated hydraulic scissor lifts built for intermittent duty cycles. The operator pumps the foot pedal to raise the platform and uses a hand-controlled release to lower it. Because there is no motor, the table needs no electrical connection and can be placed wherever the load needs to be raised.
The scissor legs are 1/2" steel plate, and the 2,000 lb models use 3/4" thick steel legs. The ram cylinders are chrome plated, and the hinged platform gives easy access to the cylinders. Wide-base models are available, and the manufacturer lists oversized and custom platforms for loads that need more surface.
Lowered height is the first thing to check. The 1,000 and 1,500 lb models lower to 5-1/4", which is under the seven inches the CustomMHS lift table guide gives as the limit for loading with a pallet jack. The 2,000 lb models lower to 7-1/4", so they need another loading method.
Product Lines
The series has 10 models in two platform widths. XF models have a 24" wide platform and WXF models have a 36" wide platform. Each width comes in a 36" or 48" platform length, with 24" x 36" and 24" x 48" on the XF and 36" x 36" and 36" x 48" on the WXF. Capacities are 1,000 and 1,500 lb on both families, and 2,000 lb on the XF family only.
Selecting the Right Model
◆ XF24 (24" x 36" platform): XF24-10 at 1,000 lb and XF24-15 at 1,500 lb lower to 5-1/4" and raise to 29". XF24-20 at 2,000 lb lowers to 7-1/4" and raises to 31".
◆ XF36 (24" x 48" platform): XF36-10 at 1,000 lb and XF36-15 at 1,500 lb lower to 5-1/4" and raise to 41". XF36-20 at 2,000 lb lowers to 7-1/4" and raises to 43".
◆ WXF24 (36" x 36" platform): WXF24-10 at 1,000 lb and WXF24-15 at 1,500 lb lower to 5-1/4" and raise to 29-1/4".
◆ WXF36 (36" x 48" platform): WXF36-10 at 1,000 lb and WXF36-15 at 1,500 lb lower to 5-1/4" and raise to 41-1/4".
Will a pallet jack be loading the table?
Lowered height decides how a pallet gets onto the table, so check it before capacity.
See how lowered height controls loading in the CustomMHS lift table guide.
Where Commonly Used
Manual foot pump lift tables are commonly used at workstations without a power supply, such as assembly, packaging, maintenance and receiving areas where loads are lifted a few times per shift.
CustomMHS carries the full line of Presto XF and WXF manual light duty scissor lift tables, backed by the manufacturer’s warranty.