TA50 Military Lockers
WireCrafters TA50 Military Gear Lockers Lockers and other types of Storage Lockers for the demanding requirements of the military and other government agencies. Officers prefer WireCrafters Lockers because of their modern look, innovative design, heavy duty materials, and quality construction. These lockers are built to last. Quick to install; rock solid once in place; there is no better choice than WireCrafters Military Storage Lockers.
WireCrafters Military Lockers Features:
Choose from Welded Wire, Woven Wire, Expanded Metal or Sheet Metal.
Choose from tubular or angle structural frame.
Full line of Sliding and Hinged doors available.
Sliding doors have patented tamper resistant latch mechanism.
Pad lock lug standard, key locks available.
Assembly hardware (where required) is inaccessible from the exterior.
Standard 3/8" mounting hardware is the heaviest in the industry.
Heavy duty options available.
Coat and duffle bag hang bars.
Fixed and folding shelves available.
Helmet and equipment inspection hatches.
Shipped set-up or knocked down.
TA 50 Gear Locker Specifications
Furnish all welded TA50 Gear Lockers as manufactured by WireCrafters LLC.,
Size and quantity shall be as specified on the drawings.
Standard Size: 24" deep x 42" wide x 78" high, custom sizes available.
Mesh: 1-1/2" square 10ga. (.135 thick) welded wire standard, other meshes including 1-1/2" 13 gauge expanded metal are also available.
Sides: 1-1/4" x 1-1/4" x 1/8" angle and channel with 1-1/2" square mesh securely welded to frame.
Door(s): 1-1/4" x 1-1/4" x 1/8" angle with 1-1/2" square mesh securely welded to frame. Doors have full length angle strike, three point cane bolt lock on double door units with chrome plated padlock able handle.
Top: Formed 16 gauge sheets with 1-1/4" flanges and formed integral door stop. Top welded to locker frame.
Shelf: Formed 16 gauge sheets with one piece coat rod bolted to underside of shelf. Shelf is securely welded in place.
Bottom: Formed 14 gauge sheet, 4" high, securely welded in place.
Back: 20 gauge sheet metal securely welded to locker frame.
Coat Rod: 3/4" schedule 40 pipe welded to 1/8" x 1-1/4" mounting brackets. Finish is hot dip galvanized.
Coat Hooks: Three per unit standard, mounted on back wall under shelf.
Hardware: All interconnecting and assembly hardware is supplied.
Finish: All non-plated parts shall receive one prime coat of gray acrylic enamel electro-statically applied. Product is finished for interior applications. Materials are subject to nicks and scrapes while in transit. Touch up paint provided. Optional powder coat finish available
Note: Lockers are all welded construction and are shipped fully assembled, floor mount brackets supplied upon request. Ready to assemble version also available.
Custom Sizes Available.