Presto Lifts Wide Base Scissor Lift Tables

The Presto Lifts XW Series is a wide base scissor lift table built for platforms wider than a standard table can carry. Presto gives these tables a base 12 in. wider than a standard footprint, which makes them stable under oversized platforms, including off-center loads at full capacity. The CustomMHS table lists 23 models from 2,000 to 8,000 lb, with 24, 36, 48, and 60 in. of travel and raised heights from 31 to 70 in.
Hydraulic cylindersErgonomical designUp to 8,000 pounds capacity
Get a Fast Quote →Read our Buying Guide →
Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.
| Model Number | Platform Size | Travel | Capacity | Price | View Model |
|
36" wide x 36" long
|
7-3/4" to 31"
|
2,000 pounds
|
$10,038.14
|
||
|
36" wide x 36" long
|
7-3/4" to 31"
|
4,000 pounds
|
$10,867.41
|
||
|
36" wide x 36" long
|
7-3/4" to 31"
|
6,000 pounds
|
$11,783.61
|
||
|
36" wide x 48" long
|
7-3/4" to 43"
|
2,000 pounds
|
$9,382.73
|
||
|
36" wide x 48" long
|
7-3/4" to 43"
|
4,000 pounds
|
$8,635.00
|
||
|
36" wide x 48" long
|
7-3/4" to 43"
|
6,000 pounds
|
$12,155.35
|
||
|
36" wide x 64" long
|
7-3/4" to 55"
|
2,000 pounds
|
$11,783.61
|
||
|
36" wide x 64" long
|
7-3/4" to 55"
|
4,000 pounds
|
$12,983.47
|
||
|
36" wide x 64" long
|
7-3/4" to 55"
|
6,000 pounds
|
$13,966.01
|
||
|
48" wide x 36" long
|
7-3/4" to 31"
|
2,000 pounds
|
$10,583.74
|
||
|
48" wide x 36" long
|
7-3/4" to 31"
|
4,000 pounds
|
$11,499.95
|
||
|
48" wide x 36" long
|
7-3/4" to 31"
|
6,000 pounds
|
$12,722.68
|
||
|
48" wide x 48" long
|
7-3/4" to 43"
|
2,000 pounds
|
$10,583.74
|
||
|
48" wide x 48" long
|
7-3/4" to 43"
|
4,000 pounds
|
$11,259.74
|
||
|
48" wide x 48" long
|
7-3/4" to 43"
|
6,000 pounds
|
$12,722.68
|
||
|
48" wide x 64" long
|
7-3/4" to 55"
|
2,000 pounds
|
$11,543.41
|
||
|
48" wide x 64" long
|
7-3/4" to 55"
|
4,000 pounds
|
$12,722.68
|
||
|
48" wide x 64" long
|
7-3/4" to 55"
|
6,000 pounds
|
$13,682.34
|
||
|
48" wide x 64" long
|
9" to 57"
|
8,000 pounds
|
$25,510.56
|
||
|
54" wide x 86" long
|
10" to 70"
|
2,000 pounds
|
$17,610.21
|
||
|
54" wide x 86" long
|
10" to 70"
|
4,000 pounds
|
$21,743.97
|
||
|
54" wide x 86" long
|
10" to 70"
|
6,000 pounds
|
$25,095.36
|
||
|
54" wide x 86" long
|
10" to 70"
|
8,000 pounds
|
$30,769.83
|
Construction is built around that wide base. The scissor legs are ¾ in. steel plate, the hydraulic cylinders have chrome-plated rams and polyurethane seals, and the rollers and pivots use lifetime lubricated bearings. A hinged platform gives access to the cylinders, and a maintenance device is part of the standard features. Control is by hand pendant, with a foot control available. Motors run 1 hp on 115 V single phase for the smaller models and 1.5 or 3 hp on 230/460 V three phase for the larger ones, so specify voltage and control type when ordering.
Platform size and capacity are linked on these tables. The platforms in the table are the standard sizes, and larger tops are available up to 60 x 60 in. on the X3W, 72 x 88 in. on the X4W, and 84 x 120 in. on the X4.5W. Presto derates side and end load capacity by 2% for every inch of oversize, and oversized models must be lagged to the floor. Lowered heights are 7¾ in. on most models, so plan how the load gets onto the table before you choose.
Product Lines
The XW Series has three width families. The X3W has a 36 in. wide platform: 36 x 36 in. at 7¾ to 31 in., 36 x 48 in. at 7¾ to 43 in., and 36 x 64 in. at 7¾ to 55 in., each in 2,000, 4,000, and 6,000 lb. The X4W has a 48 in. wide platform: 48 x 36 in. at 7¾ to 31 in., 48 x 48 in. at 7¾ to 43 in., and 48 x 64 in. at 7¾ to 55 in., each in 2,000, 4,000, and 6,000 lb, plus an 8,000 lb model (X4W48-80) at 9 to 57 in. The X4.5W60 has a 54 x 86 in. platform at 10 to 70 in., in 2,000, 4,000, 6,000, and 8,000 lb.
Selecting the Right Model
◆ Match the platform to the load. Choose the standard platform that fully supports the load, or a larger top if it must overhang.
◆ Check end and side capacity, not just rated load. On many models it is lower, for example 3,500 lb on the 4,000 lb X3W36-40.
◆ Rate capacity to your heaviest expected load, including pallets and fixtures, not the average load.
◆ Choose travel by raised height. The 24 in. travel models raise to 31 in., the 36 in. to 43 in., the 48 in. to 55 in. (57 in. on the 8,000 lb model), and the 60 in. travel X4.5W to 70 in.
◆ For oversized platforms, remember the 2% per inch derating and the floor lagging requirement.
◆ Confirm the lowered height against your loading method. Most models lower to 7¾ in., the 8,000 lb X4W to 9 in., and the X4.5W to 10 in.
How does platform size change what a lift table can safely carry?
The Lift Table Buying Guide explains how a larger platform reduces edge and end capacity and what to check before you order one.
Where Commonly Used
Commonly used for large subassemblies, wide pallets, and bulky loads that a standard width table would leave unsupported.
CustomMHS carries the full line of Presto Lifts XW Series wide base scissor lift tables, backed by the manufacturer’s warranty.